-
Samsung A847R Successfully Unlock Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
-----------------------------------------------------------------------------------
To connect SGH-A847R phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Type *#782872#.
3. Press confirm button.
4. Type *#7465625# and leave appeared message on phone screen.
5. Connect USB cable and select Diagnostics COM port.
6. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM58
Selected model: SGH-A847R
Detected phone model: SGH-A847R
Mode: Normal
SW Version: UXJK4
HW Version: REV0.1
Phone IMEI: 355832-04-006740-4
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM20
Selected model: SGH-A847R
Mode: Normal
Phone model: SGH-A847
Firmware compiled date: Aug 12 2010
Firmware compiled time: 07:00:00
Firmware released date: Nov 17 2010
Firmware released time: 02:13:50
Phone IMEI: 355832-04-006740-4
Bluetooth MAC: E2:FB:48:37:5A:3C
SW Version: SBAM6290A-KPVMZL-2.6.014023_1S
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM20
Selected model: SGH-A847
Mode: Normal
Phone model: SGH-A847
Firmware compiled date: Aug 12 2010
Firmware compiled time: 07:00:00
Firmware released date: Nov 17 2010
Firmware released time: 02:13:50
Phone IMEI: 355832-04-006740-4
Bluetooth MAC: E2:FB:48:37:5A:3C
SW Version: SBAM6290A-KPVMZL-2.6.014023_1S
Reading phone unlock codes. It can take some time, please wait...
FREEZE unlock code: 05906139
NCK unlock code: 71648203
NSCK unlock code: 00000000
SPCK unlock code: 00000000
CPCK unlock code: 00000000
Work time: 0:01:14
-
Successfully Repaired I757m Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
-----------------------------------------------------------------------------------
To connect SGH-I757M phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: I757MUGLH2_OYCLH2
_BMC_Canada_Bell_Android_4.0.4.oct
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SGH-I757M
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM74
Phone connection failed
No diagnostic ports found!
Connecting to phone on COM18
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM74
Selected model: SGH-I757M
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM74
Mode: Emergency
Please switch your phone to the download mode and connect it to a
PC.
To put SGH-I757M phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Firmware writing successfully completed.
-
Successfully Repair IMEI and S/N Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
-----------------------------------------------------------------------------------
To connect GT-I9300 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Reboot phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM18
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM17
Selected model: GT-I9300
Port is busy
Searching for a phone. Please wait...
Phone found.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM17
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM17
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
Old IMEI: Unknown
New IMEI: 351869-05-000009-3
Erasing old IMEI. It can take some time. Please wait...
Creating NVM backup
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\NVDATA-GT-I9300-12-08-2013_22-56-33-.nvm file
Old IMEI was erased successfully.
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#9090# number.
4. Set speed to 115200.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Phone connected successfully
Deactivating MSL...
MSL deactivate successfully
Writing new phone IMEI...
New IMEI successfully written.
Please, restart the phone to apply changes
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM18
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
Repairing Serial Number. It can take some time. Please wait...
Phone will restart now
SN repaired successfully.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: R31C50JBCGK
Android version: 4.0.4 (IMM76D)
-
Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
Selected firmware file: C3303KDX.oct
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-C3303K
Selected port: USB
Please, press "volume up" and "lock" connect phone to USB without
battery.
Connecting...
Phone found.
Chipset version : 0A
SCROM version : 33
Sending loaders...
Preloader send successfully
Conecting to pipes...
Successfully conecte to pipes.
Writing firmware...
Writing Firmware
Writing partition LCDACT ...
Erasing block...
Block erase successfully.
Writing block...
Partition LCDACT write successfully.
Writing partition MAIN ...
Erasing block...
Block erase successfully.
Writing block...
Partition MAIN write successfully.
Writing partition DSP ...
Erasing block...
Block erase successfully.
Writing block...
Partition DSP write successfully.
Writing partition ROOT ...
Erasing block...
Block erase successfully.
Writing block...
Partition ROOT write successfully.
Writing partition BOOT ...
Erasing block...
Block erase successfully.
Writing block...
Partition BOOT write successfully.
Writing partition TFS ...
Partition TFS write successfully.
Writing partition CSC ...
Partition CSC write successfully.
Firmware Write successfully.
-
Welcome to Octoplus/Octopus Box Samsung software version 1.3.2
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E2220
Selected port: COM18
Baud rate: 115200
Plase, connect phone to UART cable, insert battery and press shortly
power button
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35821404382823
SW Version: E2220WBLC
Bluetooth MAC: 28987B702073
Phone SN : RV1C44HMV2
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E2220
Selected port: COM18
Baud rate: 115200
Plase, connect phone to UART cable, insert battery and press shortly
power button
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35821404382823
SW Version: E2220WBLC
Bluetooth MAC: 28987B702073
Phone SN : RV1C44HMV2
Reading codes...
