Octoplus JTAG / JTAG PRO Software Updates

[sdtelecom]

Octoplus JTAG Software v1.7.0 is out!

WE have added world's first FREE IMEI Repair and FREE Sony C1504, C1505, ST21i, ST21a, ST21i2, ST21a2, ST26i, ST26a Unlock via JTAG (no server, no credits, no queues, no limits).
Also added support for ZTE Z222.!

Octoplus Box JTAG Software v1.7.0 Release Notes

Added support for the following models:

- Sony C1504 - added world's first Unlock, Repair IMEI, improved Repair operation.
- Sony C1505 - added world's first Unlock, Repair IMEI, improved Repair operation.
- Sony ST21i - added world's first Unlock, Repair IMEI, improved Repair operation.
- Sony ST21a - added world's first Unlock, Repair IMEI, improved Repair operation.
- Sony ST21i2 - added world's first Unlock, Repair IMEI, improved Repair operation.
- Sony ST21a2 - added world's first Unlock, Repair IMEI, improved Repair operation.
- Sony ST26i - added world's first Unlock, Repair IMEI, improved Repair operation.
- Sony ST26a - added world's first Unlock, Repair IMEI, improved Repair operation.
- ZTE Z222 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).
Uploaded new Repair file for Pantech P8010.
Uploaded full flash file for Samsung GT-S7500.
Added new Core ID (406B10E1) for MSM8960.
Added new Core ID (503C10E1) for MSM7227T.
All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).



Download Octoplus Box JTAG Software v1.7.0

[Service Team]

Octoplus Box JTAG Software v.1.7.2 Release Notes:

• Added support for the following models:
  
  • LG E435 - added Dead Boot Repair via USB
  • LG E435F - added Dead Boot Repair via USB
  • LG E435G - added Dead Boot Repair via USB
  • LG E435K - added Dead Boot Repair via USB
  • Prestigio MultiPhone PAP4020 DUO - added Dead Boot / Device Repair (thanks to Mr. Dr_Wolodya)
  • ZTE Z990G - added Dead Boot / Device Repair (thanks to Mr. Dr_Wolodya)
  • Samsung SGH-Z370 - added Dead Boot / Device Repair (thanks to Mr. Dr_Wolodya)
  
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

Download Octoplus Box JTAG Software v.1.7.2

[sdtelecom]

Octoplus JTAG Software v.1.7.3 is out!

We have added boot repair via USB and small TP for LG D321, D325, D325F8, D325G8, P700, P705, P705f, P705f, P705GO, P708g, P710, P712, P713, P713GO, P713TR, P714, P715, P716, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for HTC Desire 300 (0P6A100)!

Octoplus Box JTAG Software v.1.7.3 Release Notes

Added support for the following models:

- LG D321 (based on MSM8610) - added Dead Boot Repair via USB
- LG D325 (based on MSM8610) - added Dead Boot/Phone Repair via USB
- LG D325 (based on MSM8210) - added Dead Boot/Phone Repair via USB (in test mode)
- LG D325F8 (based on MSM8610) - added Dead Boot Repair via USB
- LG D325G8 (based on MSM8610) - added Dead Boot Repair via USB
- LG P700 - added Dead Boot Repair via USB
- LG P705 - added Dead Boot Repair via USB
- LG P705F - added Dead Boot Repair via USB
- LG P705GO - added Dead Boot Repair via USB
- LG P708G - added Dead Boot Repair via USB
- LG P710 - added Dead Boot Repair via USB
- LG P712 - added Dead Boot Repair via USB
- LG P713 - added Dead Boot Repair via USB
- LG P713GO - added Dead Boot Repair via USB
- LG P713TR - added Dead Boot Repair via USB
- LG P714 - added Dead Boot Repair via USB
- LG P715 - added Dead Boot Repair via USB
- LG P716 - added Dead Boot Repair via USB
- HTC Desire 300 (0P6A100) - added Dead Boot Repair, Repair CID, Repair IMEI (thanks to Mr. Dr_Wolodya)
All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, do next steps:
Attach testpoint as shown on Figure 1 in Software manual, and connect phone with Micro USB cable directly to mainboard USB port (don´t use USB hubs!).
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you had´nt installed a driver. Drivers are in {Installation_Folder}\Driver\QHSUSB.
Release testpoint and press EasyRepair button in software (or Connect button, when in Advanced Mode).

Download Octoplus Box JTAG Software v.1.7.3

[sdtelecom]

ctoplus JTAG Software v.1.7.4 is out!

