Post Any Nokia Set's Hardware Problems Here

[shaiksha85]

is it 6300,3109,3110or any thing special because all these cables are 7pin to me plz give me solution.

bro try this trick
use external battert ( multimeter cell to your 3110c flashing cable)
1) connect the box
2) select the model and flash files
3)tick on ext.vpp then click creat ini file
4)flash

see here

[jumper-master]

Rehot Thavo with Flux..

bro try this trick
use external battert ( multimeter cell to your 3110c flashing cable)
1) connect the box
2) select the model and flash files
3)tick on ext.vpp then click creat ini file
4)flash

see here

Wao great peoples and great sugestions.........Mr.SkyNet4u and Mr.shaiksha85 you know what you say? So many cell phones killed by these tricks,any way i think you are not professionals.

[manojkumarpati]

but jumper master these are not my problem my problem 3500c was ok except music player was not running i flashed it but in few minutes it failed to flash and then set gone dead what to do?here is blog

[One_Hermit]

Wao great peoples and great sugestions.........Mr.SkyNet4u and Mr.shaiksha85 you know what you say? So many cell phones killed by these tricks,any way i think you are not professionals.

Nobody is Perfect Brother..
Not Everyone's Problems are Same..
We are Just Sharing Our Experience..

You can try that Solution which can Suit your Problem..

So Please dont Fight just Share your Experience coz it can helpful to Others..

[manojkumarpati]

Nobody is Perfect Brother..
Not Everyone's Problems are Same..
We are Just Sharing Our Experience..

You can try that Solution which can Suit your Problem..

So Please dont Fight just Share your Experience coz it can helpful to Others..

in a nokia 1200 set came to me dead after flashing set became on but when put sim in it set restart automaticly i have change rfpa problem same then remove rfpa and make jumer in it till problem same rehot cpu rfic till problem same what is the problem?whitout sim set remains ok.

[One_Hermit]

in a nokia 1200 set came to me dead after flashing set became on but when put sim in it set restart automaticly i have change rfpa problem same then remove rfpa and make jumer in it till problem same rehot cpu rfic till problem same what is the problem?whitout sim set remains ok.

Check IMEI OK or ?????

If OK check Hardware for Shorting..

[manojkumarpati]

Check IMEI OK or ?????

If OK check Hardware for Shorting..

imei is ok then which parts espcialy to be checked?

[hinaeem]

hinaeem

pls help nokia 3500c keypad problem i change ic but p c b damage plz send me an another picture slution pls pls........urgent

[manojkumarpati]

hinaeem

pls help nokia 3500c keypad problem i change ic but p c b damage plz send me an another picture slution pls pls........urgent

what do you mean by pcb damage?is it foil removed or any other thing?tell briefly.

[One_Hermit]

imei is ok then which parts espcialy to be checked?

First Write Tested PM & Unlock..

If Not Solve try this :

Attachment 23640


Try & Post Result...

__________
SkyNet

[One_Hermit]

hinaeem

pls help nokia 3500c keypad problem i change ic but p c b damage plz send me an another picture slution pls pls........urgent

Damege..????

Which Part..???

[manojkumarpati]

First Write Tested PM & Unlock..

If Not Solve try this :

Attachment 23640


Try & Post Result...

__________
SkyNet

as i wrote before i have already checked rfpa but the ui seting not done because init local mode fail so how i write pm file?

[manojkumarpati]

it is a 2700c came to me contact service after flashing and pm with super sd set became ok but in few second set goes hang and restart what is the problem?

[One_Hermit]

as i wrote before i have already checked rfpa but the ui seting not done because init local mode fail so how i write pm file?

First try to Flash with Latest Firmware..

If Still Same and Phone was Water Damege :

Change Charging Connector [if Dirty]

Rehot Flash IC..
Rehot CPU & UEM if necessary..

Your Problem will be Solved..

[manojkumarpati]

First try to Flash with Latest Firmware..

If Still Same and Phone was Water Damege :

Change Charging Connector [if Dirty]

Rehot Flash IC..
Rehot CPU & UEM if necessary..

Your Problem will be Solved..

these all are done before you post this any other solution?