Samsung N8000 Galaxy Note 10.1 Android 4.0.4 Arabic+eng firmware
Android 4.0.4:Download Here
Odin Downloader Here
Step 1 - Switch off your tablet. Now go to Download Mode. How? Press and hold the Volume Down + Power buttons together, till you see the Samsung logo or the construction Android robot and a triangle. This is the Download Mode.
Step 2 - Make sure you have your Galaxy Note 10.1 USB drivers installed on your computer.
Step 3 - Open ODIN on your computer. Connect Galaxy Note 10.1 to your computer while the tablet is in the Download Mode.
Step 4 - If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 5 - Now select the files that you have to flash/install on your tablet. These files are to be found from the extracted files in Step 1.
Click on ‘PDA’ and select file with ‘CODE’ in its name.
Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 6 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 7 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 8 - After the installation is completed, your tablet will restart. After you see the home screen, unplug your tablet from the computer.
Bookmarks