Post Any Nokia Set's Hardware Problems Here

[hinaeem]

[QUOTE=SkyNet4u;163159]Damege..????

bgf 109 keypad ic

[One_Hermit]

[QUOTE=hinaeem;163181]

Damege..????

bgf 109 keypad ic

I mean Keypad IC or Tracks..????

[One_Hermit]

in a nokia 1200 set came to me dead after flashing set became on but when put sim in it set restart automaticly i have change rfpa problem same then remove rfpa and make jumer in it till problem same rehot cpu rfic till problem same what is the problem?whitout sim set remains ok.

imei is ok then which parts espcialy to be checked?

as i wrote before i have already checked rfpa but the ui seting not done because init local mode fail so how i write pm file?

these all are done before you post this any other solution?

First decide Whats your Actual Problem..???

Restart with SIM
or
UI Settings Failed..?????


________________________

Rehot or Reball Flash IC..



_________
SkyNet

[manojkumarpati]

Both restart with in sim before ui seting failed

[One_Hermit]

Both restart with in sim before ui seting failed

Rehot or Reball Flash IC..

[hinaeem]

[QUOTE=SkyNet4u;163159]Damege..????

Tracks

[manojkumarpati]

First decide Whats your Actual Problem..???

Restart with SIM
or
UI Settings Failed..?????


________________________

Rehot or Reball Flash IC..



_________
SkyNet

i have already done rehot and reball dear skynet plz read what iwrote,1-made fullflash,2-change c/c,3-change rfpa and then remove and jumper rfpa,4-re hot and reball cpu,5-remove bsi pf and coils change crystal. if you have any other solution such miracle tips then tell me.i am very glad for your participation and quick response.

[manojkumarpati]

what is the perticular problem for this fuilt .here is the blog

[One_Hermit]

what is the perticular problem for this fuilt .here is the blog

First try to Flash with JAF or MxKey..

If Same Change Flash IC..

[One_Hermit]

i have already done rehot and reball dear skynet plz read what iwrote,1-made fullflash,2-change c/c,3-change rfpa and then remove and jumper rfpa,4-re hot and reball cpu,5-remove bsi pf and coils change crystal. if you have any other solution such miracle tips then tell me.i am very glad for your participation and quick response.

Try this Way :
1. Erase Flash
2. Flash with MCU & CNT
3. Flash with PPM Only
4. Write Tested PM
5. Unlock

Post Result..

[manojkumarpati]

Try this Way :
1. Erase Flash
2. Flash with MCU & CNT
3. Flash with PPM Only
4. Write Tested PM
5. Unlock

Post Result..

i have erased flash and flashed with mcu and cnt then only ppm till result same asibefore wrote post new tricks if any.

[rijesh2006]

2680s charger not supported pls help me with daigram........

[REALFRIENDS]

2680s charger not supported pls help me with daigram........

Try This Solution And Post Result

[manojkumarpati]

in a n72-5 block 1 is corrupted as result sim card not valid, i have write flash with full erase then rewrite imei ,super dongle key,pm file with super sd,recover certificate,init sim lock,every thing till it shows block 1 corrupted what to do?

[manojkumarpati]

i have erased flash and flashed with mcu and cnt then only ppm till result same asibefore wrote post new tricks if any.

in a n72-5 set came to me flight mode iam checking with mxkey then it shows super dongle key is in valid,sim lock invalid,and block 1 corrupted, i have erased flash and write again then init sim lock repair sd,update certificate,write pm with super sd rebuild imei,till block 1 corrupted, result sim card not valid,except block 1 every thing is ok now,what to do?