Setool, maybe one of sony ericsson mobile repair tool that introduce after cruiser and ufs.
As we know, many repair tool box recently became “dead project”, but setool almost never disapointed his users.
User never “push” to buy new box or dongle to upgrade software, except only buy log activation to upgrade software.
As a newbie like me, especialy who bouhgt setool before or after 2011, sometimes face litle problem on how to install, activation and update setool.
To install any software, we usualy need installer files eg.: setup.exe, install.exe or *.msi.
Setool software, from the first time never use installer file, but it compressed into a “rar” file. User only ecstract that file into special folder on pc/ laptop, and software ready to use, by double klick “Setool2g.exe” file.
To help new user to prepare setool software, I have sufficient time to make a note every step while install process at first time.
I hope it useful.
INSTALL SETOOL.
There are two thing that we notice, is to prepare setool software on your pc/ laptop, and to install setool driver box.
Steps:
1. make a folder on pc/ laptop, and rename it any name.
2. download and copy-paste setool *.rar file into that folder.
3. extract *.rar file into that folder (I suggest named it ccording its version – eg: setool v1.107).
4. if you install old version/ previous version once – eg: setool v1.106, copy-paste every file/folder (especially backup dan logs) from previous version into recent version (v1.107).
5. setool box driver:
- install: DPInst.exe (or ggsetup-x.x.x.x.exe ) from sub folder: USBFlash_driver.
- install: Axalto-egate-drivers (use accordings pc os – win95, winxp, winvista, win7) from : SmartCard_Drivers\ eGate_Driver.
6. restart pc.
7. connect setool box to pc.
If appear pop-up “found new hardware”, manually direct to: e-Gate_Drivers
If still appear same pop-up than direct it to: 1.09.06 (folder: 4in1_CableDriver).
8. make sure installed usb-serial driver at device manager, if any driver not installed properly yet at “universal serial bus controller” on “usb<->serial”).
If it happen, right klick, update driver and direct to sub folder: 4in1_CableDriver > 1.00.2176 (or 1.09.06 and 2.02.06).
9. check “device manager” > every driver must install properly, at:
- e-gate smart card
- usb serial port (COMxx)
- e-gate virtual reader enumerators (winxp)
- usb serial converter (winxp)
10. Setool software ready to use by double klick “Setool2g.exe” file.
Or right klick “Setool2g.exe” and “send to” desktop (creat shortcut), so setool can easily use at desktop.
11. Finish.
Bookmarks