help pls i have 6030b iwant to convert it to 6030 somebody help with picture pls hel............................p
Printable View
help pls i have 6030b iwant to convert it to 6030 somebody help with picture pls hel............................p
you can try this bro..tested by me 3x
http://i72.photobucket.com/albums/i1...to206030-1.jpg
post result
at your service
PLS I HAVE CHANGE THE FILTER CAN I FLASH THE PHONE AFTER CHANGE THE FILTER BECAUSE THE PHONE IS NOT WORKING YET PLS HELP.............:confused:
I DONE WHAT YOU EXPLAIN THERE BUT NO SIGNAL I DONE FULL FLASHING BUT STILL THE SAME IF YOU HAVE A PM FILE SO PLEASE GIVE ME PLAESE tarey888@yahoo.com:confused: :confused:
now its ok thanks to all this a good forum
I have done this successfully on one phone but now on the 2nd phone , the phone is dead after flashing which actually stopped at 27%. After that now when i try to flash cpu and ppm seperately, cpu flashing completes ok but while ppm flashing gives erasing error
Erasing area: 017C0000 - 01BFFFFF...
Error erasing area: 01840000 - 0185FFFF
any help?
@ 1amigo,
first try it with 6030b fw again if get any result , then try erase with jaf and flash .
first try to complete erase ppm area by using a special file created by 6030 mcu file....you can create the erase file with this software NOKIA ERASE FILE BUILDER
after that flash your phone with 6030 latest firmware....write a good pm and it will ok...........
.............................::::::::::BEST WISHES::::::::::::::.........................
everything is fine but the signal is not good up & down
Did you mean after change that filter, then flash 6030 RM-74 and write good 6030PM
After reflash 6030b RM-225 firmware when insert SIM it my phone can power now.
Many thanks
When i try to load my phone to 6030 RM-74 it can not Extract CNT pack and phone dead again. Any solution sir. pls
Many thanks
By the way how can you unlock 6030b? i mean what box did you use.
hello viru sir 6030 to 6030b convert possible please tell me i am waiting this
pls put here good pm file of 6030
Here is the working solution to convert 6030b to 6030 to work on 900/1800 Mhz :-
* Check firmware ver 5.24 or 5.25 and u should have the firmware file installed as unlocking this model is done via patch.
* latest ver of HWK or JAF to unlock the phone.
* Dont flash the phone, just write a good pm file of 6030.
* change filter as per pic shown in previous post.
Enjoy all networks.
PS. If find this post helpful just hit repu button.........
Here is the 6030 good pm file also. Thanks