...:: SmartMoto All Updates Post Here ::...

Dear users,

We present new version of Smart-Clip v5.03, S-Card v3.10 and SmartMoto v4.24

With this release we moved to the next level in servicing MTK-based models. Such new features and improvements have been added to this version:

Developed advanced flashing option for the following phones with NAND flash memory type:

Motorola: EX112 / EX115 / EX122 / EX128
Alcatel: OT-800 / OT-802 / OT-802Y / OT-803 / OT-803D / OT-806 / OT-806D / OT-807 / OT-807D / OT-808 / OT-808G / OT-808M / OT-809 / OT-810 / OT-813 / OT-813D / OT-818 / OT-818D / OT-819 / OT-819D / OT-828 / OT-880 / OT-888 / OT-888D / OT-I802 / OT-I880 / OT-I898 / OT-C819D

Same flash file can be flashed into NAND chips with different page sizes (either 512 or 2048 bytes per page), e.g. OT-802

Added restore backup from one phone with NAND flash memory type into another.

Thus, phone’s firmware will be upgraded

Implemented autodetection and bad blocks marking during the flashing process of the phones with NAND chip.

This new feature helps to fix bad blocks that newly occurred in the phone flash

Added complete handling of NAND bit errors.

Single bit errors are corrected transparently. In case of uncorrectable bit errors presence in phone or it’s backup file, SmartMoto will inform you about it. Also, SmartMoto prevents flashing the backup file with uncorrectable bit errors,

Released direct unlock and read codes options for Alcatel OT-355D.

This dual-sim MTK-model based on MT6223 is now added to the list of supported

Flash files for new MTK models will be uploaded to SmartMoto section (folder mfw) of Boot-Loader v2.0 portal

Smart-Clip ON!

Best Regards
GSMServer team

SmartMoto v4.25 World's first & exclusive solution for Motorola EX-series models.

Dear users,

We are glad to inform you that new version of SmartMoto v4.25 is released. With this update we provide the following benefits:

World's first and exclusive to Smart-Clip. Released Read Codes* option for the following Motorola EX-series models with MTK platform:

• EX112
• EX115
• EX122
• EX126
• EX128
• EX211
• EX212
• WX345

* Read all type of codes: NP, NSP, SP, CP, SIMP, NS-SP, SIM-C

Warning!
Due to some FW versions inconsistency the freshly unlocked phone can request the code again after being rebooted.

Users with WX345 that unlocked their phones via “direct unlock” option without saving backup and now have issues with network detect – please contact us for tests.

Added Read/Write flash and Format FFS options for the next two MTK-based models:

• EX211
• WX345

Warning!
Please remember that backup must be saved before performing Format FFS and writing flash to the other phone. Otherwise, the handset may have difficulties with network detect. This issue happens due to some firmware versions inconsistency. We will try to find a solution to it in near future.

Improved “write backup” procedure for the NAND flash memory phones with 512 page size to the phone with page size 2048.[*]Other words, from now, the backup file saved from the handset with page size 512 can be flashed to the phone with page size 2048.

Smart-Clip ON!

Dear users,

SmartMoto becomes to be multi-brand MTK solution and now we are working under adding support of bunch of new brands. Unlock of specified below models wasn’t fully tested yet, so please create backup copies before performing any operation to the phone.

Unlock (and other actions) of MTK models

Important: Save Backup before performing any action

1. Run “Read codes” procedure and if no error appears, you may go to step 2
2. Perform "Direct Unlock" operation

Feel free to post your feedbacks along with the log files of successfully unlocked phones in this topic.

Phone models list:

• Huawei: G5730, G5760, G6608, G6622, G7050, G7600, G5010, G5500, G3610, G6600 (MTS-635), G6300, G6620, G6608, G7010, G7210, G6603, G7206c, G20, G3500, G6700, G7007, G5630, G7010, G6610v, G6610, G7007, G6150, G3501
• Vodafone: V545, V547i
• ZTE: 231, 731, A136G, A139, A201, A205, A205+, A211, A215, A215+, A261FM, A292, A611+, A661, A861, F120, i628, i766, i799, N280, N281, N290, N295, R220, R221, R225, R230, R231, R236, R620, R630P, R791, S202, S212, G-S213, T202, X632, X670, X671, X730, X760, X761, X930, X960 (SFR-342), X990, X991
• Fly Q200, Q400

Tested in the topic models are marked bold

If you have MTK based phone model that is not listed here, you are welcome to test it but don’t forget to save backup before performing any operation.

NOTE: Send phone's backups along with the log files from unlock procedures to http://www.smart-clip.com/img/mail_2.gif. Backups created from the phones based on CPU MT6235 with NAND flash memory type are most necessary.
Also, please notice that backup copies suppose to be saved with the latest SmartMoto version (version 4.26 or higher).

Best Regards
GSMServer team


http://www.gsmserver.com/img/sc_userbar_1.png

SmartMoto v4.27! Added support for Motorola:EX118/EX119/EX223/WX292 and much more!

Dear users,

We are glad to inform you that new version of SmartMoto v4.27 is released.
It provides you with such new features:

1.Direct unlock; Read Unlock Codes; Read User Code; Backup/Restore flash, flex and calibrations; Format FFS operations, for the following models:

• Motorola*: EX118 / EX119 / EX223 / WX292 - First in the world!
• Avio: A1000
• Chat phone: SN50
• ZTE: 120F

* Pay attention! These phone models have problems with network detection after flash/format FFS operations. Due to this reason it is required to backup calibration settings before flash / format ffs operations and to restore them afterwards!

2.MTK platform phone models based on MCU MT6236 are now supported
3.Flash chip Toshiba TC58FYM7T8C [98009E:2] is now supported
4.Important changes made into MTK section of SmartMoto software.
Those improvements were required to add support of the new phone models.

All feedbacks and backups received from our users were deeply analyzed. Please use latest SmartMoto version for testing and backup reading from not tested in this thread MTK models.

Smart-Clip ON!

Dear users,

Please let us introduce a new version of SmartMoto v4.28.

In this release the following improvements and changes were made:
Fixed issues with cell phones based on NOR flash IC that were found in software versions since SmartMoto v4.26. We strongly recommend to update SmartMoto to this latest version.
Flash chip ST Model M58LR128FT is now supported
The terms of work with untested models are changed. Details are placed in this thread.
In case you have untested MTK phone from this thread and you need to unlock it, please contact us for a tests.

Smart-Clip ON!

Best Regards
GSMServer team

SmartMoto v4.29. Resolved issues with direct unlock.

Dear users,

Please let us introduce a new version of SmartMoto v4.29

With this release we have resolved issues with direct unlock operation for models with ”hardware lock”.

Smart-Clip rules have been updated. Please check them at our official forum.


Smart-Clip ON!

Best Regards
GSMServer team