27.12.2011 CDMA Olive C2110 Supported
Added support for: CDMA Olive C2110
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
Printable View
27.12.2011 CDMA Olive C2110 Supported
Added support for: CDMA Olive C2110
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
Added feature to disable Target ID check during resurrection
If current ID is not supported by a DLL, user can switch off ID check and still be able to try resurrection.
Though, we don't recommend it. Do it only if you are sure what you're doing and if you're sure that device
with unmatched target ID is still exactly the same model as stated in DLL.
Please note, upon JTAG Manager exe startup this option is automatically switched off.
To disable Target ID do the following:
-> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCODE . . ."
http://www.jtagbox.com/downloads/man...es/ID_Code.jpg
Added preset "Erase Full NAND/NOR Memory" (for this use Settings by Code button)
DCC operations presets will ensure proper use of DCC TAB features. To select DCC Operation preset, do the following:
-> DCC Read/Write TAB -> Settings By Code -> Select desired preset
http://www.jtagbox.com/downloads/man...des/preset.jpg
Firmware 1.29
---------------------------
- MPCore targets handling is improved.
- Fixed bug in the ARM7 handling routines: h/w breakpoints were disabled each time any halt operation was performed
- Added auxiliary instruction which improves GDB Server functionality.
28.12.2011 Direct JTAG Access to Flash Memory Plugin v1.01, TEGRA2 eMMC Supported
Whats new:
- Added MSM6500
- Added TEGRA2 eMMC controller #2 support
- Added partition access selection for eMMC devices
- Fixed AutoFlash Size bug for eMMC devices
Added support for :- Samsung Galaxy Note (GT-N7000) Unbrick
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
29.12.2011 Samsung Galaxy Note (GT-i9220) Unbrick – Boot Repair Supported
Added support for: Samsung Galaxy Note (GT-i9220) Unbrick
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
Whats new :
HTC Incredible S Unbrick, Unlock, CID, IMEI repair supported
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
31.12.2011 A new Year gift ! Samsung GT-i9103 Galaxy Z / Galaxy R (TEGRA2) Boot repair / Unbrick
Resurrecting Samsung I9103 is easy.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inside; sometimes pressing Power On key during connection may be required. External power supply can be used too.
During some definite startup time (1…3 seconds) TEGRA2 chipsets are not detected via JTAG interface (this could be due to FUSE-d security): that is, on contrary to other devices, which being fused are detected via JTAG but non-haltable, TEGRA2 chipsets give ‘Nothing Detected’ response (though TCK-RTCK pair keeps functioning ok).
Please note: If during resurrection of dead unit the JTAG connection cannot be established (nothing is detected) then re-try with the NRST wire disconnected.
To resurrect Samsung I9103:
- Solder JTAG cable to Samsung I9103 JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure Samsung I9103 is selected in the list of models;
- Click Resurrect button;
- If nothing is detected then try with NRST wire disconnected;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
RIFF Box – JTAG Revolution
Galaxy RulerZZZZZZZZZZZZ
Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported
Added support for: 05.01.2012 Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
10.01.2012 Samsung SGH-T759 Exhibit 4G Unbrick – Boot Repair supported
Added support for Samsung SGH-T759 Exhibit 4G
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
10.01.2012 Samsung GT-i8150 Galaxy W (Samsung Ancora) Unbrick – Boot repair supported
Resurrecting Samsung I8150 is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Please note, MSM8255T is dual core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.
To resurrect Samsung I8150:
- Solder JTAG cable to Samsung I8150 JTAG pads;
- Make sure Samsung I8150 is selected in the list of models;
- Insert battery and connect USB Data cable;
- If you use only battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
- Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
HTC Inspire 4G A9192 (HTC Stallion) Unbrick, Boot, IMEI, CID, ModelID, Unlock supported
Resurrecting HTC Inspire is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Inspire boards have JTAG interface disabled (that is enable MARM JTAG Fuse is ****n in the MSM chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 0.85.0024. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD9812000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE ****n then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Inspire:
- Solder JTAG cable to HTC Inspire JTAG pads;
- Insert batter and connect USB Data cable;
- Make sure HTC Inspire is selected in the list of models;
- If you use only battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
http://www.jtagbox.com/wp-content/up...inspire_4g.jpg
HTC Droid Incredible 2 ADR6350 Boot repair, Unlock, CID, ModelID, IMEI Update
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
09.02.2012 Samsung Galaxy Precedent SCH-M828 Unbrick supported
---------------------------------------------------- Bug Fix updates
HTC_WildfireS.dll
-------------------------------------
- new HTC partition data for 2Kb NAND chips is used since old was reported to cause proximity sensor problems
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
14.02.2012 HTC ThunderBolt 4G ADR6400 (HTC Mecha) Unbrick – Boot repair supported
Bug Fix
HTC_DesireS.dll
-------------------------------------
- ID 0x27B360E1 is added to allowed list
HTC_Supersonic.dll
-------------------------------------
- added resurrection data for 4Kb NAND chips, so now DLL has data for both 4KB and 2KB versions.
