Riff user Pls. Help me Thans. in adva......

[tanuj]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [ZTE S1602]

Connecting to the dead body...OK
Detected dead body ID: 0x122CE0E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x88C0 (8MB)
Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x32 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x32 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x32 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x0000800000

[sac_gup]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [ZTE S1602]

Connecting to the dead body...OK
Detected dead body ID: 0x122CE0E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x88C0 (8MB)
Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x32 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x32 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x32 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x0000800000

you will be flash with unlok 8mb bin file(resurrector is not working there)
firsh read flash when % is show 2% then stop it & use this address & write flash