Samsung Galaxy Fit GT-S5670 Android 2.3.6 arabic+eng
DOWNLOAD S5670JPKT4_S5670OJPKT1_JED.zip
Update: How to install it using Odin
- Once you downloaded the S5670JPKQ7 firmware packaged. Extract or unrar it.
- Download the ODIN Multi Downloader v4.38 and OPS: BENI_V1.0.OPS
ODIN Multi Downloader v4.38:
BENI_V1.0.OPS Download
NOTE: You should always do a factory reset after flashing or installing a new rom. Just make sure to back up all of your important data including contacts/messages etc.
1) Turn off your Samsung Galaxy Fit
2) Remove your SIM Card and SD Card, just to avoid any issues
3) Run ODIN 4.38.exe on your PC
4) Click the OPS button then select BENI_v1.0.ops from extracted archive and load it.
5) Tick on the One Packaged checkbox, Auto Reboot and Protect OPS were also remain checked.
6) Click on the One Packaged button then load S5670JPKQ7_S5670OJPKQ4_S5670XWKQ4_HOME.tar.md5 file.
7) Turn Off your Samsung Galaxy Fit, then reboot it into download mode by pressing POWER+VOLUME DOWN+OK Button simultaneously. Then Connect the device via USB into PC. On ODIN's COM Port Mapping will highlight into yellow color when the device is already detected.
8) If all is set and ready: Press "START" button and wait until the process completes.
9) Once it finishes you will see a word "PASS" in odin, disconnect the phone,confirm the new downloaded firmware version by typing **#1234#. You may also do a full reset to have a fresh newly firmware installed by typing *2767*3855#.
Bookmarks