nokia 6020 flashing error

[speed infotech]

Getting MCU ID

MCU ID: 0x2142
FLASH ID0: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-30\
Scanning for ini files...
INI file .ini is missing. Continue searching for second ini type...
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.220
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.22w
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.22.image_india
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.220
Booting phone...
MCU ID: 0x2142
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A0
Boot is ready...
FLASH ID0: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0xF822EC00
Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x7518; Loader chk: 70
Loader is ready...
P-key nokia module version 01.02
MSID: 848FFF47142E6E9F1555414A41
MSID decoded: 28C7BAE90046028DAA000000
FAID: 7B83D4F5E9EC39F535727586
Operation took 0 minutes 13 seconds...
Erasing...
Found 3 interval(s) to erase
Erasing area: 01000000 - 0101FFFF...
Erasing area: 01020000 - 0185FFFF...
Erasing area: 01E60000 - 01FDFFFF...
Operation took 1 minutes 33 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 53 seconds...
Restarting MCU...
CNT: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.22.image_india
Booting phone...
Phone didn't answer with TX line high after UEM reset!
Causes:
1. BSI line is not connected properly in connector -> Check cable, also for 3.3k resistor in serial with bsi line.
2.UEM damaged -> replace UEM.
MCU ID: 0xCCCC
This MCU ID is not supported in chosen flash file...
Error booting phone...


help sir

[khan00012]

plz rehot ur uem or rebaal it also rehot your flash ic