kindly give solution to this problem.
regards
kindly give solution to this problem.
regards
sir you try reheat audio ic or replace audio ic thanks
do it in SW method most of the phone is SW problem, flash it using GEOFLASHER tools, but if not work then proceed to second option which is HW method
at your service
try erasflash then full flash........................
Most Contact service problem on dct3 come fr :
Software damage = Use any free dct3 flasher (Knok95, geoflash, rollis, etc), then reset the EEPROM data Splock, Rebuild Imei, Quick set faid and reset (DCT3RP By Nep)
Cobba = Use UFS to detect the Cobba serial, if failed then replace it. (Wintesla, and DCT3RP By Nep can do this too)
Flash Chip = Rehot, Reball, or just replace it if you failed to flash the firmware
MADWD1 (CPU) = if all solutions above wont do then try to Replace this CPU Chip
Best Regards
Cool_74
hi ....... 2100 is softwear problem erase then flashing by (jaf)if not working then change flash ic
3610 it is flash problem i am 100% sure change flash ic
danish_jalal@yahoo.com
Read Ful Flash 2100 Vith Geoflasher,knok95 Write Flash To 3610
100% Pk
boz just check imei if is oooooooooooo, flash it with pmm files
Rebal The Coba Ic Ti Works Then Flash And Unlock With Dct3 Calculator
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks