Need Samsung S8530 Tested Flash file or Tools.
Thanks in Advance
Br,
HasanaliMomin
Need Samsung S8530 Tested Flash file or Tools.
Thanks in Advance
Br,
HasanaliMomin
Last edited by jamesjerss; 30-05-2014 at 06:24 PM.
@Shivam durga
Link worked but there required Register first after that you can download this files. I hope this is help for you
S8530.png
Please Solution for this Error (Samsung S8530)
Thanks in Advance
Run S8530 Wave II downloader.
Select LSI
Tick Boot Change and and Tick Full Download
Click Boot and select Boot folder: (named as BOOTFILES)
Click AMSS and select : amss.bin
Click Apps and select : apps_compressed.bin
Click Rsrc1 and select : Rsrc_S8530_Open_Europe_Common.rc1
Click Rsrc2 and select : Rsrc2_S8530_Open_Euro_Common (Low/Mid).rc2
Click Factory FS and select : FactoryFs_S8530_Open_Europe_Common.ffs
Click CSC and select : S8530XXXXX.csc
Click SHP APP and select : ShpApp.app
Click FOTA and select : bplib_S8530OpEuroCommon.fota
Link Working Properly...
New Link : Multiloader v5.67
I Try as your Guide but Error Different see picture of Error Samsung S8530...Thank for Reply
s8530.png
can you try with other version file.........
Firmware Update Steps:
Check your current HW and SW version with the following string: *#4986*2650468#
To set download mode on your device, you have to press Volume DOWN + Camera Key and Power Button.
Run S8530 Wave II downloader.
Select LSI
Tick Boot Change and and Tick Full Download
Click Boot and select Boot folder: (named as BOOTFILES)
Click AMSS and select : amss.bin
Click Apps and select : apps_compressed.bin
Click Rsrc1 and select : Rsrc_S8530_Open_Europe_Common.rc1
Click Rsrc2 and select : Rsrc2_S8530_Open_Euro_Common (Low/Mid).rc2
Click Factory FS and select : FactoryFs_S8530_Open_Europe_Common.ffs
Click CSC and select : S8530XXXXX.csc
Click SHP APP and select : ShpApp.app
Click FOTA and select : bplib_S8530OpEuroCommon.fota
After connecting the mobile with PC, Multiloader should find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
Click Download [You will see the downloading progress bar].
After finishing downloading, the mobile will be starting automatically.
Flasher : http://www.4shared.com/rar/e6k-EERx/...ader_V567.html
Samsung S8530 Firmwares:BADA 1.2:- S8530BOKC1 / DTMKC2 Germany T-Mobile- S8530JPKA1 / OJPKA1 Arabic- S8530XEJL4 / CISJL4 Russia
BADA 2.0:- S8530BOLD1 / CROLK1 Croatia T-Mobile
- S8530CXLB2 / PLSLC1 Poland Plus
- S8530NELH2 / DRELH2 Austria 3 Hutchison
- S8530POKH1 / XEFKH1 France
- S8530XELF1 / CISLG1 SER Russia
- S8530XXLA1 / OXFLA2 COA Romania Cosmote
- S8530XXLA1 / OXGLA1 AUT Switzerland- S8530ZCLC2 / OZCLC2 CHN China
Don't spam forum, just HIT button
Selected model: S8530
Selected port: COM5 Z3X BOX Serial Port
Selected port speed: 115200
Searching Samsung USB flash interface... detected COM6
Erasing BOOT_LOADER.mbn... OK
Sending BOOT_LOADER.mbn... OK
Erasing Dbl.mbn... OK
Sending Dbl.mbn... OK
Flashing BOOT files done (time - 00:00:02)
Wait, reset...
Erasing AMSS... OK
Sending AMSS... OK
Erasing APPS... OK
Sending APPS... OK
Erasing RSRC1... OK
Sending RSRC1... OK
Erasing RSRC2... OK
Sending RSRC2... OK
Erasing FFS... OK
Formating FFS... OK
Sending FFS... error
Done with Samsung Tool v.16.9
Done with Samsung Tool v.16.9
s8530.png
Thanks in Advance
can you try with MultiLoader V5.67.......
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks