...:: Mcnpro Box version All Updates Post Only Here ::...

Mcnpro Box Suite version 2.0.9 included:

• Mcnpro Box Official Main version 3.1.7 New!!
• Mcnpro Box ChinaRes Editor version 1.2.5 Free!!
• Mcnpro Box Virtual oscilloscope tools Free!!

Quote:

---

- What's new for Mcnpro box version 3.1.7 ?

• MTK Pinout detect improved (MTK 6252 / 6236 etc)
• Mcnpro box Firmware version upgrade to V1.12
• Other small report bugs fixed

- ChinaRes Editor version 1.2.5 Free!!

• Information check at Mcnpro Box related section

- Virtual oscilloscope tools Free!!

---

Upgrading from Previous Versions:

• As usual, new version is available for all customers with valid, To download that from support section !

Mcnpro box ChinaRes Editor 1.26 released New!

Spreadtrum Language detection Improved
Add Some new Nand flash (Eg, some special files)
Other small report bugs fixed


Upgrading from Previous Versions:

Version of 1.26 is a maintenance release. (require install suite version 2.09 first) so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from Support Forums

Send our congratulations to World University Games Shenzhen (China) 2011

What's new for version 3.1.8 ? New! Hot!

• MTK 6252 / 6151 detection improved
• MTK New flash ICs added
• SPD automatic Nv data restore function added
• SPD safe mode format function improved
• SPD new flash ICs added
• Mstar Nand flash detection improved
• Mstar New flash ICs added
• Mcnpro box Firmware version upgrade to V1.13

Code:

---

Welcome to use McnBox!
Selected COM5
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2011xxxxxxxx
Firmware V1.13
Checksum 72DA-42BB
Box Connected!
Ready working at COM5



---

• Other small report bugs fixed

Upgrading from Previous Versions:

Version of 3.1.8 request install Suite version 2.0.9 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

What's new for version 3.1.9 ? New! Hot!

• MTK 6252 / 6151 / 6236 / 6516 read/write bugs fixed
• MTK New flash ICs added
• SPD Nand flash write bugs fixed
• Infineon 7880 detection & write bugs fixed
• Infineon 7890 / 7900 CPU added
• Mcnpro box Firmware version upgrade to V1.15

Code:

---

Welcome to use McnBox!
Selected COM5
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2011xxxxxxxx
Firmware V1.15
Checksum 72DA-42BB
Box Connected!
Ready working at COM5

---

• Other small report bugs fixed

Upgrading from Previous Versions:

• Version of 3.1.9 request install Suite version 2.0.9 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

What's new for version 3.2.0 ? New! Hot!

• MTK 6252 read/write bugs fixed
• MTK New flash ICs added
• SPD New flash ICs added
• Other small report bugs fixed

Upgrading from Previous Versions:

• Version of 3.2.0 request install Suite version 2.0.9 and Firmware version upgrade to V1.15 at first , so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

Time for another new version

There are a few new features to help you along, which we've listed below.


Mcnpro Box Suite version 2.1.0 included:

• Mcnpro Box Official Main version 3.2.1 New!!
• Mcnpro Box ChinaRes Editor version 1.2.7 New!!
• Mcnpro Box Virtual oscilloscope tools

What's new for Mcnpro box version 3.2.1 ?

• Add SPD new Flash ICs
• Add SPD 6610/6620 to supported
• Fix SPD SC6600L detection bugs
• SPD SC6600L bootloader improved
• Add Mstar new Flash ICs
• Add Mstar 8533x to supported
• Add AD6905 Platform to supported(Beta version)
  
  • Write/Read (Backup) Full flash for phones
  • Write/Read (Backup/ Restore) NV data for phones
  • Direct unlock User code phones
  • Automatic CPU/ Chips infomation detection
  • Upgrade/downgrade phone firmware
  • Repair software-related problems
  • Via flash to repair dead phones
  • Can Empty board flashing(After flash chip replacement)
  • Save operation process results in Log file
  • Read/write IMEI for all AD6905 based models
• Other small report bugs fixed

ChinaRes Editor version 1.2.7

• Add direct font change function
• Base SPD CPU phone detection Improved
• Other small report bugs fixed

Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !

For more information check at Here.


For chinese mobile phone solution, Stay with us is your best choice !

What's new for Mcnpro box version 3.2.2 ? New!!

• Spreadtrum 6610/20 new Flash ICs added
• Spreadtrum 6610/20 format bugs fixed
• Spreadtrum bootloader detecting info added

Quote:

---

[G:8 11 12 16 D-:9 D+:10 Down:7] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM45
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot2...
CPU Info 6600M/E
Flash Type NOR
Flash ID 00EC257E(25082501)
Flash Model K5L2931CAM
Flash Size 0x1000000(16.0M)
Start Reading...

