Faq and first steps for atf box

[maverick_lp28]

1- FIRST HOW TO SETUP THE BOX FOR FIRST TIME ?
====================

first u need to instal v4.70 full installer and after that update with partial version like version v5.00
drivers loacated on
x:\Program Files\AdvanceBox Turbo Flasher\Driver
download setup and driver from here

2- HOW TO REGISTER AND UPDATE ?
===================


3- HOW TO REAPAIRE SUPER DONGLE (SD REPAIRE)
===================
CHOOSE NOKIA SEVICE TOOL AND THEN CHOOSE BB5
TURN TO IMIE AND LOCKS MAINTANCE
AND CHOOSE REPAIRE SUPER DONGLE AND MAKE PROCESS



4- HOW TO WRITE PM FILE WITHOUT DAMAGED SIMLOCK AREA
===================
CHOOSE NOKIA SEVICE TOOL AND THEN CHOOSE BB5
TURN TO PM MAINTANCE
MARK WRITE FULL PM AND MAKE PM AUTH AFTER DONE CHOOSE PROCESS AND CHOOSE UR MODIFIED PM WITHOUT (308-120)

[maverick_lp28]

4- HOW TO choose flash files and start flash
===================
SEE MY VIDEO FOR AUTOMATIC FLASH PROCESS

http://www.youtube.com/watch?v=hJ_TsWclpRU

[maverick_lp28]

5- HOW TO BACKUP PHONE AND HAVE SAFE REPAIRING?
==================
BEFORE DOING ANY PROCESS ALWAYS MAKE THIS STEPS NOT TO DAMAGE YOUR SET

choose BB5 main and go to imie and locks and choose IMIE maintance
and mark on (backup rpl) and press process


6- I HAVE A BACKUP AND PHONE NOW HAVE (DAMAGED IMIE OR SIMLOCK AREA ) HOW TO RESTORE ?
=======================

choose BB5 main and go to imie and locks and choose IMIE maintance
and mark on (WRITE RPL) and press process

[maverick_lp28]

7- HOW TO UNLOCK BB5 PHONES:-
===========
CHOOSE BB5 AND GO TO IMIE AND LOCKS
AND FROM SIMLOCK CHOOSE ANY METHOD TO UNLOCK YOUR PHONE



A- NCK CALC PM308
u can use for unlock this models

RAPIDO: (SL1)
============
* N95 (RM-159)
* N95 (RM-245)
* N95 (RM-160)
* E90 (RA-6)
=======================
RAP3GV2 models: (SL1)
==================
* 6630 (RM-1)
* 6680 (RM-36)
* 6681 (RM-57)
* 6682 (RM-58)
* N70 (RM-84)
* N70-5 (RM-99)
* N71 (RM-67)
* N90 (RM-42)
* N91-1 (RM-43)
* N91-8GB (RM-43)
* N91-5 (RM-158)
* N93 (RM-55)
=======================
Rap3Gv3 phones: (SL1)
====================
* 3109c (RM-274) -
* 3110c (RM-237) -
* 3250 (RM-38)
* 3500c (RM-272)
* 3500cb (RM-273)
* 5200 (RM-174)
* 5200b (RM-181)
* 5300 (RM-146)
* 5300b (RM-147)
* 5500 (RM-86)
* 5700 (RM-230)
* 5700 (RM-302)
* 6085 (RM-198)
* 6086 (RM-188)
* 6086b (RM-260)
* 6125 (RM-178)
* 6126/6133 (RM-126)
* 6131 (RM-115)
* 6131 NFC (RM-216)
* 6136 (RM-199)
* 6151 (RM-200)
* 6233 (RM-145)
* 6234 (RM-123)
* 6280/6288 (RM-78)
* 6290 (RM-176)
* 6300 (RM-217)
* 6300b (RM-222)
* 7370 (RM-70)
* 7373 (RM-209)
* 7390 (RM-140)
* 8600 (RM-164)
* E50 (RM-170)
* E50 (RM-171)
* E50 (RM-172)
* E61 (RM-89)
* E61i (RM-227)
* E62 (RM-88)
* E65 (RM-208)
* N73-1 (RM-133)
* N73-5 (RM-132)
* N75 (RM-128)
* N76 (RM-135)
* N76 (RM-149)
* N77 (RM-194)
* N80-1 (RM-92)
* N80-3 (RM-91)
* N92 (RM-100)
=================