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
Some important news for today :
New updates:
- Samsung GT-P6200 Galaxy Tab 7.0 Plus Unbrick/Boot repair
- ZTE Light Tab (ZTE V9) Unbrick/Boot repair
- Huawei Ideos S7 Unbrick/Boot repair
- Orange Boston (Commtiva Z71) Unbrick/Boot repair
- Samsung Galaxy TAB (P1000N) Unbrick/Boot repair
- CDMA Samsung F219 Unbrick/Boot repair
Bug fixes:
- QSC1100_X14_NOR,
- QSC60XX_L18_D08_NOR,
- QSC60XX_L20_D08_NOR,
- QSC60XX_L24_D08_NOR
Have a nice weekend !
RIFF Box – JTAG Revolution
So, again good news for RIFF users - make money before Your competitors do it !
24.02.2012 Samsung YP-G70EW Galaxy S WiFi 5.0 Unbrick
We rule the Galaxy !
www.jtagbox.com
25.02.2012 JTAG Manager 1.39 released
Whats new:
Fixed bug which caused poping-up of ‘Out of Free Disk space’ window error while real error was just a failed HASH.
eMMC chip size is now represented not only in bytes but additionally, for visual convenience, in Mega/Giga bytes
Addres/Length fields on DCC Read/Write and JTAG Read/Write pages are changed into custom GUI representation: now 12(or 8)-digit hex values are shown in more human ‘readable’ way.
For more convenient work with the DCC Read/Write page features there was added standard lengths list, so user can set ‘human readable’ length value instead of manual typing of correct hexadecimal length value. For this just click combo box near Data Length field and select a desired length.
Example:
.
http://www.jtagbox.com/wp-content/up.../DCC_size2.jpg
Now its possible to select any value from 1MB to 16GB, plus, in case of writing file, You can simply use “File Size” to automatically read opened file size and use it’s length.
Added balloon hints to suggest what to do in case user has ‘DLL was not Accepted’ issue.
Selected resurrector DLL version is shown in logging windows now along with Model name, for example:
“Selected Resurrector: [NoName x1234 V1.00]“
Added “Search for DLL” button on the Resurrection page:
As RIFFBOX grows up on number of supported devices, searching visually through the big lists of supported models for a definite device name became a tiresome procedure.
Now user can search for required model simply typing part of model name in the search dialog (for this select “Search for DLL for this Model Name” and type some part of device name you’re looking for)
Example:
.
http://www.jtagbox.com/wp-content/up...12/02/name.jpg
.
Besides this, there is feature to search for resurrectors compatible with specific IDCODE. For example, if you have a not supported device in hands with ID = 0xXXXXXXXX, you can search for DLLs which work with such ID and try to connect your device using one of such ‘compatible’ DLLs. (for this select “Search for DLL with same IDCODE” and type IDCODE you’re looking for)
Example:
.
http://www.jtagbox.com/wp-content/up.../02/IDCODE.jpg
PLEASE NOTE!!! New resurrectors data base format is used in 1.39 version, thus
upon first start the JTAG MANGER WILL RESTART 1-5 TIMES in order to re-load and re-fresh all existing resurrector DLLs.
25.02.2012 DirectProgramming.dll Version 1.02
Whats new:
- Added MSM7627A eMMC controller #3 support World First !
- Added S5PC100/S5PC110 eMMC controllers #0..3 support World First !
- Added MDM9600 NAND Controller support - World First !
- Addres/Length fields are changed into custom GUI representation:
- now 12-digit hex values are shown in more human ‘readable’ way.
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
27.02.2012 RIFF Jtag Updates:
- Samsung GT-P6800 Galaxy Tab 7.7 Unbrick - Boot repair supported, World First !
- Qualcomm FullImage Files Plugin v1.05
- Samsung i9000-like FullImage Files Plugin v1.03
Who rule the Galaxy ? ? ?