---

...

• Spreadtrum bootloader improved
• Add Mstar new Flash ICs
• Mstar bootloader improved
• Other small report bugs fixed

Upgrading from Previous Versions:

Version of 3.2.2 request install Suite version 2.1.0 and Box Firmware version upgrade to V1.15 at first . So we recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !

What's new for Mcnpro box version 3.2.3 ? New!!

• Spreadtrum new Flash ICs added
• Spreadtrum format bugs fixed
• Add Software version detect version

Quote:

---

Welcome to use McnBox!
Selected COM9
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxxxx
Firmware V1.15
Checksum 15B9-21BE
Software V3.23
Box Connected!
Ready working at COM9
...

---

• Spreadtrum bootloader improved
• Other small report bugs fixed

Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !

What's new for Mcnpro box version 3.2.4 ? New!!

• Spreadtrum new Flash ICs added
• Spreadtrum 6800H Now supported (Beta)
• Spreadtrum bootloader improved
• Mstar new Flash ICs added
• Mstar bootloader improved
• Mstar Nor /Nand flash IC Auto detected function added
• MTK new flash ICs added
• Other small report bugs fixed

Upgrading from Previous Versions:
Version of 3.2.4 request install Suite version 2.1.0 at first, As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !

What's new for Mcnpro box version 3.2.5 ? New!!

• Spreadtrum new Flash ICs added
• Mstar new Flash ICs added
• Mstar 85xx unlcok function improved
• MTK 6235 (some special) Read bugs fixed
• MTK new Flash ICs added
• MTK bootloader 7 updated
• Other small report bugs fixed

Upgrading from Previous Versions:
Version of 3.2.5 request install Suite version 2.1.0 at first, As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !

Mcnpro Box Suite version 2.1.0 included:

Mcnpro Box Official Main version 3.2.6 New!!
Mcnpro Box ChinaRes Editor version 1.2.9 New!!
Mcnpro Box Virtual oscilloscope tools


What's new for Mcnpro box version 3.2.6 ?

Spreadtrum new Flash ICs added
Fix Spreadtrum bootloader automatic detection bugs
Fix Spreadtrum 6610 / 6620 read /write bugs
Improved MTK 62xx decryption (New Flash IC)
Add MTK USB Pin-find function (Eg. MT6252 just few second)
Add MTK USB read / write function (Beta)
Fix Mstar bootloader automatic detection bugs
Mstar Nand flash Write operations improved
Other small report bugs fixed


What's new for ChinaRes Editor version 1.2.9 ?

Keypad define layout function improved
Add MTK new flash ICs supported
Add Spreadtrum new Flash ICs supported
Some UNICODE character match bugs fixed
Other small bugs fixed


Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from supported section

Mcnpro Box official version 3.2.7 Released


What's new for Mcnpro box version 3.2.7 ?

• Fix Spreadtrum bootloader automatic detection bugs
• Fix Spreadtrum 6800H read /write bugs
• Spreadtrum new driver version 1.5.6.1 added
• Spreadtrum new Flash ICs added
• Improved MTK USB Pin-find function
• Improved MTK USB read /write bugs
• Other small report bugs fixed

Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !



Best regards

Mcnbox

What's new for Mcnlight box version 1.2.1.0 ? New!! Hot!!

• Improve CoolSand CPU Read /Write Function
• Improve CoolSand CPU IMEI Change Function
• Improved Tubro mode flash phone speed
• Improved Spreadtrum 6800H read /write
• Spreadtrum new Flash ICs added
• Fix Mstar read /write bugs
• Update Main software version to 1.2.1.0
• Other small report bugs fixed

Code:

---

22:24:46 Welcome to use McnPro light Box
22:24:46 Baud setting ...
22:24:51 Set Baud done
22:24:51 SW V12.10
22:24:51 FW V2.04
22:24:51 SN MCNL8888888888888
22:24:51 AC 8888-8888-8888-8888-8888
22:24:51 Box Connected!

---

Upgrading from Previous Versions:

• As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !

What's new for Mcnlight box version 1.2.1.2 ? New!! Hot!!

Improved CoolSand Read /Write (Full Support) Hot!!
Improved Spreadtrum 6800H read /write/format (Full Support) Hot!!
Improved Spreadtrum 880XG boot loader
Spreadtrum new Flash ICs added
Improved Mstar read /write bugs
Update Main software to V1.2.1.2
Update Box Firmware to V2.05
Other small report bugs fixed

Quote:

---

22:24:46 Welcome to use McnPro light Box
22:24:46 Baud setting ...
22:24:51 Set Baud done
22:24:51 SW V12.12
22:24:51 FW V2.05
22:24:51 SN MCNL8888888888888
22:24:51 AC 8888-8888-8888-8888-8888
22:24:51 Box Connected!