FREZEE : 15604500
NET LOCK : 53769050
Subset LOCK : 000000000
SP LOCK : 000000000
CP LOCK : 000000000
SIM LOCK : 4184867194
Activa LOCK : 000000000
Phone LOCK : 4195067296
Reading codes successfully completed.
-
Log file "C:\Program Files\Octoplus\Octoplus_Samsung\LOG\10-09-2013_15-00-08.log" created (9/10/2013 3:00:12 PM).
INFO : 9/10/2013 3:00:12 PM > Set up system language English (file: English.ini)
INFO : 9/10/2013 3:00:12 PM > Welcome to Octoplus/Octopus Box Samsung software version 1.3.2
INFO : 9/10/2013 3:03:01 PM > Selected firmware file: GT-I9020_for_Repair_IMEI.oct
WARN : 9/10/2013 3:03:04 PM > Please switch your phone to the download mode and connect it to a PC.
WARN : 9/10/2013 3:03:04 PM > To put GT-I9020 phone into download mode you have to perform the following steps:
WARN : 9/10/2013 3:03:04 PM > 1. Reconnect phone battery.
WARN : 9/10/2013 3:03:04 PM > 2. Press and hold "Volume + " + "Volume -" buttons.
WARN : 9/10/2013 3:03:04 PM > 3. Insert usb cable.
INFO : 9/10/2013 3:03:11 PM > Found phone on
INFO : 9/10/2013 3:03:11 PM > Firmware write started.
INFO : 9/10/2013 3:03:11 PM > Writing IPBL section...
INFO : 9/10/2013 3:03:14 PM > IPBL section has been written successfully.
INFO : 9/10/2013 3:03:14 PM > Writing BOOT section...
INFO : 9/10/2013 3:03:16 PM > BOOT section has been written successfully.
INFO : 9/10/2013 3:03:16 PM > Writing SYSTEM section...
INFO : 9/10/2013 3:04:15 PM > SYSTEM section has been written successfully.
INFO : 9/10/2013 3:04:15 PM > Writing RECOVERY section...
INFO : 9/10/2013 3:04:18 PM > RECOVERY section has been written successfully.
INFO : 9/10/2013 3:04:18 PM > Writing USERDATA section...
INFO : 9/10/2013 3:04:25 PM > USERDATA section has been written successfully.
INFO : 9/10/2013 3:04:25 PM > Writing RADIO section...
INFO : 9/10/2013 3:04:30 PM > RADIO section has been written successfully.
INFO : 9/10/2013 3:04:30 PM > Firmware writing successfully completed.
INFO : 9/10/2013 3:05:20 PM > -----------------------------------------------------------------------------------
INFO : 9/10/2013 3:05:20 PM > To connect GT-I9023 phone you have to perform the following steps:
INFO : 9/10/2013 3:05:20 PM > 1. Disconnect USB cable from phone.
INFO : 9/10/2013 3:05:20 PM > 2. Go to Menu->Settings->Applications->Development.
INFO : 9/10/2013 3:05:20 PM > 3. Turn on "USB Debugging" option.
INFO : 9/10/2013 3:05:20 PM > 4. When the message appears press "Yes".
INFO : 9/10/2013 3:05:20 PM > 5. Connect USB cable to the phone.
INFO : 9/10/2013 3:05:20 PM > 6. Press "Read Info" in software.
INFO : 9/10/2013 3:05:26 PM > Selected firmware file: I9023 XEN I9023XXKD1.oct
WARN : 9/10/2013 3:06:02 PM > Please switch your phone to the download mode and connect it to a PC.
WARN : 9/10/2013 3:06:02 PM > To put GT-I9023 phone into download mode you have to perform the following steps:
WARN : 9/10/2013 3:06:02 PM > 1. Reconnect phone battery.
WARN : 9/10/2013 3:06:02 PM > 2. Press and hold "Volume + " + "Volume -" buttons.
WARN : 9/10/2013 3:06:02 PM > 3. Insert usb cable.
INFO : 9/10/2013 3:06:02 PM > Found phone on
INFO : 9/10/2013 3:06:02 PM > Firmware write started.
INFO : 9/10/2013 3:06:02 PM > Writing IPBL section...
INFO : 9/10/2013 3:06:04 PM > IPBL section has been written successfully.
