!!Smart-Clip update and check here!!
SmartMoto v1.19 & Smart-Clip v2.24 Dear users,
We are pleased to announce the release of new version of SmartMoto v1.19 and Smart-Clip v2.24
With this release we add M1000 to supported models list.
Unlock procedure for M1000
Models with boot versions up to 0.6.1.2 could be unlocked simply by pressing "Unlock" button on Smart-Clip. (standard unlock procedure for P2K models)
Boot version 0.6.1.2 needs to be unlocked via Remove RSA option.
Power the phone ON;
Connect the phone to a powered clip;
Launch SmartMoto;
Press Search button in SmartMoto;
Program should detect the handset;
Go to Unlock tab;
Press Remove RSA;
Phone enters boot mode, message "Waiting" appears on the bottom of the screen;
Press 1 and 2 keys simultaneously in upper part of the handset and SmartMoto will continue the process;
Program will show a popup window with description of procedure to follow:
Remove phone battery
Ensure that USB cable is plugged to the phone
Press phone keys 1 and 2 simultaneously
While holding Button 1 and Button 2, insert battery
Release button 1 and 2
Message "Waiting" should appear on the bottom of phoneТs display
Press and release phone keys 1 and 2 simultaneously once more
Message "Waiting" should disappear, press 'OK' to continue
SmartMoto finishes removing RSA, the handset turns ON;
Now phone requires being unlocked with Unlock button of Smart-Clip;
Connect the phone to the powered clip
Press UNLOCK button on the clip
Phone reloads. Within 5-10 seconds message "Waiting" appears on the bottom of the phoneТs display
Press 1 and 2 keys simultaneously in upper part of the handset. Message "Waiting" disappears, phone enters boot mode (if you don't press these 2 keys during message "Waiting" is displayed, the clip will give red E/G led and you will have to start with step 1 again)
After 1 and 2 keys have been pressed E/G green led will blink and phone reboots. Meanwhile E/G will give frequent green blinking and phone will turn on.
Do not disconnect cell phone from Smart-Clip while green led indicator blinks!
Green E/G led glows.
The cell phone is unlocked.
Models with higher boot version will require Testpoint procedure to be unlocked.
Please be aware that TP procedure for M1000 and data cable differs from other P2K models.
Testpoint unlock procedure for M1000
Disassemble the phone;
Connect USB-data cable;
Connect Testpoint A to Testpoint B;
Press Button 1 and Button 2 simultaneously;
While holding Button 1 and Button 2 insert battery;
Release Button 1 and Button 2 for 1 second;
Press and release again Button 1 and Button 2 simultaneously;
Press Search button in SmartMoto;
SmartMoto should detect УS Blank Paragon POGФ or УS Blank Rainbow POGФ;
Disconnect Testpoint;
Go to Unlock tab of SmartMoto.
Select required model from the list;
Press Unlock via Testpoint;
Assemble the handset, itТs ready for use.
M1000 data cable pinout
Boot-Loader/Smart-Clip/SmartMoto update
Dear users,
We are pleased to announce the launch of totally renewed portal www.boot-loader.com. The portal has been moved to another platform in order to improve the service and taking into consideration helpful suggestions submitted by Smart-Clip users. New platform development was based on improvement of the following site features:
Security
Stability
Site performance speed
User friendliness
Fast support and customer feedback
We hope that our efforts will substantially contribute to effectiveness of our service and quality of support provided to Smart-Clip users.
From now on SMARTMOTO section is accessible for free during one year after the first update of your Smart-Clip at www.smart-clip.com. When one year period has expired, Smart-Clip users can purchase another year of access to SMARTMOTO section. Price plans and their detailed descriptions are located at COMMERCIAL section of www.boot-loader.com.
Note:
After the first Smart-Clip update and account registration at www.boot-loader.com a new user activates the service within standard price plan. Access is provided within one year period since the first Smart-Clip update (date of the first update + 1 year). In case if Smart-Clip has not been updated before logging to www.Boot-Loader.com, the access will not be valid and user will be asked to perform an update procedure.
New *smf flash files were added to the database of www.boot-loader.com. Please check out a NEWS section for detailed info.
Please remember.
Changes to the order of work with SMARTMOTO section are not affecting Smart-Clip hardware warranty issues. Period of Smart-Clip hardware warranty is 180 days. Expired Smart-Clip warranty does not limit the access to SMARTMOTO section of www.boot-loader.com
Also
Released a new version of Smart-Clip firmware V2.25 and SmartMoto v1.20.
This update adds the following models V235 & L2 to the list of supported. They can be unlocked using Unlock via Testpoint option of SmartMoto.
Perform V235 testpoint procedure/L2 testpoint procedure
Use "Unlock via Testpoint" function of SmartMoto from "Unlock" tab
SmartMoto V1.20 has the following features added:
Manual selection of LPT port (select a manual mode in Smart-Clip section and enter port number);
Allowed flashing with backups from other handsets for the following models: C975, C980, V975, V980, E1000;
Detect of firmware version for model C975 to avoid downgrade or unlock of unsupported version. Program will alert user for possible phone malfunction
(last option requires to be tested).
Please remember:
During testpoint unlocking procedure phone's LCD must be disconnected.
Do not use hot air fan to remove a metal shield on PCB. This can seriously damage the handset.
Use any other alternative tool to cut or drill it. Please make sure you do not damage the board.
If you wish to receive news on updates immediately, please subscribe to our SMS notification system.
Smart-Clip ON!
Best Regards
GSMServer team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com
