.::All Setool Problums Post Them Here with Complete Unlock/Flash Log Detail::.

[naveed805]

Hi members,

If you Face any problum using Setool post it Here...Remember One thing Log is must to solve your problum...


Regards,

Naveed

[naveed805]

i will try to solve se tool users problems plz next time post here all ur se tool problems

regards

Naveed

[parot]

i bought setool3 yesterday and installed setool_card but software says card protection error..


br,
parot

[naveed805]

u have to install the egate drivers after the installation open se tool if ur problem will solve then post here results

[parot]

all drivers was installed properlly but after using, closing the prog and opening again card protection error again.....


but the latest setool_card solved it..

br,
parot

[itsmesoul]

with SETOOL i m fail to unlock SE K800i
can anyone help me how to unlock K800i

[keaelite]

with SETOOL i m fail to unlock SE K800i
can anyone help me how to unlock K800i

those unit are not yet supported by setool correct me if im wrong,buy cruiser use logs

[ehsan_s]

Step 1:
select USB as interface. that is REQUIRED.
Step 2:
select K610 as phone model (or any other DB2020 model, they are same)
Step 3:
|settings - check "use server for csca unlock/flash", "do full unlock instead of user code reset for DB2020", fill your login details.
Step 4:
back to semc tab, press unlock, attach phone with pressed "C" (or 2+5) buttons.
Step 5:
wait for signature calculation, it can took about 2 minute. If calculation will fail, your credits will NOT be deducted.
if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.
Step 6:
next, you will be prompted to detach phone and turn it on. do so.
detach phone.
turn it on FULLY
phone will be on 5 locks, that is normal.
Step 7:
connect phone to USB.
if phone will ask you switch to phone mode - switch to phone mode.
it can ask you for drivers,if you not installed them previously.
install all drivers (links below)
be SURE that you install all drivers correctly.
Step 8:
press "test point OK"
procedure will continue,phone will be switched off and unlocked.

!note.
DB2020 unlock supported on both servers .196 and .198
remember, if something will go wrong - you have a backup of security units
for now price for DB2020 unlock 12 credits (36 usd)

[naveed805]

Step 1:
select USB as interface. that is REQUIRED.
Step 2:
select K610 as phone model (or any other DB2020 model, they are same)
Step 3:
|settings - check "use server for csca unlock/flash", "do full unlock instead of user code reset for DB2020", fill your login details.
Step 4:
back to semc tab, press unlock, attach phone with pressed "C" (or 2+5) buttons.
Step 5:
wait for signature calculation, it can took about 2 minute. If calculation will fail, your credits will NOT be deducted.
if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.
Step 6:
next, you will be prompted to detach phone and turn it on. do so.
detach phone.
turn it on FULLY
phone will be on 5 locks, that is normal.
Step 7:
connect phone to USB.
if phone will ask you switch to phone mode - switch to phone mode.
it can ask you for drivers,if you not installed them previously.
install all drivers (links below)
be SURE that you install all drivers correctly.
Step 8:
press "test point OK"
procedure will continue,phone will be switched off and unlocked.

!note.
DB2020 unlock supported on both servers .196 and .198
remember, if something will go wrong - you have a backup of security units
for now price for DB2020 unlock 12 credits (36 usd)

it will cost to u for 1 db2020 = Rs1950

[contact_ihsan]

how to change imei on setool

[ehsan_ilahi2001]

how to change imei on setool

ur answer is here if u read it ur problem is solve after read thread
http://gsm-magic.com/forum/showthread.php?t=1215
http://gsm-magic.com/forum/showthread.php?t=2063

[san21]

how can inlock z301i cid 51
pls. help me

[mauro1947]

how can inlock z301i cid 51
pls. help me

You mean Z310 or Z300???

[hitraj]

I Have A Problem.

When Ever I Go To Go Support Area.
Or
Go From Supporter
For Files Download... It Displays Following Error.

Please Login From Soft Only.

Please Help Me

[williamvirk]

k610 cid52 confg.error after patch unlock i do as shown in the DB2020_CID52_UNLOCK video here is log
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35463701643424 CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35463701643424 CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

bypassing security...
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Administrator\Desktop\R1JE001_1250539_HUT CHISON_TH.ssw
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
full sig complete.
USERCODE RESET TO "0000"
Searching...
Firmware lock check determined.
Elapsed:786 secs.