Results 1 to 2 of 2

Thread: .::How To Repair Dead,Restart,Hang V3,v400,v300,v600,v500,v180,v220 solution::.

  1. #1
    GsmIndia.in Active Teen
    Join Date
    Oct 2006
    Age
    36
    Posts
    95

    Talking .::How To Repair Dead,Restart,Hang V3,v400,v300,v600,v500,v180,v220 solution::.

    I want to share this to all my gsmindia members :-

    a simple tips in repairing Dead,Restart,Hang motorola phones such as V3, v400,v300,v600,v500,v180,v220.

    Dead no power

    First make sure your battery is 100% ok and charger
    If you cant seem to get it to power even with a external power supply
    Wont go to boot mode by pressing (hold and press +and# then power button)
    No responds with charger

    step 1:-
    1.Try to boot phone by pressing (hold and press +and# then power button) if its goes to boot mode try to flash phone if not

    step 2:-
    2.Try to connect phone to smart-moto and check if phone is in flash mode already thats why it wont turn on

    step 3:-
    3.Rehot PA module or remove it and try to turn phone on without PA . if PA is shorted phone wont turn on or no responds at all with any power supply ( some shorted PA cannot be tested by a tester in battery terminal so I recommend that you take PA out , base on my experience )

    Additional info

    Phone turns on then goes off rite away even with a charger
    Phone only turn on with a charger plug in
    Phone chargers but drains rite away

    1.Its 100% PA problem to


    Signal problem

    Signal is good but cant make calls
    Call Failed and cant received calls
    No signal at all

    1.Try to flex or full flash phone if you still get called failed or no signal
    2.Try to reheat PA module if you still get called failed or no signal
    3.Change PA module 100% PA problem , after change PA and still no signal full flash phone with monster pack or any full flash
    4.After that smile your phone is working

    Hang

    Phone turns on after few minute phone hangs or keys not working , (check if phone hangs when signal appears) PA in fault

    1 Try master clear if still hangs
    2.Full factory reset if still hangs
    3.Try full flash phone if still hangs
    4.Reheat PA or remove and observe phone with out PA module faulty PA causes software to hang

    Restart

    Phone restarts by it self , phone restart when making a call or receiving calls

    1 Try master clear if still restarts
    2.Full factory reset if still restarts
    3.Try full flash phone if still restarts
    4.100% faulty PA





  2. #2
    GsmIndia Editor Sr. ..::Mr_Fone::..'s Avatar
    Join Date
    Oct 2006
    Location
    U A E
    Age
    39
    Posts
    931

    Default

    hi good info keep it br,......................

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SE hardware repair shell
    By basqui in forum Sony Ericssion Hardware Repair Section
    Replies: 5
    Last Post: 30-06-2012, 01:29 PM
  2. Nokia 1650 Complete Hardware Repair Solution
    By nurul47 in forum Nokia Hardware Repair Section
    Replies: 2
    Last Post: 22-09-2010, 06:12 PM
  3. SUPPORTED MODELS AND FEATURES - Updated - 17 MAY 2008 -
    By DIGITAL BABU in forum FuriouS Box
    Replies: 5
    Last Post: 25-11-2009, 03:11 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •