1100 not charging 100% solution

**...::ARIF::…** · 11-06-2011, 01:14 PM

**dilipnachna** · 11-06-2011, 06:43 PM

dont make direct jumper. use diode in series. other wise battery may be damaged.

**mdakhan** · 12-06-2011, 05:52 PM

Originally Posted by dilipnachna

dont make direct jumper. use diode in series. other wise battery may be damaged.

your right sir......

**PALMOBILE@SAMSUNG** · 12-06-2011, 06:14 PM

Originally Posted by dilipnachna

dont make direct jumper. use diode in series. other wise battery may be damaged.

i agree with you master after make this curcit jumper battary have prob like batt back up,auto charging
so use diode compalsury/

**azeem_butt2010** · 12-06-2011, 06:34 PM

which diod used for this soulation
tell its no

**One_Hermit** · 12-06-2011, 06:39 PM

Originally Posted by azeem_butt2010

which diod used for this soulation
tell its no

For Not Charging Try This :

Attachment 26966

**dilipnachna** · 13-06-2011, 08:38 AM

Originally Posted by azeem_butt2010

which diod used for this soulation
tell its no

u can use diode from 1100.2600.3310and other old nokia phones charging section. if u have not than u can use zener diode 4.7volt from radio and tv,s pcb .or can buy from electronics parts shop.

**jayantassam** · 13-06-2011, 02:26 PM

all about 1100 or (any) nokia mobile for charging jumper like this !!!!....

as i know charger has about 9 to 12 volt without load ..after load it become 3.7 to 4

volt(with battery).

think.. if somebody plugged charger without battery what will be happen ??

so.. i do not think this type of charging jumper good idea for all(any) mobile