COM3 [VCP0] selected
Device: Airtel Cordless FGD8900
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: unlock
Warning ! After unlock process finished make this:

1. be sure that there is NO any SIM card in phone
2. press phone "Power" button and power-On phone
3. press phone "Power" button and power-Off phone
4. NOTE ! SIM card can be blocked during first power-On so use SIM card
that you ready to move to trash w/o problems !
5. now you can power-On phone with SIM card

Do you understand instruction and want to continue ?
unlock method: standard
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E220A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 003Ex010000 0008x002000] 4Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
.
detection phase #2...
................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom]...
file saved: C:\Program Files\InfinityBox\MModule\backup_eeprom_20080412-114011.B0E.bin
flash: 01227E220A2201:18E59F00000000
Backup required data Done
Patch required data...
detection procedure, wait...
detection procedure completed
detection procedure, wait...
detection procedure completed
Patch required data Done
Special operation...
detecting additional parameters...
......
flash: 01227E220A2201:18E59F00000000
flash: 01227E220A2201:18E59F00000000
Write: area 0/1
flash: 01227E220A2201:18E59F00000000
flash: 01227E220A2201:18E59F00000000
Write: area 0/2
..........
additional parameters detected Ok
Special operation Done
Write...
flash: 01227E220A2201:18E59F00000000
Write: eeprom
Write Done
Finalization...
Finalization Done
Finished, time used: 121 sec
Remove/Install battery now !