---

Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.





Only Us dedicated to your success !!!



Best regards !

Mcnbox Team

What's new for Mcnpro box version 3.3.0 ? New!! Hot!!

• Add CoolSand CPU complete supported
• • Read / Write
  • IMEI Change
  • Format
  • Unlock
  • Factory Set
  • Read Code
• Spreadtrum new Flash ICs added (6610/20)
• Spreadtrum read/write bugs fixed (6800H)
• Spreadtrum bootloader improved(880xG)
• MTK new Rx/Tx pin detection method added
• MTK read /write bugs fixed (For New CPU)
• Other small report bugs fixed

Quote:

---

Welcome to use McnBox!
Selected COM9
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxxxx
Firmware V1.15
Checksum 15B9-21BE
Software V3.30
Box Connected!
Ready working at COM9
...

---

Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!

Best regards !


Mcnbox Team

What's new for Mcnlight box version 1.2.1.3 ? New!! Hot!!

• Improved CoolSand Read /Write (Full Support) Hot!!
• CoolSand new Flash ICs added
• Spreadtrum new Flash ICs added
• Update Main software to V1.2.1.3
• Update Box Firmware to V2.06
• Other small report bugs fixed

Code:

---

20:32:38 Welcome to use McnPro light Box
20:32:39 Baud setting ...
20:32:40 Set Baud done
20:32:41 SW V12.13
20:32:41 FW V2.06
20:32:41 SN MCNL8888888888888
20:32:41 AC 8888-8888-8888-8888-8888
20:32:41 Box Connected!

---

Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.

What's new for Mcnpro box version 3.3.1 ? New!! Hot!!


Improved CoolSand CPU Read /Write
CoolSand new flash ICs added
Spreadtrum read/write bugs fixed
Spreadtrum New flash ICs added
Improved MT6276 /6255 read/write bugs
Improved MTK new Rx/Tx pin detection method
Improved MT65xx CPU (6573/6516) read/write bugs
Other small report bugs fixed
Quote:
Welcome to use McnBox!
Selected COM9
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxxxx
Firmware V1.15
Checksum 15B9-21BE
Software V3.31
Box Connected!
Ready working at COM9
...




Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!







We are sure , Mcnpro Box Still is the best product for chinese mobile phone ! what you are waiting for ??


Best Regards !


Mcnbox Team

What's new for Mcnlight box Olympic version 1.2.1.4 ? New!! Hot!!

MT62xx (6276 /6255) read/write bugs fixed
MT65xx CPU (6573/6516/6575/6577) complete supported Hot!!
MTK Auto format bug fixed
CoolSand CPU Read /Write bugs fixed
CoolSand new flash ICs added
Spreadtrum 6800H read/write bugs fixed
Spreadtrum New flash ICs added
Mstar new Flash ICs added
Update Main software to V1.2.1.4
Other small report bugs fixed



Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.

What's new for Mcnpro box version 3.3.3 ? New!! Hot!!


MTK 65xx bugs fixed
MTK new Flash ICs added
Improved MTK USB Pin-find function
Improved MTK USB read /write bugs

Quote:

---

Welcome to use McnBox!
Selected COM9
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxxxx
Firmware V1.15
Checksum 15B9-21BE
Software V3.33
Box Connected!
Ready working at COM9
...

---

Upgrading from Previous Versions:

As usual, Version 3.3.3 request install Suite version 2.1.2 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!


This month offer special price for Mcnpro Box !

Contact our reseller for best price !

Best regards !

Mcnbox Team

What's new for Mcnlight box version 1.2.1.5 ? New!! Hot!!

• MTK 65xx bugs fixed
• MTK new Flash ICs added
• Improved MTK USB Pin-find function
• Improved MTK USB read /write bugs
• Spreadtrum New flash ICs added
• Mstar new Flash ICs added
• Update Main software to V1.2.1.5
• Other small report bugs fixed

Upgrading from Previous Versions:

• As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.

What's new for Mcnlight box version 1.2.1.6 ? New!! Hot!!

• MTK 6252 bugs fixed (IMEI / Read / Write etc)
• MTK new Flash ICs added
• Improved MTK USB Pin-find function
• Update Main software to V1.2.1.6
• Other small report bugs fixed

Upgrading from Previous Versions:

• As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.

What's new for Mcnlight box version 1.2.1.7 ? New!! Hot!!