RIFF Box – JTAG Revolution
28.02.2012 RIFF JTAG Updates:
Whats new:
- RIFF JTAG – Samsung SGH-i777 Galaxy S II Unbrick – Boot Repair supported, World First ! ! !
- RIFF JTAG – Samsung GT-S7500 Galaxy Ace Plus Unbrick – Boot Repair supported, World First ! ! !
Come to the dark side, we'll rule the Galaxy !
RIFF Box – JTAG Revolution
29.02.2012 RIFF JTAG Updates:
RIFF JTAG Manager v1.40
Whats new:
- Solved the problem with download of updates. Now no more nasty ‘Out of Disk Space’ error!!!Some users could experience this kind of error during download of large files (30MB and more). These errors were often with Wi-Fi configurations where certain routers dind’t handled passive ports FTP data transfers properly.
- Added check if JTAG Manager is running with administrator rights (in case it is installed in Program Files location).
- This solves issues for older operating systems (Windows XP) which have no UAC and no manifest means controlling elevation of application rights. Thus – now if the JTAG Manager is started without administator rights it will restart itself with request to run it “as administrator”.
- Embedded font for text message window on JTAG Read/Write page.
- Improved displaying of DLL version information: If FileVersion info is available JTAG Manger will display it rather than the internal version supplied by DLL.
- This simplifies version tracking for us.
- Download speed limit is increased to 250kb/s
Please click “Check for Updates” button in order to download and apply new updates.
Samsung Wave 3 GT-S8600 Unbrick - Boot repair supported, World First ! ! !
RIFF Box – JTAG Revolution
01.03.2012 RIFF JTAG - More CDMA models + Samsung S5360 supported
Whats new:
Added full repair support for following phone models:
Samsung GT-S5360 Galaxy Y
Samsung B219 (CDMA)
Samsung S189 (CDMA)
Alcatel OT255C (CDMA)
Check www.jtagbox.com for more JTAG related news.
Check RIFF Box Torrent tracker for easy download of RIFF Software and flash files.
www.jtagbox.com
06.03.2012 RIFF JTAG – Samsung SGH-T499 Dart (Samsung Tass) Unbrick – Boot Repair supported
Repairing bricked Samsung T499 is easy with RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung T499:
- Solder JTAG cable to Samsung T499 JTAG pads;
- Make sure Samsung T499 is selected in the list of models;
- Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Up’ and ‘Home’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.
.
http://www.jtagbox.com/wp-content/up...-t499_dart.jpg
Update was done in 20 minutes, thanks to user Trung from Vietnam !
13.03.2012 RIFF JTAG - SonyEricsson new BOOTROM support and more !
Whats new:
Unlock/Repair TA is now supported for new BOOTROM version in following models:
- E15a (SE_E15a.dll),
- E15i (SE_X8.dll),
- U20a (SE_U20a.dll),
- U20i (SE_U20i.dll),
- E10i (SE_X10_Mini.dll)
HTC Neon Unbrick – Boot Repair, IMEI and CID update supported.
www.jtagbox.com
16.03.2012 RIFF JTAG Updates :
- Samsung GT-i9210 Galaxy S II LTE Unbrick - Dead Boot Repair
- QUALCOMM Partition Tool v1.06
- Galaxy Partition Tool v1.04
Bug Fix Updates :
- HTC Sensation (PG85130)
- HTC Evo 3D (HTC Shooter)
Who Rules the Galaxy ? http://forum.gsmhosting.com/ubb/biggrin.gif
www.jtagbox.com
19.03.2012 RIFF JTAG – HTC EVO View 4G Unbrick, Unlock, IMEI and CID update supported
Repairing bricked HTC EvoView4G is easy using RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected. Please note, battery presense is required.
Some (or all) revisions of HTC EvoView4G boards have JTAG interface disabled (that is enable MARM JTAG Fuse is ****n in the MSM8255 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL to 1.38.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG4120000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE ****n then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC EvoView4G:
- Solder JTAG cable to HTC EvoView4G JTAG pads;
- Insert battery and connect USB Data cable;
- Make sure HTC EvoView4G is selected in the list of models;
- If you use only battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
http://www.jtagbox.com/wp-content/up...vo_view_4g.jpg
21.03.2012 RIFF JTAG Box Updates:
Whats new:
- Added WORLD FIRST Samsung GT-P6810 Galaxy Tab 7.7 WiFi 16GB
- Added WORLD FIRST HTC Sensation XL X315 / Bass (HTC Runnymede)
Bug fixes:
- Samsung Galaxy i9003 (3 new DLL, with adjusted I/O voltage levels)
- SonyEricsson E15i (ROM not supported bug fixed)
Torrent Tracker:
Remote Helper:
Who rules the galaxy ?