INFO : 9/10/2013 3:06:04 PM > Writing BOOT section...
INFO : 9/10/2013 3:06:07 PM > BOOT section has been written successfully.
INFO : 9/10/2013 3:06:07 PM > Writing RECOVERY section...
INFO : 9/10/2013 3:06:09 PM > RECOVERY section has been written successfully.
INFO : 9/10/2013 3:06:09 PM > Writing SYSTEM section...
INFO : 9/10/2013 3:07:13 PM > SYSTEM section has been written successfully.
INFO : 9/10/2013 3:07:13 PM > Writing USERDATA section...
INFO : 9/10/2013 3:07:19 PM > USERDATA section has been written successfully.
INFO : 9/10/2013 3:07:19 PM > Firmware writing successfully completed.
Log file "C:\Program Files\Octoplus\Octoplus_Samsung\LOG\10-09-2013_15-00-08.log" closed (9/10/2013 3:18:34 PM).
-
Welcome to Octoplus/Octopus Box Samsung software version 1.3.3
-----------------------------------------------------------------------------------
To connect SGH-T599 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "Modem" value.
7. Set "USB" radio button to "PDA" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM15
Selected model: SGH-T599
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Thu Feb 14 18:28:12 KST 2013
Phone SN: R21D54JWWDN
Android version: 4.1.2 (JZO54K)
Unlocking phone...
Reading data from phone...
Data read successfully.
Please conect phone to BOX via UART cable.
Searching for a phone. Please wait...
Phone found.
Unlocking phone. It can take some time. Please wait...
Please insert card into phone, if phone is locked, then type 00000000
Phone is successfully unlocked
-
Only with Octopus Box Samsung T599 Welcome to Octoplus/Octopus Box Samsung software version 1.3.3
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SGH-T599
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Fri Apr 12 02:23:38 KST 2013
Phone SN: R21D65WWPJJ
Android version: 4.1.2 (JZO54K)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SGH-T599
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Fri Apr 12 02:23:38 KST 2013
Phone SN: R21D65WWPJJ
Android version: 4.1.2 (JZO54K)
Unlocking phone...
Reading data from phone...
Data read successfully.
Please conect phone to BOX via UART cable.
Searching for a phone. Please wait...
Phone found.
Unlocking phone. It can take some time. Please wait...
Please insert card into phone, if phone is locked, then type 00000000
Phone is successfully unlocked
-
C 3312 successfully unlocked
Welcome to Octoplus/Octopus Box Samsung software version 1.3.4
Selected firmware file: C3312XXLA5_OXELA3.oct
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM67
Baud rate: 115200
Phone must be OFF, and battary must be fully charged
Please, connect the UART cable, Reconnect the battery, press Power
button
Connecting...
Port is busy
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: USB
Phone must be OFF, and battary must be fully charged
Please, connect USB cable and reconnect battery.
Connecting...
Phone found.
Sending loaders...
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Writing firmware...
Erasing Full Flash...
Full Flash erase successfully.
Writing "C3312XXLA5_psi"...
Writing "C3312XXLA5_psi" done!
Writing "C3312XXLA5_slb"...
Writing "C3312XXLA5_slb" done!
Writing "C3312XXLA5_BSY part 0"...
Writing "C3312XXLA5_BSY" done!
Writing "C3312XXLA5_BSY part 1"...
Writing "C3312XXLA5_BSY" done!
Writing "C3312XXLA5_CDS"...
Writing "C3312XXLA5_CDS" done!
Writing "C3312OXELA3_CSC"...
Writing "C3312OXELA3_CSC" done!
Firmware Write successfully.
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM67
Phone must be ON.
Searching for a phone. Please wait...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM68
Phone must be ON.
Searching for a phone. Please wait...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM67
Phone must be ON.
Searching for a phone. Please wait...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM21
Phone must be ON.
Searching for a phone. Please wait...
Found phone on COM21
Reading info...
UniqueNumber : 27370001361710
SW Version : C3312XXLA5
Phone IMEI A:
Phone IMEI B: -----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM21
Phone must be ON.
Searching for a phone. Please wait...
Found phone on COM21
Reading info...
UniqueNumber : 27370001361710
SW Version : C3312XXLA5
Phone IMEI A:
Phone IMEI B:
Deactivating MSL...
MSL deactivate successfully
Unlocking phone...