We have added boot repair via USB and small TP for LG D320, D320F, D320N, D380, D385, MS323,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for LG C410, ZTE Z993, Samsung GT-B6520!

Octoplus Box JTAG Software v.1.7.4 Release Notes

Added support for the following models:
- LG D320 - added Dead Boot Repair via USB
- LG D320F - added Dead Boot Repair via USB
- LG D320N - added Dead Boot Repair via USB
- LG D380 - added Dead Boot / Device Repair via USB
- LG D385 - added Dead Boot Repair via USB
- LG MS323 - added Dead Boot Repair via USB
- LG C410 - added Dead Boot / Device Repair
- ZTE Z993 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
- Samsung GT-B6520 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.7.4

[sdtelecom]

Octoplus JTAG Software v.1.7.5 is out!

We have added boot repair via USB and small TP for LG D370, D370TR, D373, D373EU, D375, D410, D410H, D410HN,
which are detected by PC as "Qualcomm HS-USB QDLoader 9008" device!
Also added repair via JTAG interface for Huawei G510-0010 and Y301-A1 (MetroPCS)!

Octoplus Box JTAG Software v.1.7.5 Release Notes

Added support for the following models:
- LG D370 - added Dead Boot Repair via USB
- LG D370TR - added Dead Boot Repair via USB
- LG D373 - added Dead Boot Repair via USB
- LG D373EU - added Dead Boot/Device Repair via USB
- LG D375 - added Dead Boot Repair via USB
- LG D410 - added Dead Boot/Device Repair via USB
- LG D410H - added Dead Boot Repair via USB
- LG D410NH - added Dead Boot Repair via USB
- Huawei G510-0010 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
- Huawei Y301-A1 (MetroPCS) - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
All pinouts and Repair procedures are described in the manual ("Help" button in Software).


To repair mentioned above devices via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.7.5

[sdtelecom]

Octoplus JTAG Software v.1.7.6 is out!

We have added boot repair via USB and small TP for LG D170, D175F, D180F, D400H, D400HN, D405, D405H, D405N, D405TR, D415, D724,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Octoplus Box JTAG Software v.1.7.6 Release Notes

Added support for the following models:
- LG D170 - added Dead Boot/Device Repair via USB
- LG D175F - added Dead Boot Repair via USB
- LG D180F - added Dead Boot Repair via USB
- LG D400H - added Dead Boot Repair via USB
- LG D400HN - added Dead Boot Repair via USB
- LG D405 - added Dead Boot Repair via USB
- LG D405H - added Dead Boot Repair via USB
- LG D405N - added Dead Boot Repair via USB
- LG D405TR - added Dead Boot Repair via USB
- LG D415 - added Dead Boot Repair via USB
- LG D724 - added Dead Boot/Device Repair via USB
All pinouts and Repair procedures are described in the manual ("Help" button in Software).


To repair mentioned above devices via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.7.6

[Service Team]

Octoplus Box JTAG Software v.1.7.7 Release Notes:

• Added support for the following models:
  
  • LG E980 - added Dead Boot/Device Repair via USB.
  • LG E980H - added Dead Boot Repair via USB.
  • LG E985T - added Dead Boot Repair via USB.
  • LG E986 - added Dead Boot Repair via USB.
  • LG E988 - added Dead Boot Repair via USB.
  • LG E989 - added Dead Boot Repair via USB.
  • Gigabyte GSmart G1317D - added Dead Boot Repair (thanks to Mr. Dr_Wolodya).
  
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.7.7

[sdtelecom]

Octoplus JTAG Software v.1.7.9 is out!

We have added boot repair via USB and small TP for LG D280N, D280G, LG D285, D285F, D285G, D315, D315K,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Octoplus Box JTAG Software v.1.7.9 Release Notes

Added support for the following models:
- LG D280N - added Dead Boot Repair via USB
- LG D280G - added Dead Boot Repair via USB
- LG D285 - added Dead Boot/Device Repair via USB
- LG D285F - added Dead Boot Repair via USB
- LG D285G - added Dead Boot Repair via USB
- LG D315 - added Dead Boot Repair via USB
- LG D315K - added Dead Boot/Device Repair
Added new Core ID (107180E1) for Qualcomm APQ8064
All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.7.9

[Service Team]

Octoplus Box JTAG Software v.1.8.0 Release Notes:

• Added support for the following models:
  
  • LG D618 - added Dead Boot/Device Repair via USB
  • LG F240K - added Dead Boot Repair via USB
  • LG F240L - added Dead Boot Repair via USB
  • LG F240S - added Dead Boot Repair via USB
  • Samsung GT-S5302 - added Dead Boot/Device Repair
  
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair LG D618, F240K / L / S via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.0

[Service Team]

Octoplus Box JTAG Software v.1.8.5 Release Notes:

• Added support for the following models:
  
  • LG F160LV - added Dead Boot / Device Repair via USB
  • LG F160K - added Dead Boot Repair via USB
  • LG F160S - added Dead Boot Repair via USB
  • Huawei E171 (CPU: HiSilicon HI6731) - added Dead Boot / Device Repair via JTAG
  • ZTE P752D - added Dead Boot/Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
  
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.5

[sdtelecom]

Octoplus JTAG Software v.1.8.6 is out!

We have added Boot Repair via JTAG for LG Optimus LTE II F160LV, LG F160K, LG F160S
and via USB and small TP for LG F70 F370K, LG F370L, F370S.

Octoplus Box JTAG Software v.1.8.6 Release Notes

Added support for the following models:
- LG F160LV - added Dead Boot/Device Repair via JTAG
- LG F160K - added Dead Boot Repair via JTAG
- LG F160S - added Dead Boot Repair via JTAG
- LG F370K - added Dead Boot Repair via USB
- LG F370L - added Dead Boot Repair via USB
- LG F370S - added Dead Boot Repair via USB
All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.6

[sdtelecom]

Octoplus JTAG Software v.1.8.7 is out!

We have added Boot Repair via USB and small TP for LG VS930 and LG F160L
and via JTAG for TeXet TM-3200R, Crius Q7A and Huawei G520-0000!

Octoplus Box JTAG Software v.1.8.7 Release Notes
Added support for the following models:
- LG VS930 - added Dead Boot Repair via USB
- LG F160L - added Dead Boot Repair via USB
- TeXet TM-3200R - Dead Boot/Device Repair via JTAG (thanks to mr. Drunya_L)
- Crius Q7A - Dead Boot / Device Repair via JTAG (thanks to mr. DZ_Developer)
- Huawei G520-0000 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)
All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG VS930 and LG F160L via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.7

[sdtelecom]

Octoplus JTAG Software v.1.8.8 is out!

We have added Boot Repair via USB and small TP for LG D165G, LG D415RD, LG VS870
and via JTAG for HTC HD7 (PD29100) and Huawei E586!

Octoplus Box JTAG Software v.1.8.8 Release Notes

Added support for the following models:

- LG D165G - added Dead Boot Repair via USB
- LG D415RD - added Dead Boot Repair via USB
- LG VS870 - added Dead Boot / Device Repair via USB
- HTC HD7 (PD29100) - added Dead Boot Repair, Repair IMEI, Repair CID, Read Codes via JTAG (thanks to mr. Chromgsmunlock)
- Huawei E586 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)
All pinouts and Repair procedures are described in the manual ("Help" button in Software)


To repair LG D165G, LG D415RD and LG VS870 via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.8

[Service Team]

Octoplus Box JTAG Software v.1.8.9 Release Notes:

• Added support for the following models:
  
  • LG P930 - added Dead Boot Repair via USB
  • LG LU6200 - added Dead Boot Repair via USB
  • HTC One M7 (PN0720000) - added Dead Boot Repair, Repair IMEI, Repair CID via JTAG
  • Huawei Y300-0000 - added Dead Boot Repair via JTAG (thanks to Mr. Dr_Wolodya)
  
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair LG P930 and LG LU6200 via USB, please follow the next three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in{Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.9

[shaiksha85]

Octoplus JTAG Software v.1.9.3 is out!

Here is the small update, while we are focused on bigger things.. We're not dead, we're not sleeping. We're working!
Today we have added support for Samsung Galaxy S4 Mini, Samsung Galaxy Pocket Plus, Huawei Ascend Y200 and HTC Titan!

Octoplus Box JTAG Software v.1.9.3 Release Notes

• Added support for the following models

- Samsung SPH-L520 - added Dead Boot / Device Repair
- Samsung GT-S5301L - added Dead Boot Repair
- Huawei U8655-1 - added Dead Boot Repair
- HTC Titan (PI39110) - added Dead Boot Repair, Repair IMEI (in Test Mode), Repair CID (in Test Mode)

• Added new Core ID (ID: 706B40E1) for MSM8960 CPU
• All pinouts and Repair procedures described in the manual ("Help" button in the Software)

Download Octoplus Box JTAG Software v.1.9.3
Find out more at: www.octoplusbox.com