nokia n70 white screen

[sainu]

MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 05wk07v48.1
28-08-07
RM-84
(c) Nokia.
HW version: 7004
PCI version:
RFIC version:  150a160f
DSP version: rolf_05wk07v29p1
Retu version: 32
Tahvo version: 53
Production serial number: SCL845886
Product code: 0524109
Module code:
Basic production code: 0522156
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 352753019284775
IMEI spare to net: 3A 25 57 03 91 82 74 07
IMEI SV to net: 33 25 57 03 91 82 74 17 F2

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-84.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0524109
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\ODEON\JAF\products\RM-84\RM84_50737301.C0
PPM Flash file: C:\Program Files\ODEON\JAF\products\RM-84\RM84_50737301.V08
CNT Flash file: NONE
APE Variant file: ?
Done!
Backing up CRT data...
Setting FLASH MODE
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
Reading CMT NPC certificate...
Reading CMT VARIANT certificate...
Reading CMT CCC certificate...
CCC not available...
Reading CMT HWC certificate...
HWC not available...
Saved to C:\Program Files\ODEON\JAF\ProgData\35275301928477_CRT_backup _181447.rpl
Backup CRT OK!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\352753019284775_CRT_backu p_181447.pm
Done!
Backup LCK OK!
Reading SW version...05wk07v48.1
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 1FF00106490E5951F04B18933D3706951C123C53
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 225000EC <=> SAMSUNG (SEC) -> K8S6415ETB
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
Operation took 0 minutes 5 seconds...
Sending CNF Data...
APE blocks present in flash file but no APE mcu detected in phone. Aborting! .After iam chainge retu,flash,rap3g,sdram,combomemory,smps andn4203 after coming saim error with jaf whit white screen plese help me

[bpcentergtk]

in nokia n70 white screen first check that the set is working or not by trying incoming and out going calls if incoming and outgoing is working than change display ic if its is not working than change smps ic or make jumper of it