G-five T33+ dead

[jptsunil]

I flashed G-five T33+ dead phone
same info before flash and after flash
what to do.........

COM2 [VCP0] selected
module v3.25
Device: Autodetect 6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9703:0000
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:18A59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
detecting chip #01 in region #00...
flash: EC240200000000:18A59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
detecting chip #02 in region #00...
flash: EC240200000000:18A59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
detecting chip #03 in region #00...
flash: EC240200000000:18A59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: EC240200000000:18A59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
detecting chip #01 in region #00...
flash: EC240200000000:18A59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
it's time to stop: 18B09FA518B09FA518B09FA518B09FA518B09FA518B09FA5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
.
search rom info finished
searching rom info...
.
search rom info finished
warning: rom info information not found, possible reasons:
- old firmware type w/o rom info information
- empty (completely or partially erased) flash chip
- damaged firmware
- damaged hardware (bad soldered or damaged flash chip)
> if phone works fine just ignore this warning <
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset assigned: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
firmware area: 00000000-00DFFFFF
detecting ffs/eeprom structure pass 1...
.................................................. ......
ffs/eeprom: can't detect record name location
error: ffs/eeprom detection failed: element #1
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
detecting firmware version...
.................................................. ..............
.................................................. ..............
done
warning: can not detect firmware version
if software freez: make "Find firmware version (slow process)" unchecked and repeat operation.
detecting firmware build...
.................................................. ..............
done
detecting product-id...
.................................................. ..............
done
detecting languages...
..............................................
language parameters detected
detected languages: En Ru Fr Es Id Tr Hi Urdu Farsi Pt Ar
Finished, time used: 1 min 48 sec
Remove/Install battery now !

[jptsunil]

It is a nice post......

I need solution
nice for what.............
did you have solution

[siddharth.jain]

i flashed g-five t33+ dead phone
same info before flash and after flash
what to do.........

Com2 [vcp0] selected
module v3.25
device: Autodetect 6205-6239 nor
checking data, wait...
Advanced flash detection enabled
action: Read/check information
====> boot ...
Press and hold power button now !
19200 fixed
connecting, wait...
Initializing [6225:8a05:8a00]...
Cpu: Mt6225
high speed boot on
chip: 0001:9703:0000
status: Ff
boot packet size: 0400
release power button now !
Boot done
====> initialize ...
Detecting chip #00 in region #00...
Flash: Ec240200000000:18a59f00000000
flash: Samsung k5l2833ata t 16mb
otp offset: 00ff0000
detecting chip #01 in region #00...
Flash: Ec240200000000:18a59f00000000
flash: Samsung k5l2833ata t 16mb
otp offset: 00ff0000
detecting chip #02 in region #00...
Flash: Ec240200000000:18a59f00000000
flash: Samsung k5l2833ata t 16mb
otp offset: 00ff0000
detecting chip #03 in region #00...
Flash: Ec240200000000:18a59f00000000
flash: Samsung k5l2833ata t 16mb
otp offset: 00ff0000
number of flash chip/regions detected: 04/01
initialize done
====> set baud ...
921600
set baud done
====> initialize bootcode ...
Initialize bootcode done
====> check firmware integrity ...
Device parameters detection in progress...
Detecting chip #00 in region #00...
Flash: Ec240200000000:18a59f00000000
flash: Samsung k5l2833ata t 16mb
otp offset: 00ff0000
detecting chip #01 in region #00...
Flash: Ec240200000000:18a59f00000000
flash: Samsung k5l2833ata t 16mb
otp offset: 00ff0000
it's time to stop: 18b09fa518b09fa518b09fa518b09fa518b09fa518b09fa5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
Usb bootloader detect (phase #2)...
..
Usb bootloader (chip) is absent
searching rom info...
.
Search rom info finished
searching rom info...
.
Search rom info finished
warning: Rom info information not found, possible reasons:
- old firmware type w/o rom info information
- empty (completely or partially erased) flash chip
- damaged firmware
- damaged hardware (bad soldered or damaged flash chip)
> if phone works fine just ignore this warning <
detecting ffs/eeprom area in 1 chip(s)...
Standard ffs/eeprom offset assigned: 00e00000
standard ffs/eeprom offset confirmed: 00e00000
detecting ffs/eeprom size...
Ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00e00000-00ffffff
firmware area: 00000000-00dfffff
detecting ffs/eeprom structure pass 1...
.................................................. ......
Ffs/eeprom: Can't detect record name location
error: Ffs/eeprom detection failed: Element #1
sec info (detailed) detection...
Searching sec info#1...
.
Search sec info#1 finished
detecting firmware version...
.................................................. ..............
.................................................. ..............
Done
warning: Can not detect firmware version
if software freez: Make "find firmware version (slow process)" unchecked and repeat operation.
Detecting firmware build...
.................................................. ..............
Done
detecting product-id...
.................................................. ..............
Done
detecting languages...
..............................................
Language parameters detected
detected languages: En ru fr es id tr hi urdu farsi pt ar
finished, time used: 1 min 48 sec
remove/install battery now !

reballing the mtk 6225 cpu will work for you....

[rambabusharma]

I have been recently surfing a lot and found some of the best websites on the internet. One such site is Flipkart where in we can buy a lot of gadgets with huge discounts and offers.

What if you get the Latest Mobile Phones at very attractive prices and with the manufacturers warranty. This would be great, isn't it?