Repair Dead Samsung I9500 Galaxy S4 Via Boot Recovery full tutorial here

Repair Dead Samsung I9500 Galaxy S4 Via Boot Recovery

http://cdn2.gsmarena.com/vv/pics/sam...s4-i9500-1.jpg

http://forum.xda-developers.com/images/attach/zip.gifI9500_pit file.zip

Odin v3.07 zip

Download The Complete Guide vit bootloader from Here


Official 4file firmware with Bootloader Download I9500XXUBMF8 4.2.2

Another seperate files

GT-9500_NOV.pit (3 KB)

BOOTLOADER_I9500XXUBMF8.rar (478 KB)

PDA_I9500XXUBMF8.rar (1.29 GB)

PHONE_I9500XXUBMF8.rar (4.8 MB)

CSC English
CSC_I9500SERBMF8.rar (144.3 MB)

CSC Arabic
CSC_OJV_I9500OJVBMGA_1123221_REV00_user_low_ship.r ar (128.2 MB)

Quote:

---

Follow this method this also work : here

---

For More Multi File Firmware Vist Here

S4 dead brick please help

Quote:

---

Originally Posted by avinal

S4 dead brick please help

---

1st method here Download it nd try the method N9500 DEAD BOOT REPAIR FREE METHOD

2nd method Buy S-Boot Repair Clip

Use this S-Boot Repair Clip to repair the boot on Samsung i9500, i9300, i9308, i939d, m440s, i317, T889, E210k, E210L, E210s, N7100, N7108, N719, N7102 very easily without soldering.

No disassembly is required except for a couple of models whereby you just need to remove the screen before doing the work.

No test point soldering is required.

Supported Models:
You can use this clip to repair the boot on the following phone models:

i9500 Boot Repair Clip
i9300 Boot Repair Clip
i9308 Boot Repair Clip
i939d Boot Repair Clip
m440s Boot Repair Clip
i317 Boot Repair Clip
T889 Boot Repair Clip
E210k Boot Repair Clip
E210L Boot Repair Clip
E210s Boot Repair Clip
N7100 Boot Repair Clip
N7108 Boot Repair Clip
N719 Boot Repair Clip
N7102 Boot Repair Clip

http://www.youtube.com/watch?feature...&v=9OvUH6f4yOY

Samsung i9500 dead boot repair tutorial with GPG S-Boot Clip:

http://www.multi-com.pl/multicom/pim...otClip_400.jpg

Remove the screen from the i9500 (if not removed, it will burn after repair)
Connect regulated power supply to i9500 pcb battery terminals
Insert SD card connector from S-Boot cable into i9500
Insert i9000 download clip
Now wait, do not cut off power supply in the middle otherwise it may not be repaired at all.
If the flash is not completely broken, it will be repaired after 5minutes, and will enter download mode.
Plug the i9000 download clip and run flashing platform.
See if it recognizes the driver and port, if it does, then you can load file and flash, but remember to leave screen off until phone flashing is completed, or the screen will burn.
After flashing phone is in good state, just like you have changed the flash ic
If phone hangs after enter mode however, it means flash ic is totally damaged or other hardware problems and cannot be fixed.

i have a s4 9505 dead boot wht i can do

Quote:

---

Originally Posted by enigma

i have a s4 9505 dead boot wht i can do

---

Repair Dead Samsung Galaxy S4 I9505 via USB Cable

you can use this software to repair Your dead Samsung i9505 and similar (m919, i337, L720 etc)
Note, You need to install QHUSB Qualcomm drivers first.
After flashing with this software, You need to flash phone with official firmware and PIT file, otherwise phone will be dead again, and You’ll need to repeat the process.

If You get errors reported by this software (command prompt window), You’ll have to replace the eMMC chip first.

DOWNLOAD

link not working sir please upload another

Quote:

---

Originally Posted by safraz

link not working sir please upload another

---

Which Link Not Working..???

https://t.me/pump_upp - best crypto pumps on telegram
Make 1000% and more within 1 day, join channel @pump_upp !