B- NCK CALC PM120
u can use for unlock this models

Rapido SL2
============
* 5800
* 6110
* 6120c
* 6121c
* 6124c
* 6210
* 6220c
* 6290
* 6650
* E51
* E66
* E71
* N78
* N79
* N81
* N81 8gb
* N79
* N82
* N85
* N95 8gb
* N96

bb5+ (SL2)
============
* 3120C
* 3555
* 3555b
* 5310 - (V58.58; V59.59 NOT SUPPORTED)
* 5310b
* 5610
* 5610d
* 6263
* 6300i -(V57.20 NOT SUPPORTED)
* 6301
* 6500S - (V59.60 NOT SUPPORTED)
* 6500C - (V59.45 NOT SUPPORTED)
* 6555
* 7500
* 7900
* 8800
============

C- UNLOCK BY SIMLOCK RPL
u can use for unlock this models

THIS THE BEST WAYT TO UNLOCK ALL TYBE OF BB5 PHONES (SL3 NOT SUPPORTED)

[maverick_lp28]

8- HOW TO USE TURBO MODE FOR POWERFUL SPEED FLASHING :
===========================
that's very easy just choose ur files and mark on turbo mode

[maverick_lp28]

9- HOW TO REMOVE USER CODE WITHOUT CLEAR USER DATA
========================

FROM TUNING AND MAINTENANCE USE RESET USER CODE AND MAKE RESET SELECTED

[maverick_lp28]

10- CONTACT SERVERICE (PHONE START UP FAILED PLZ CONTACT REETAILURE)
=======================
this problem caused when phone check something wrong with software or hardware

CAUSES :
1- virus
u can solve this by make file system format and factory setting
or change phone firmeware

2- damaged simlock
u can repaire by simlock rpl reapaire (see num 7)

3- error in self test in simlock write good pm files (see num 4)
4- damaged imie
this can restor rpl backup (see num 5)
or buy new rpl
5- damaged sd and you can (see num 3)
6- hardware error
may be water damage or pcp damage
clean board or check uem or flash ic (check it hardware)

[el ultemo]

very nice sir...

thank you!!!

[koushalvikas]

AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

************************************************** ****
TIME STARTS HERE
************************************************** ****

BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 010C1921
ID DWORD 4 : 01001101
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000232
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000353
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 1450010F
ID DWORD 1 : 1AF47E56
ID DWORD 2 : 70525313
ID DWORD 3 : 54811B3F
ID DWORD 4 : 96979FE8
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : BA F3 A9 C3 DB FA 84 54 93 7D B7 7F 2B 88 52 B1
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 191EC665
CRC 1 : DFAAF68F
Checksum AE
SearchForBootstrap_DCT5..
CMT Loader : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv21_2nd.fg
PrepareBootstrapFile_DCT5 replaced "SILO" with "2ND\0"
PrepareBootstrapFile_DCT5 replaced "BOOT_MEDIAX" with "BOOT_MEDIA0"
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
ERROR : Sending Loader Failed, CHECK PHONE RX2 PINOUT

my set works flash fine on ufs but atf giving error i m using atf first timen give error also on usb

[GsmMobile]

AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

************************************************** ****
TIME STARTS HERE
************************************************** ****

BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 010C1921
ID DWORD 4 : 01001101
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000232
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000353
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 1450010F
ID DWORD 1 : 1AF47E56
ID DWORD 2 : 70525313
ID DWORD 3 : 54811B3F
ID DWORD 4 : 96979FE8
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : BA F3 A9 C3 DB FA 84 54 93 7D B7 7F 2B 88 52 B1
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 191EC665
CRC 1 : DFAAF68F
Checksum AE
SearchForBootstrap_DCT5..
CMT Loader : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv21_2nd.fg
PrepareBootstrapFile_DCT5 replaced "SILO" with "2ND\0"
PrepareBootstrapFile_DCT5 replaced "BOOT_MEDIAX" with "BOOT_MEDIA0"
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
ERROR : Sending Loader Failed, CHECK PHONE RX2 PINOUT

my set works flash fine on ufs but atf giving error i m using atf first timen give error also on usb

Make sure cable is ok. If the cable is ok, just try to reinstall ATF software. This would rectify the issue.

[aslambihar]

Thanks brother................................