please re download v1.1106 from support area or from https://rapidshare.com/#!download|85...33630F1E72DEC4 due to hurry, 8x55 unlock was broken.
sorry for inconveniences.
please re download v1.1106 from support area or from https://rapidshare.com/#!download|85...33630F1E72DEC4 due to hurry, 8x55 unlock was broken.
sorry for inconveniences.
Last edited by TarikuL; 23-08-2011 at 12:23 PM. Reason: Link modify
Code:- again improved recovery for 8x55-based phones. recovery of phones with totally damaged both semcboot and trim area properly supported now.
download
-from now on, unlock by altbypass method for qsd8250,msm7227 phones will also "unlock" semcboot.
- qsd8250,msm7227 phones with "unlocked" bootloader can flash custom firmwares now
- added few models to model list, so users don't get confused
- different bugfixes, some are important.
For more info check here
SETOOL v1.1108
v1.12
- added altbypass support for xperia arc_s model, in other words, phones with 8255T chipset fully supported.
- added resurrection support for s1 qualcomm-based phones with totally damaged security zone.
resurrection procedure will be described in FAQ later,
however, in short it is standard "recovery+write gdfs+unlocking" chain.
7227,8250-based phones require special uart cables ( pinout included in docs ),
however it is highly recommended to use special GPG cables
8x55-based phones does not require any special cables.
as side effect, imei change possible now for s1 qualcomm-based phones.
for 7227,8250-based phones need select COM as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking, use testpoint (gnd type) )
for 8x50-based phones need select USB as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking )
cost of imei change 5 credits, please take in mind, that if you change imei, phone need to be unlocked,
so add another 5 credits for unlock procedure.
if you have calculated signature for some imei, then you can save 5 credits for unlocking
- added few models to model list, so users don't get confused
- different bugfixes
RapidShare Link
- resurrection procedure will now work for totally erased s1 qualcomm-based phones FAQ now have resurrection procedure example. - forgot to post, that starting from v1.12 setool2 will check for faulty cypress-based reader and refuse to run, if setool2 smartcard installed in such reader. There is no any workaround. Use om****y-based reader or other normal reader.
SEtool V1.1201
v1.1202
Code:- no testpoint altbypass unlock procedure will work now for msm7227-based phones,which using MCUs with fixed security bug. resurrection cables will NOT work for MCUs with fixed security bug. Because of this, phones, which are already dead should be recovered using jtag box, which can write ORIGINAL semc boot. big thanks for help and testing to electrolandgsm. - switch to usb interface was broken for DB200x phones, fixed. - added few models to list, so users can use profiles for them.
RapidShare Link
[QUOTE=shaiksha85;214693]v1.1202
Code:- no testpoint altbypass unlock procedure will work now for msm7227-based phones,which using MCUs with fixed security bug. resurrection cables will NOT work for MCUs with fixed security bug. Because of this, phones, which are already dead should be recovered using jtag box, which can write ORIGINAL semc boot. big thanks for help and testing to electrolandgsm. - switch to usb interface was broken for DB200x phones, fixed. - added few models to list, so users can use profiles for them.
Alternative download link v1.1202;
http://www.fileserve.com/file/bRc7hnx/v1.1202.rar
Regards.
v1.1203
-testpoint altbypass method will work now for msm7227-based phones,which using MCUs with fixed security bug.
that means, resurrection cables will work for MCUs with fixed security bug.
- fixed problem with FOTA upgrade for msm8x55-based phones, unlocked by altbypass
Download
https://rapidshare.com/files/3023120365/v1.1203.rar
Starting from 25.12.2011 cost of unlock procedure, using alternative security bypass for semc phones,
based on msm7227,qsd8250,qsd8x55 chipsets will be 0 ( zero ) credits.
Such terms will be in effect until another announcement.
SETool news: Starting from 03.01.2012 cost of unlock procedure, using alternative security bypass for semc phones,
based on msm7227,qsd8250,qsd8x55 chipsets will be 2 ( two ) credits.
We will watch closely on market situation with semc qualcomm solution and react correspondingly.
SEtool v1.1204
- fixed "dead phone after unlock" for some latest j20 phones.
- x10 with android firmware 2.3.3 supported for altbypass unlock
- msm8x60 sony phones supported ( lt26,lt28,is12s,so-03d ). Standard operations supported - flash,trim area read/write.
Network unlock only supported using s1 signature server, which is offline for us.
- added support for one interesting activation.
RapidShare Link
SETOOL
by SEtool team
Version 1.1286 released!
Added world's first direct support for all versions j108!
DOWNLOAD SETOOL from RAPIDSHARE
New in SEtool 1.1286:
- added quite complex, but working procedure to unlock last SEMC A2 phone, j108 cedar from network locks.
beginners, stay away from this procedure.
other users, welcome to faq for details.
- STE U8500 sony phones supported ( lt22,mt26,st25 ). Standard operations supported - flash,trim area read/write.
Network unlock only supported using s1 signature server, which is offline for us.
STE U8500 support was done blindly, should work, but need to be tested.
SETool Official Support Forum
SETool Official Website
setool v1.1289 Released
v1.1289
- fixed android-based unlock, daemon not started on some systems
- fixed credits loss issue, when user unlocking s1_open phone and s1 server became busy in the middle of process
RAPIDSHARE
Don't spam forum, just HIT button
v1.1290
- added support for msm8960-based semc phones ( network unlock only supported via s1 server )
DOWNLOAD HERE
Don't spam forum, just HIT button
Dear all master
here is time to update your setool box
Last edited by PALMOBILE@SAMSUNG; 20-11-2012 at 04:11 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks