mx box not connect

sir when i click connect,its message me:Using device: HTI Flasher Interface (WinUSB)
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Reinitializing HTI ...OK.
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Reinitializing HTI ...OK.
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Reinitializing HTI ...OK.
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Reinitializing HTI ...OK.
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Failed to get HTIBOX IDs, please reconnect BOX and retry!
Error opening !
Last error: The handle is invalid (code: 6)
HTI Flasher Interface (WinUSB) disconnected.

Quote:

---

Originally Posted by diwale pk

sir when i click connect,its message me:Using device: HTI Flasher Interface (WinUSB)
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Reinitializing HTI ...OK.
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Reinitializing HTI ...OK.
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Reinitializing HTI ...OK.
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Reinitializing HTI ...OK.
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Failed to get HTIBOX IDs, please reconnect BOX and retry!
Error opening !
Last error: The handle is invalid (code: 6)
HTI Flasher Interface (WinUSB) disconnected.

---

First connect your box properly & don't use usb hub.
Then try to
Write driver manually.
C:\mobileEx\3.5\data\drivers\hti

not work bro.... any other solution

Quote:

---

Originally Posted by mobilecare_786

not work bro.... any other solution

---

what's your problem.......

post with details and screenshot and log in open a new thread........