• Spreadtrum new Flash ICs added
• Spreadtrum unlock function Improved
• CoolSand new Flash ICs added
• CoolSand unlock function Improved
• Mstar new Flash ICs added
• Mstar 8532B/33BX read /write Improved (Full Support) Hot!!
• Improved MTK USB Pin-find function
• Update Main software to V1.2.1.7
• Box Firmware upgrade to V3.09
• Other small report bugs fixed

Code:

---

22:46:23 Welcome to use McnPro light Box 22:46:23 Baud setting ... 22:46:25 Set Baud done 22:46:25 SW V12.17 22:46:25 FW 3.09 22:46:25 SN MCNLxxxxxxxxxxxx 22:46:25 AC xxxx-xxxx-xxxx-xxxx-xxxx 22:46:25 Box Connected!

---

Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.

What's new for Mcnlight box version 1.2.1.8 ? New!! Hot!!

• USB Cable stand function added
• Update Main software to V1.2.1.8
• Other small report bugs fixed

What is USB CABLE stand function ?

• Using stand USB cable operational any related procedure without Pinout Define;
• Manual define the USB pinout , then using USB cable operational any related procedure;

Upgrading from Previous Versions:
As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.

USB Cable stand function improved
CoolSand new Flash ICs added
CoolSand reported bugs fixed
Mstar unlock function improved
MTK 6250/6252A read/write Improved
MTK new test boot update to new version
MTK Android phone IMEI Change/repair function added
Add support Spreadtrum SC6530 (AMD32-128,SPANSION,Samsung,INTEL,Numonyx,SST,TSB,CFEON etc)
Update Main software to V1.2.1.9
Other small report bugs fixed

download here : http://www.filedwon.com/wh3rqsjarf7t...dater.exe.html

supported site : http://forum.mcnbox.com/

For New version Discussion / Feedback etc!!


Best regards !

Mcnbox Team

Mcnpro Box Suite version 2.1.3 included:

• Mcnpro Box Official Main version 3.3.5 New!!
• Mcnpro Box ChinaRes Editor version 1.2.9
• Mcnpro Box Virtual oscilloscope tools
• Mcnpro Box Online Updater V 2.1

What's new for Mcnpro box version 3.3.5 ? New!! Hot!!

• USB Cable stand function added
• CoolSand new Flash ICs added
• CoolSand reported bugs fixed
• Mstar new Flash ICs added
• Mstar unlock function improved
• MTK 6250/6252A read/write Improved
• MTK new Flash ICs added
• MTK Android phone IMEI Change/repair function added
• Spreadtrum new Flash ICs added
• Add support Spreadtrum SC6530 (AMD32-128,SPANSION,Samsung,INTEL,Numonyx,SST,TSB,CFEON etc)
• Update Main software to V3.3.5
• Other small report bugs fixed

Upgrading from Previous Versions:
As usual, Version 3.3.5 request install Suite version 2.1.3 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!

What's new for Mcnlight box version 1.2.2.0 ? New!! Hot!!

MTK IMEI Change Power On/Off Mode function Improved
MTK unlock function new method added
CoolSand new Flash ICs added
CoolSand IMEI Change new method added
Spreadtrum new Flash ICs added
Update Main software to V1.2.2.0
Other small report bugs fixed

Upgrading from Previous Versions:
As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section ! You also can using Updater direct upgrade to last version.

Mcnpro box ChinaRes Editor 1.3.0 released

What's new for ChinaRes Editor version 1.3.0 ?

• Add MTK android flash ICs supported (Beta) First in the world
• Add Spreadtrum new Flash ICs supported
• Other small bugs fixed

Upgrading from Previous Versions:


As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !

What's new for Mcnpro box version 3.3.6 ? New!! Hot!!

CoolSand new Flash ICs added
Mstar new Flash ICs added
Mstar unlock function improved
Spreadtrum new Flash ICs added
Spreadtrum reported write bugs fixed
Update Main software to V3.3.6
Other small report bugs fixed

Upgrading from Previous Versions:
As usual, Version 3.3.6 request install Suite version 2.1.3 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!

For more information check at here

What's new for Mcnpro box version 3.3.7 ? New!! Hot!! Completed fix MT625A bugs. (Special thank ASHAKAAS Help tested) Update Main software to V3.3.7 Other small report bugs fixed Upgrading from Previous Versions: As usual, Version 3.3.7 request install Suite version 2.1.3 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online! THANKS ASHAKAAS LUCKYCELL JENEPONTO SUL-SEL INDONESIA RAYA

What's new for Mcnpro box version 3.3.8 ? New!! Hot!!

• Add New flash ICs for MTK
• Improving MTK new Chips read /write
  
• Update Main software to V3.3.8
• Other small report bugs fixed

Upgrading from Previous Versions:

As usual, Version 3.3.8 request install Suite version 2.1.3 at first,We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section , You also can using updater direct upgrade your software online!