www.jtagbox.com
RIFF JTAG – LG E510 Optimus Hub (LG Univa) Supported
Bug Fix updates
Samsung_I917.dll
-------------------------------------
- added resurrection data for h/w revision 1.3
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
27.03.2012 RIFF JTAG – Samsung SCH-I500 Galaxy S Mesmerize/Fascinate Unbrick Supported
Repairing bricked Samsung SCH-I500 Galaxy S Mesmerize/Fascinate is easy with RIFF Box.
I500 is based on the S5PCxxx Processor (ARM core is Cortex-A8). Please note the adaptive clocking mode (RTCK) is not available on this processor, so make sure to select a fixed TCK frequency.
To establish the JTAG connection attach battery cable and press Power On key.
In case after resurrection the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
To resurrect Samsung I500:
Solder JTAG cable to Samsung I500 JTAG pads;
- Attach battery cable and press Power On key;
- Make sure Samsung I500 is selected in the list of models;
- Make sure a fixed TCK frequency is selected;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
http://www.jtagbox.com/wp-content/up..._mesmerize.jpg
RIFF JTAG – Samsung SCH-i920 Omnia II 8GB Unbrick – Dead Boot repair supported
RIFF JTAG – Samsung SHV-E120S Galaxy S II HD LTE (Samsung Celox) Unbrick – Dead Boot Repair supported
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported
RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported
RIFF JTAG - eMMC Partition Plugin v1.0 Release
RIFF JTAG – eMMC Partition Plugin v1.0 (Qualcomm EBR-MBR based eMMC flash images processing)
Bug Fix
HTC_Sensation_PG58130.dll
-------------------------------------
- fixed bug due to which it said "Supplied data block to be flashed is damaged."
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
RIFF JTAG – Samsung Galaxy Ace – GT-S5830i Unbrick – Boot Repair supported
RIFF JTAG – Samsung Galaxy Mini – GT-S5570i Unbrick – Boot repair supported
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
06.04.2012 RIFF JTAG Updates
Whats new:
Network Router support:
- LinkSys WRT54G Unbrick, Read/Write Flash
Satellite Receivers (STB-s):
- Orton 4100C Unbrick, Read/Write Flash
- EuroSky ES-4100 Unbrick, Read/Write Flash
HTC Phones support:
- HTC Flyer Boot repair, Unlock, CID, ModelID, S-Off, IMEI Update
- HTC Phones bug fix and updates:
- HTC Sensation (HTC Pyramid) S-Off support added
- HTC Evo 3D (HTC Shooter) S-Off support added
- HTC Desire HD DBL reflash support added
- HTC Desire Z DBL reflash support added
RIFF Torrent Tracker updates:
New HTC Full Backups torrent is uploaded and ready for seeding.
New files for following models: HTC 7 Pro (tested with hspl)
HTC Evo 3D (for Liteon camera)
HTC Desire HD (hboot 2.00 with fix for network problem)
HTC Sensation
HTC Kaiser
HTC Surround
HTC Incredible S
Complete list of files:
New files for many new models added.www.riffbox.org
24.04.2012 RIFF JTAG – HTC via USB Cable Support added
Whats new:
Released support for HTC phones based on MSM8x55 CPU, which are enumerated on USB port as “QHUSB_DLOAD” device. Now it’s possible to repair these phones without soldering any wires. Even without opening !
Following models are supported at the moment:
- HTC Desire HD (HTC Ace)
- HTC Desire S (HTC Saga)
- HTC Desire Z (HTC Vision)
- HTC Flyer 3G
- HTC Flyer WiFi
- HTC Evo View 4G
It is possible to force QHUSB_DLOAD mode by disabling Vdd line on eMMC chip. Check Desire S TP info for example. This means, You can work with any MSM8255/MSM8655 based HTC phone, as long as You force it into QHUSB_DLOAD mode.
Follow this procedure if You want to use these updates:
- Connect Your phone to USB port and install QHUSB_DLOAD device driver (C:\Program Files (x86)\RIFF Box JTAG Manager\Drivers\32Bit\QDLOADER)
- Launch JTAG Manager, select appropriate Model DLL and click desired button
- Install “RIFF Box DCCLoader USB Interface” port driver (C:\Users\Admin\Desktop\Drivers_64Bit_WorkedForMe\ Drivers\64Bit\DCCLDR)
- If required, repeat the procedure (sometimes required if device is connected for first time)
We will release USB support for rest of the models on these CPU-s in following days.
