Results 1 to 14 of 14

Thread: NEW Tornado Infra Pro Station - Bigger Heaters for faster and safer reworking!!!

  1. #1
    Product Supporter
    Join Date
    Apr 2010
    Posts
    6

    Default NEW Tornado Infra Pro Station - Bigger Heaters for faster and safer reworking!!!

    Tornado Infra Pro Rework Station - now with bigger preheaters for FASTER and SAFER reworking!



    ---Best for Big BGA IC's such as laptop motherboards, PC motherboards, xbox360, PS3 and many other gaming consoles ---


    SPECIFICATIONS:

    Preheater:
    Heating element surface : 122 x 122mm
    LxWxH : 28cmx25x8 cm
    Voltage input : 220V

    Upper Heater and Power supply unit (PSU):
    Heating element surface : 60 x 60mm
    Heating element length ( 25cm)
    PSU (Power supply unit) : 15x10x10cm
    PSU voltage input : 220V

    Stand:
    Height : 33cm
    Base : 25x16cm

    WORKING PRINCIPLE:

    Preheater is used to preheat the PCB from the bottom side at around 100 degree Celsius at the start of the reworking process, this is a must on lead free PCB's.

    Upper Heater is used to reflow from above the BGA IC at around 225 degree Celsius (lead free) and 180 degree Celsius (non-lead free pcb) during the reworking procedure.

    Stand is used to hold the upper heater for steady and safe reworking.

    Thermometer is used to measure the temperature of the PCB and its reworked area during the reworking process, to monitor its temperature.


    Youtube Videos :

    YouTube - Tornado Infra Pro Rework Station
    YouTube - Tornado Infra Pro Rework Station - Part 2

    Heaters are imported from Germany - known to be best heater producers


    For more info, check:
    http://www.tornadoinfra.com



    .

  2. #2
    Super Moderator GsmMobile's Avatar
    Join Date
    Jul 2006
    Location
    Gsm-Mobiles
    Posts
    1,829

    Default

    Hello,

    The tornado infra link not working? Please can you check a check on it.

  3. #3
    Product Supporter
    Join Date
    Apr 2010
    Posts
    6

    Default

    The website is offline now, for maintenance... will be online sooner.

    BR,

    Ren

  4. #4
    GsmIndia Editor mobiteck's Avatar
    Join Date
    Jul 2007
    Location
    bellary karnataka india
    Age
    36
    Posts
    476

    Default

    whats the cost of this rework station

  5. #5
    Product Supporter
    Join Date
    Apr 2010
    Posts
    6

    Default

    For purchases and inquiry, please visit the website and check from the reseller of your choice.


    Br,

    Ren

  6. #6
    GsmIndia.in Board Browser
    Join Date
    Jun 2009
    Posts
    1

    Default Product that does not work ...

    I hope to start the English excuse me because I am using a translator, I'm from mexico, well buy this product: Tornado Infrared Welding System with Stand and preheat, and the main part is the infrared, never worked, however, the pre-heater is working perfectly (by that I mean you are working with the proper voltage) ... try to find support with the manufacturer and never answered me and then with my reseller, who sent him to day warranty is no answer (GsmServer). .. I made this comment in the forum as an experience, because I think that one makes an effort (one talk of money) for having in his laboratory to have a day ... I feel cheated both the manufacturer and for the reseller...
    Last edited by angycargsm; 13-05-2010 at 09:06 PM.

  7. #7
    Product Supporter
    Join Date
    Apr 2010
    Posts
    6

    Default

    Hi angycargsm,

    Please give us more info on the problem of your station, the package and the problem while using.
    If you are using tornado infra pro station, the specifications above for tornado upper heater PSU(power supply unit) use only 220V, so please use any good transformer for that.

    If you have another problem other than that, please do notify us.

    Regards,

  8. #8
    GsmIndia Editor Sr. ataur.rahman123's Avatar
    Join Date
    Nov 2009
    Location
    India, Assam
    Age
    46
    Posts
    943

    Default another

    Quote Originally Posted by ren777 View Post
    Tornado Infra Pro Rework Station - now with bigger preheaters for FASTER and SAFER reworking!



    ---Best for Big BGA IC's such as laptop motherboards, PC motherboards, xbox360, PS3 and many other gaming consoles ---


    SPECIFICATIONS:

    Preheater:
    Heating element surface : 122 x 122mm
    LxWxH : 28cmx25x8 cm
    Voltage input : 220V

    Upper Heater and Power supply unit (PSU):
    Heating element surface : 60 x 60mm
    Heating element length ( 25cm)
    PSU (Power supply unit) : 15x10x10cm
    PSU voltage input : 220V

    Stand:
    Height : 33cm
    Base : 25x16cm

    WORKING PRINCIPLE:

    Preheater is used to preheat the PCB from the bottom side at around 100 degree Celsius at the start of the reworking process, this is a must on lead free PCB's.

    Upper Heater is used to reflow from above the BGA IC at around 225 degree Celsius (lead free) and 180 degree Celsius (non-lead free pcb) during the reworking procedure.

    Stand is used to hold the upper heater for steady and safe reworking.

    Thermometer is used to measure the temperature of the PCB and its reworked area during the reworking process, to monitor its temperature.


    Youtube Videos :

    YouTube - Tornado Infra Pro Rework Station
    YouTube - Tornado Infra Pro Rework Station - Part 2

    Heaters are imported from Germany - known to be best heater producers


    For more info, check:
    http://www.tornadoinfra.com



    .
    Please post another link.................

  9. #9
    GsmIndia.in Board Browser
    Join Date
    Sep 2010
    Posts
    1

    Default

    Do anybody have manual for Tornado Infra Pro?

  10. #10
    Product Supporter
    Join Date
    Apr 2010
    Posts
    6

    Default

    Tornado Infra Station Manual

  11. #11
    GsmIndia.in Newbie rokon's Avatar
    Join Date
    Aug 2007
    Posts
    28

    Default

    how much sir
    this produc

  12. #12
    GsmIndia.in Board Browser
    Join Date
    Oct 2010
    Posts
    1

    Default

    Hi, what's the difference between Tornado Infra and this Tornado Infra Pro? I need a small stylus for micro connectors of phones, and I think that the largest measures of heater can be a problem for small parts..

  13. #13
    Product Supporter
    Join Date
    Apr 2010
    Posts
    6

    Default

    That version of tornado infra has smaller heater or heating element. The tornado infra pro has bigger heaters that can dissipate more heat and bigger heating area. It is suitable for lead free PCB, bigger BGA IC's that is mostly used in PC motherboards, PS3, Xbox and other gaming consoles.

    For small parts, that tornado infra you have mentioned is enough already as you don't need too much heat for that.

    Regards,

  14. #14
    GsmIndia.in Board Browser
    Join Date
    Aug 2009
    Location
    TamilNadu
    Age
    32
    Posts
    7

    Default

    Did anybody using toranda infra station in india????
    Need Price Details & where i can get it in india?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •