G FIVE U505 Flasing Prblm

[murasuarivu]

Initializing...
DA_LIB_VER_3.6.7.1
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
Failed to read HardCode, REG=0x80000008
Error: Failed to read REG=0x80010008
Error: Failed to read REG=0x84010008
Error: Failed to read REG=0x80001008
Connection Failed.

[shaiksha85]

Initializing...
DA_LIB_VER_3.6.7.1
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
Failed to read HardCode, REG=0x80000008
Error: Failed to read REG=0x80010008
Error: Failed to read REG=0x84010008
Error: Failed to read REG=0x80001008
Connection Failed.

Check The Connector First & Try In Changing CPU ( Change MTK To SPD )
Both Of CPUS Available In Same Model

Always Post Full Details

Which Box Using & Complaint Of Mobile

[Service Team]

Initializing...
DA_LIB_VER_3.6.7.1
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
Failed to read HardCode, REG=0x80000008
Error: Failed to read REG=0x80010008
Error: Failed to read REG=0x84010008
Error: Failed to read REG=0x80001008
Connection Failed.

post ur thread in gpg section.......

check the box driver

then connect the vcc+,- check it...

then connect the box check it....

select the internal ram then read info

post ur reply