To download and install new updates – simply click “Check for Updates” button on Box Service TAB.
27.04.2012 RIFF JTAG – HTC via USB more phones supported
- HTC Thunderbolt USB support added
- HTC Sensation XL USB support added
- HTC Inspire USB support added
- HTC Incredible S USB support added
- HTC Incredible 2 USB support added
These new updates will allow You to use USB cable to perform any operation on listed models. Remember that this work if Your phone is enumerated on USB port as QHUSB_Dload or Qualcomm HS-USB QDLoader device.
In case phone is not enumerated, You might need to use test point method first.
Please visit RIFF FAQ section in to see how to install drivers, and how to find eMMC Vdd test points:
- How to install QHUSB_DLOAD driver
- How to install “RIFF BOX DCCLoader USB Interface Port” Windows 7 64bit driver
If You need to repair phone after replacing eMMC chip, these are the steps:
- Launch eMMC MBR/EBR partitioning tool
- Open desired partitioning file
- Click “Load Image from file”
- Click “Repartition eMMC”
- Close the eMMC plugin
- Click “Resurrection” and select all options to be repaired, including IMEI and CID
- Click “Resurrect”
http://www.jtagbox.com/wp-content/up...ull_repair.jpg
Please click “Check for updates” button to download and install new updates.
www.jtagbox.com
RIFF Box JTAG Manager software setup
This will install following files to Your computer:
- JTAG Manager software v1.43
- RIFF Box Firmware v1.32
- RIFF Box control port driver
- RIFF Box update port driver
- RIFF DCC USBLoader driver
- QUALCOMM QHUSB_DLOAD driver
After You execute setup, it will install all files to desired destination, and launch drivers installer script.
Take note, If You’re using Windows XP, You’ll have to provide drivers location to Hardware Installation Wizard after connecting devices for first time.
RIFF Box – JTAG Revolution
04.05.2012 RIFF JTAG – Samsung SGH-T679 Exhibit II 4G (Samsung Ancora) Unbrick – Dead Boot repair supported
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution
11.05.2012 RIFF JTAG – Samsung SPH-D710 Galaxy S2 Epic Touch 4G (Samsung Within) Unbrick – dead boot repair supported
Repairing bricked Samsung SPH-D710 Galaxy S2 Epic Touch 4G is easy with RIFF Box. Samsung SPH-D710 is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung SPH-D710:
- Solder JTAG cable to Samsung SPH-D710 JTAG pads;
- Connect USB cable to phone and PC;
- Insert battery;
- Make sure Samsung SPH-D710 is selected in the list of models;
- Make sure a fixed TCK frequency is selected;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.
http://www.jtagbox.com/wp-content/up...c_4g_touch.jpg
18.05.2012 RIFF JTAG – Weekend updates:
Whats new:
- Samsung B7320 unbrick/boot repair support added
- HTC Sensation 4G (PG581000) Unbrick, Unlock, S-Off, SuperCID support added
- HTC Sensation (PG581300/PG583101) Unlock support added
- HTC Evo 3D Unlock support added
Bug Fix updates:
- HTC Desire HD Support for new board revisions with hboot 2.xx (No Network problem)
- HTC Wildfire S Proximity sensor fix
RIFF Torrent tracker:
Please click “Check for updates” button in RIFF JTAG Manager to download new files.
RIFF Box FAQ:
RIFF JTAG Box FAQ - RIFF JTAG Error codes and troubleshooting
RIFF JTAG Box FAQ - RIFF JTAG Box setup
RIFF JTAG Box FAQ - JTAG Manager - DCC Read/Write TAB
RIFF JTAG Box FAQ - How to use QUALCOMM eMMC MBR/EBR Partitioning plugin
RIFF JTAG
www.jtagbox.com
23.05.2012 RIFF JTAG – HTC 7 Surround T8788 (HTC Mondrian) Unbrick, Unlock, SuperCID and IMEI repair supported
Repairing bricked HTC Surround (PD26100) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.74.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD26*****’.
To resurrect HTC Surround (PD26100):
- Solder JTAG cable to HTC Surround JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure HTC Surround (PD26100) is selected in the list of models;
- If you use battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
http://www.jtagbox.com/wp-content/up...7_surround.jpg