Phone is successfully unlocked
Please insert card into phone, if phone is locked, then type #0111*
00000000#
-
I9192 Unlocked! Platform: Samsung Android
Selected port: COM149
Selected model: GT-I9192
Port is busy
Mode: Emergency
Unlock for GT-I9192 phone in emergency mode can’t be done
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM149
Selected model: GT-I9192
Mode: Normal
Phone model: GT-I9192
Firmware compiled date: Jun 11 2013
Firmware compiled time: 20:00:00
Firmware released date: Aug 19 2013
Firmware released time: 22:14:14
Phone IMEI: 357963-05-452006-7
SW Version: M8930B-AAAATAZM-4.5.211107
Unlocking phone...
Creating NVM backup
Reading NVM done!
Firmware compiled date: Mon Aug 19 21:05:51 KST 2013
Phone SN: R21D8CVZNVA
Android version: 4.2.2 (JDQ39)
Cheking Root
Deactivating MSL...
MSL deactivate successfully
Phone will restart now. Please don't disconnect cable!
Firmware compiled date: Jun 11 2013
Firmware compiled time: 20:00:00
Firmware released date: Aug 19 2013
Firmware released time: 22:14:14
Incorrect IMEI
SW Version: M8930B-AAAATAZM-4.5.211107
Found phone on COM149
Repairing NVM for GT-I9192 phone...
Phone is successfully unlocked
Please, restart the phone to apply changes
-
E1205T read codes Platform: Samsung Swift
Selected model: GT-E1205T
Selected port: COM117
Baud rate: 921600
Please, connect phone to UART cable, insert battery and press power
button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Searching patch area, please wait...
Writing patch...
Patch successfully write.
Rebooting phone
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35587705159430
SW Version: E1205TJVL
Phone SN : R21D20NZW6
Reading codes...
Freeze lock: 37391320
Net lock: 00000000
Sim lock: 00000000
Phone lock: 00000000
Sp lock: 00000000
-
E1050 read codes successfully Platform: Samsung Swift
Selected model: GT-E1050
Selected port: COM117
Baud rate: 921600
Please, connect phone to UART cable, insert battery and press power
button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Searching patch area, please wait...
Writing patch...
Patch successfully write.
Rebooting phone
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35665005868239
SW Version: E1050XXKA
Phone SN : R21D73S8W6
Reading codes...
Freeze lock: 65103570
Net lock: 00000000
Sim lock: 00000000
Phone lock: 00000000
Sp lock: 00000000
-
http://images04.olx.in/ui/2/07/71/13...ccessories.jpg
Welcome to Octoplus/Octopus Box Samsung software version 1.3.3
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-S3770
Selected port: COM10
Baud rate: 921600
Plase, connect phone to UART cable, insert battery and press shortly
power button
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35814704101797
SW Version: S3770XXKK
Reading codes...
FREZEE : 22171500
NET LOCK : 59359190
Subset LOCK : 00000000
SP LOCK : 00000000
CP LOCK : 00000000
SIM LOCK : 00000000
Activa LOCK : 00000000
Phone LOCK : 00000000
Reading codes successfully completed.
-
Note 3 n9005 imei repair done -----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM538
Selected model: SM-N9005
Mode: Normal
Phone model: SM-N9005
Firmware compiled date: Aug 23 2013
Firmware compiled time: 04:00:00
Firmware released date: Sep 8 2013
Firmware released time: 14:46:39
SW version: M8974A-AAAANAZM-1.0.180057
Old IMEI: 004400-15-202000-0
New IMEI: 357507-05-
Creating NVM backup
Reading NVM done!
Connecting to ADB, please waite...
Firmware compiled date: Wed Sep 11 15:30:59 KST 2013
PDA version: N9005XXUBMI7
CSC version: N9005OJVBMI2
SW version: N9005XXUBMI6
Phone IMEI: Unknown
Phone SN: RV1D956TFKR
Android version: 4.3 (JSS15J)
Cheking Root
Erasing old IMEI. It can take some time. Please wait...
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-N9005-27-04-2014_12-59-13-.asec file
Phone will restart now. Please don't disconnect cable!
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Wait for 1-2 minutes.
3. Connect phone via UART cable to the Box.
Serching phone...
Phone found.
Writing new IMEI. Please wait...
Please connect phone to USB cable and press OK button.
Serching phone...
Firmware compiled date: Aug 23 2013
Firmware compiled time: 04:00:00
Firmware released date: Sep 8 2013
Firmware released time: 14:46:39
SW version: M8974A-AAAANAZM-1.0.180057
Found phone on COM538
Repairing NVM for SM-N9005 phone...
Repairing 3G/4G...
3G/4G repair successfully
IMEI successfully repaired.
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
-