Mcnpro light Box official version 1.2.1.6 Released
What's new for Mcnlight box version 1.2.1.6 ? New!! Hot!!
- MTK 6252 bugs fixed (IMEI / Read / Write etc)
- MTK new Flash ICs added
- Improved MTK USB Pin-find function
- Update Main software to V1.2.1.6
- Other small report bugs fixed
Upgrading from Previous Versions:
- As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.
★★★★★ Mcnpro light Box version 1.2.1.7 ★★★★★
What's new for Mcnlight box version 1.2.1.7 ? New!! Hot!!
- Spreadtrum new Flash ICs added
- Spreadtrum unlock function Improved
- CoolSand new Flash ICs added
- CoolSand unlock function Improved
- Mstar new Flash ICs added
- Mstar 8532B/33BX read /write Improved (Full Support) Hot!!
- Improved MTK USB Pin-find function
- Update Main software to V1.2.1.7
- Box Firmware upgrade to V3.09
- Other small report bugs fixed
Code:
22:46:23 Welcome to use McnPro light Box
22:46:23 Baud setting ...
22:46:25 Set Baud done
22:46:25 SW V12.17
22:46:25 FW 3.09
22:46:25 SN MCNLxxxxxxxxxxxx
22:46:25 AC xxxx-xxxx-xxxx-xxxx-xxxx
22:46:25 Box Connected! |
Upgrading from Previous Versions:
As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.
Mcnpro light Box official version 1.2.1.8 Released
What's new for Mcnlight box version 1.2.1.8 ? New!! Hot!!
- USB Cable stand function added
- Update Main software to V1.2.1.8
- Other small report bugs fixed
What is USB CABLE stand function ?
- Using stand USB cable operational any related procedure without Pinout Define;
- Manual define the USB pinout , then using USB cable operational any related procedure;
Upgrading from Previous Versions:
As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.
Mcnpro light Box version 1.2.1.9
USB Cable stand function improved
CoolSand new Flash ICs added
CoolSand reported bugs fixed
Mstar unlock function improved
MTK 6250/6252A read/write Improved
MTK new test boot update to new version
MTK Android phone IMEI Change/repair function added
Add support Spreadtrum SC6530 (AMD32-128,SPANSION,Samsung,INTEL,Numonyx,SST,TSB,CFEON etc)
Update Main software to V1.2.1.9
Other small report bugs fixed
download here : http://www.filedwon.com/wh3rqsjarf7t...dater.exe.html
supported site : http://forum.mcnbox.com/
For New version Discussion / Feedback etc!!
Best regards !
Mcnbox Team
Mcnpro Box Suite version 2.1.3 Released (Box V3.3.5 and ChinaRes V1.2.9)
Mcnpro Box Suite version 2.1.3 included:
- Mcnpro Box Official Main version 3.3.5 New!!
- Mcnpro Box ChinaRes Editor version 1.2.9
- Mcnpro Box Virtual oscilloscope tools
- Mcnpro Box Online Updater V 2.1
What's new for Mcnpro box version 3.3.5 ? New!! Hot!!
- USB Cable stand function added
- CoolSand new Flash ICs added
- CoolSand reported bugs fixed
- Mstar new Flash ICs added
- Mstar unlock function improved
- MTK 6250/6252A read/write Improved
- MTK new Flash ICs added
- MTK Android phone IMEI Change/repair function added
- Spreadtrum new Flash ICs added
- Add support Spreadtrum SC6530 (AMD32-128,SPANSION,Samsung,INTEL,Numonyx,SST,TSB,CFEON etc)
- Update Main software to V3.3.5
- Other small report bugs fixed
Upgrading from Previous Versions:
As usual, Version 3.3.5 request install Suite version 2.1.3 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!
Mcnpro light Box official version 1.2.2.0 Released
What's new for Mcnlight box version 1.2.2.0 ? New!! Hot!!
MTK IMEI Change Power On/Off Mode function Improved
MTK unlock function new method added
CoolSand new Flash ICs added
CoolSand IMEI Change new method added
Spreadtrum new Flash ICs added
Update Main software to V1.2.2.0
Other small report bugs fixed
Upgrading from Previous Versions:
As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.
ChinaRes Editor 1.3.0 (MTK android flash ICs supported)
Mcnpro box ChinaRes Editor 1.3.0 released
What's new for ChinaRes Editor version 1.3.0 ?
- Add MTK android flash ICs supported (Beta) First in the world
- Add Spreadtrum new Flash ICs supported
- Other small bugs fixed
Upgrading from Previous Versions:
As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !
