Step by Step HOW TO USE MCNpro Box (Details with Picture)

I.Instalation main software McnPro Box

1.Double click on the setup Mcnpro to start the installation 2.7.6a for main software box MCNpro.For update installer McnPro Box just visit here
http://i47.tinypic.com/2s1uq9z.jpg

2.Click Next to continue the installation process
http://i47.tinypic.com/33w8ker.jpg

3.in *******r Information, please insert the activation code same with listed in the your MCNprobox
http://i48.tinypic.com/ad154.jpg

4.In select Installation Folder just click Next To instal in this Folder
http://i48.tinypic.com/15jal1.jpg

5.Click Instal for begin installation
http://i49.tinypic.com/zmmdle.jpg

6.Please waiting process and then click Finish for the end of installation
http://i46.tinypic.com/2dwey3l.jpg

Next..............

II.Connect the McnPro Box with Computer

1.First, plug in the cable adapter included in the package to McnPro Box
http://i48.tinypic.com/2yloffn.jpg

2.Then plug the USB cable to McnPro Box
http://i47.tinypic.com/mabitk.jpg

3.Also then press the red button to the box to turn on mode
http://i46.tinypic.com/6swb6d.jpg

4.search drivers in address location C: \ Program Files \ Mcnbox team \ Mcnpro box \ Drivers \ Box drivers and then click OK
http://i50.tinypic.com/35cjyth.jpg

5.Just Wait for Instalation driver untill finish
http://i50.tinypic.com/6sang2.jpg

Next..............

III.How to Flashing via McnPro Box

1.Plug the cable Flash to the Service Cable into McnProBox
http://i50.tinypic.com/2i8ar89.jpg

2.Please insert cable Flash into the phone and the box
http://i50.tinypic.com/30rtcu8.jpg

3.Connect the cable power into the phone as the correctly one
http://i49.tinypic.com/64nknb.jpg

4.Double-click icon Mcnpro Box to start run the program
http://i50.tinypic.com/2mpn6dw.jpg

5.Click connect to see the connection box and computer
http://i46.tinypic.com/21en6kx.jpg

6.When see some a notification message box connected, that box
and computer already connected well
http://i48.tinypic.com/2cxep9g.jpg

7.Select RX option, TX scan to see the pins and type CPU
http://i48.tinypic.com/34qmf5v.jpg

8.In menu Select Chip, select ALL and then click Start to automatically detected type of CPU used by the mobile phone.
http://i48.tinypic.com/wakbw7.jpg

9. Scan messages result shows CPU Chipset MTK MT6225 ...
indicates the phone CPU type is MTK.
http://i46.tinypic.com/63xizr.jpg

Next.....................

10.If the pin flash cable being used is detected as well, Then the cable type selected Flash is correct, just klik Apply to continue
http://i49.tinypic.com/b5it90.jpg

11.Click Open to choose the firmware
http://i49.tinypic.com/otjcyh.jpg

12.Get the firmware as the correctly one's
http://i47.tinypic.com/z1rpt.jpg

13.click flash to start run the flashing process
http://i47.tinypic.com/8yu7us.jpg

14.Please try to shocked on the phone
http://i45.tinypic.com/2ciipw.jpg

15.Just waiting process flashing untill finish
http://i47.tinypic.com/r1lkpj.jpg

16.Till there's some a notification message appear Write OK!
http://i50.tinypic.com/2r406ed.jpg

17.Just Click unlock for finishing
http://i50.tinypic.com/11tbdcx.jpg

Hopely this usefull for new user McnPro Box...
Just wanna share

Br,

thanks bos good share