i have come across many 3100 and 6100 with contact service problem i have try to flash them with latest file problem same could some body give 100% solutionn for this problem and is there a way to know if it is hardware or software contact service?
Printable View
i have come across many 3100 and 6100 with contact service problem i have try to flash them with latest file problem same could some body give 100% solutionn for this problem and is there a way to know if it is hardware or software contact service?
100% from this problem cant give you nobody ..Quote:
Originally Posted by jamky
Tray do next
Srart your UFS and put manuall your model
Take OFF point AUTODETECT PRODUCT
Make full ERASE
Write latest version MCU+PPM+CNT
Write good working PM (can reading it from good working phone)
Make full UI Setting
Write result here ..
PS: This is solution working from all phones DCT4
PPS: When it not soved your problems you need reball UPP and Flash IC ...
Good luck !
- Read UEM for backup RPL
- Rehot / reball UEM.
thanks for the reply but one thing how do i choose CNT because when i open i find many cnts
Quote:
Originally Posted by jamky
YOU HAVE TO SELECT SAME CNT AS PPM.
FOR EXAMPLE YOU HAVE SELECT W PPM TTHEN YOU HAVE TO SELECT CNT WITH W
can anyone explain ,what is rpl file used for ??
o.k will try, and thanks for your help
change uem and write rpl file means write uemQuote:
Originally Posted by jamky
rpl file is imei file .contact service, imei ????????/ use rpl fileQuote:
Originally Posted by al-gsm
Hi Dear Mostley Hardwhere Problem ........................
..::mr Fone::..
r_grameen@yahoo.com
RONY@GSM
i want 1110i display digram
i have a best answear before u cheak on off contact service or no and change upp i mean cpu ,,,,,,,,,,,,,,,,,, 100% ok