6030b converted to 6030

[albarka network]

help pls i have 6030b iwant to convert it to 6030 somebody help with picture pls hel............................p

[Bull Mastiff™]

you can try this bro..tested by me 3x




post result


at your service

[albarka network]

PLS I HAVE CHANGE THE FILTER CAN I FLASH THE PHONE AFTER CHANGE THE FILTER BECAUSE THE PHONE IS NOT WORKING YET PLS HELP.............

[BC ALLIANCE]

you can try this bro..tested by me 3x




post result


at your service

yes bro try that solution its 100% tested.................
after changing that part, flash it to 6030 flash files,then write good pm files

please post result!!!

[tarey888]

I DONE WHAT YOU EXPLAIN THERE BUT NO SIGNAL I DONE FULL FLASHING BUT STILL THE SAME IF YOU HAVE A PM FILE SO PLEASE GIVE ME PLAESE tarey888@yahoo.com

[tarey888]

now its ok thanks to all this a good forum

[1amigo]

yes bro try that solution its 100% tested.................
after changing that part, flash it to 6030 flash files,then write good pm files

please post result!!!

I have done this successfully on one phone but now on the 2nd phone , the phone is dead after flashing which actually stopped at 27%. After that now when i try to flash cpu and ppm seperately, cpu flashing completes ok but while ppm flashing gives erasing error
Erasing area: 017C0000 - 01BFFFFF...
Error erasing area: 01840000 - 0185FFFF

any help?

[baraka42]

@ 1amigo,

first try it with 6030b fw again if get any result , then try erase with jaf and flash .

[1amigo]

@ 1amigo,

first try it with 6030b fw again if get any result , then try erase with jaf and flash .

I am looking to find the 6030b firmware but still unable to find it, my friend. If you know a link, please post it here. I'll be highly obliged.

[quasim0438]

I have done this successfully on one phone but now on the 2nd phone , the phone is dead after flashing which actually stopped at 27%. After that now when i try to flash cpu and ppm seperately, cpu flashing completes ok but while ppm flashing gives erasing error
Erasing area: 017C0000 - 01BFFFFF...
Error erasing area: 01840000 - 0185FFFF

any help?

first try to complete erase ppm area by using a special file created by 6030 mcu file....you can create the erase file with this software NOKIA ERASE FILE BUILDER
after that flash your phone with 6030 latest firmware....write a good pm and it will ok...........
.............................::::::::::BEST WISHES::::::::::::::.........................

[elfeky]

everything is fine but the signal is not good up & down

[kennyluuuuu]

Did you mean after change that filter, then flash 6030 RM-74 and write good 6030PM
After reflash 6030b RM-225 firmware when insert SIM it my phone can power now.

Many thanks

[kennyluuuuu]

When i try to load my phone to 6030 RM-74 it can not Extract CNT pack and phone dead again. Any solution sir. pls

Many thanks

[kennyluuuuu]

By the way how can you unlock 6030b? i mean what box did you use.

[cha8888]

By the way how can you unlock 6030b? i mean what box did you use.

ive tried jaf v1.98.10... just unlock.... and it s done...


sir vuru, kindly post 6030b convert to 6030 in sequence or by order...?
1. change filters
2. flash it using 6030 rm-74 files? then,...