Mcnpro Box official version 3.3.6 Released
What's new for Mcnpro box version 3.3.6 ? New!! Hot!!
CoolSand new Flash ICs added
Mstar new Flash ICs added
Mstar unlock function improved
Spreadtrum new Flash ICs added
Spreadtrum reported write bugs fixed
Update Main software to V3.3.6
Other small report bugs fixed
Upgrading from Previous Versions:
As usual, Version 3.3.6 request install Suite version 2.1.3 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!
For more information check at here
What's new for Mcnpro box version 3.3.7 ?
|
What's new for Mcnpro box version 3.3.7 ? New!! Hot!!
- Completed fix MT625A bugs. (Special thank ASHAKAAS Help tested)
- Update Main software to V3.3.7
- Other small report bugs fixed
Upgrading from Previous Versions:
As usual, Version 3.3.7 request install Suite version 2.1.3 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!
THANKS ASHAKAAS LUCKYCELL JENEPONTO SUL-SEL INDONESIA RAYA
|
|
|
Mcnpro Box official version 3.3.8 Released
What's new for Mcnpro box version 3.3.8 ? New!! Hot!!
- Add New flash ICs for MTK
- Improving MTK new Chips read /write
- Update Main software to V3.3.8
- Other small report bugs fixed
Upgrading from Previous Versions:As usual, Version 3.3.8 request install Suite version 2.1.3 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!
Mcnpro Box official version 3.3.9 hot Released
What's new for Mcnpro box version 3.3.9 ? New!! Hot!!
- Update MTK bootloader 7/8 to support New CPU
- Spreadtrum new Flash ICs added
- Spreadtrum reported Read/Write bugs fixed
- Update Main software to V3.3.9
- Other small report bugs fixed
Upgrading from Previous Versions:As usual, Version 3.3.9 request install Suite version 2.1.3 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from
support section , You also can using
updater direct upgrade your software online!
Mcnpro light Box official version 1.2.2.3 Released
What's new for Mcnlight box version 1.2.2.3 ? New!! Hot!!
Release contains:
- MTK bootloader update to support new CPU
- Fixed MTK write bugs for some special ICs
- Spreadtrum new Flash ICs added
- Spreadtrum add support Andriod base phone (Read/write/Unlock/IMEI Change)
- Spreadtrum Unlock function improved
- Fixed Mstar write flash bugs
- Mstar Unlock function improved
- Update Main software to V1.2.2.3
- Other small report bugs fixed
Code:
18:21:04 Welcome to use McnPro light Box
18:21:04 Baud setting ...
18:21:09 Set Baud done
18:21:09 SW V12.23
18:21:09 FW 3.09
18:21:09 SN MCNLxxxxxxxxxxxxxx
18:21:09 AC 8888-8888-8888-8888-8888
18:21:09 Box Connected!
Upgrading from Previous Versions:
As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.
Mcnpro Box official version 3.4.0 Released
To All,
Merry Christmas
-----------------------------------------------------------------------
What's new for Mcnpro box version 3.4.0 ? New!! Hot!!
- Improve Android MTK Read info & Write Function
- Standard Android platform added (Beta) Hot!!
- Support IMEI Change
- Support Clear Screen Lock
- CoolSand reported bugs fixed
- Spreadtrum new Flash ICs added
- Update Main software to V3.4.0
- Other small report bugs fixed
Upgrading from Previous Versions:As usual, Version 3.4.0 request install Suite version 2.1.4 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from
support section , You also can using
updater direct upgrade your software online!
Mcnpro light Box official version 1.2.2.4 Released
What's new for Mcnlight box version 1.2.2.4? New!! Hot!!
Release contains:
- Improve Android MTK Read info & Write Function
- Standard Android platform added (Beta) Hot!!
- Support IMEI Change
- Support Clear Screen Lock
- CoolSand reported bugs fixed
- Spreadtrum new Flash ICs added
- Update Main software to V1.2.2.4
- Other small report bugs fixed
Upgrading from Previous Versions:
- As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.
Mcnpro light Box official version 1.2.2.5 Released
What's new for Mcnlight box version 1.2.2.5? New!! Hot!!
Release contains:
Improve Standard Android platform Hot!!
Spreadtrum Read & Write reported bugs fixed
Spreadtrum new Flash ICs added
MTK new Flash ICs added
Update Main software to V1.2.2.5
Other small report bugs fixed
Upgrading from Previous Versions:
- As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.