...:: Se Tool Software Updates And News ::...

[mauro1947]

v0.914014/UNI

- added .vkp processing for cid52 flashpatch
- if anybody experienced problem "bypass archive not found" it must be ok now
- bug on ufs interface with cid52 flashpatch fixed (if anybody using it )

[mauro1947]

while shitto kukuruzer stopped selling free stolen things, we are working:

many k850 r1ca037 langpacks uploaded
some k850 r1ca029 langpacks uploaded

custpacks for k850 uploaded...

and (i wrote it in threads, but nobody listens) - if anybody having problems with ufs/com cid52 bypass - please redownload 014 version from support.
correct distributive has date 21.11.07 and size 37*497*296 bytes)

ps.

a little deviation from topic.

did all of setool2 users wrote "shit" on kukuruzer forum?
you must understand, that it is because of them we have
free cid52 unlock in free tools - they shown to all "how to do it".
ah yes - does ANYBODY believed that kukuruzer made "own" solution ?
as usual - loaders were taken from setool2, while cid52 bypass method was taken from gti.

i hope they will go dead soon enough.
cause looks like they not have lead in their team only fleas

well, not wanting to say anything GOOD about gti - it was ULTRA stupid to SELL that method.

[mauro1947]

v0.914015/UNI

Code:

- from now after first stage of cid52 security bypass
user required to press "ready" to continue
(will greatly helps when doing many phones at once, suggested by AlexG)

- "can't get packet props" after flashing should be fixed now
(still unsure, cause can't repeat it 100% on mine phones,
thx to vasilius for GREAT help during bug investigating)

- some minor bugfixes (yes, Arash, pda+ufs will be good now )

hopefully next version will bring us corrected j110/j120 flashing and unlock.
maybe even t250 will be supported (at least flashing/userlock reset)
well, if all be well, A2 unlock by logs will be enabled too.


ps.
are all setool2 users wrote "shit" on kukuruzer forum ?

[mauro1947]

uploaded fixed versions of flashfiles for j110/j120 - old flashfiles caused phone restart after some time.

i read on forum many messages like "bug in 015, can't connect PDA phone"
mans, are you blind ? can't read ? mentally ill, like miserable kukuruzer team ?
it is clearly written :

please select any COM port as interface

so JUST DO IT - select ANY com port as interface,press desired operation and connect phone to cable.

[mauro1947]

updated script version for cid49/51->cid52 db2020 conversion.

following TACs (first 6-digits of IMEI) supported:

35170701
35170801
35170901
35171001
35194101
35194201
35194301
35220601
35220701
35220801
35240101
35282601
35283601
35283701
35306501
35306601
35342701
35381301
35399601
35457901
35462501
35462601
35463701
35463801
35463901
35464801
35464901
35471601
35489301
35489401
35491101
35536301
35570401
35578501
35601901
35665701
35665801
35715401
35731501
35851601

[mauro1947]

v0.914016/UNI

- added correct network unlock via patch for j110/j120 phones 
  (hehe, world first as far as i know ;) )

  howto: 
   select phone model and press unlock. 
   power on phone, press <**<, enter any code.

  if yours firmware unsupported for patch  - you have two options 
  - read fullflash (start 0 len 3F0000), upload it to rapidshare and PM me link
  - flash any firmware from support and do unlock

- ultrafast and ultrasafe userlock reset added for j1x0,k2x0 phones 
  (select model, press unlock)
- there is two new files in script folder
   j1x0_total_reset.arm - flash it to TOTALLY reset j110/j120 phone
   k2x0_total_reset.arm - flash it to TOTALLY reset k200/k220 phone
   (calltime,usercode,pictures,settings,etc is reset)

- slight cosmetic changes that were requested by arash.

ps.
i will not do "unauthorized phone" repair and other eeprom errors for
j110/j120 - for that use other tools - they deserving own peace of bread ;)

[mauro1947]

"small" update for w960 pda phone...

W960i_HK__R9J005_R1D_R6F41_R6F41_.zip
W960i_ARABIC1__R9J005_R1D_R6F41_R6F40_.zip
W960i_ARABIC2__R9J005_R1D_R6F41_R6F40_.zip
W960i_FRANCE__R9J005_R1D_R6F41_R6F40_.zip
W960i_HEBREW__R9J005_R1D_R6F41_R6F40_.zip
W960i_IT_SWISS__R9J005_R1D_R6F41_R6F40_.zip
W960i_WORLD1__R9J005_R1D_R6F41_R6F40_.zip
W960i_WORLD2__R9J005_R1D_R6F41_R6F40_.zip
W960i_SG__R9J005_R1D_R6F41_R6F41_.zip
W960i_TW__R9J005_R1D_R6F41_R6F41_.zip
W960i_R6F41_CUST_BLX_CDA162034_99_R2A.zip
W960i_R6F41_CUST_RU_CDA162034_39_R2A.zip

[mauro1947]

v0.914018/UNI

- fixed db2020 emptyboard filling (5 locks after emptyboard fill) bug. 
  Great sorry for that.
- many internal rebuilds to reduce memory consumption,etc.
  so be ready for bugs.
- minor bugfixes
- added pnx5230 cid51 unlock by patch, change IMEI,
  crossflashing, complete filesystem support.  
  both dcu60 and com/ufs are supported, while i STRONGLY recommend DCU60
  method requires 1 credit.

  ( that is NOT "gti" method, if someone want to start blabling. 
   Instead,i'm sure that all "lead developers" will use my way 
   and loaders patched by me from that release ;) )

  usage very same as CID49/CID50/CID51 db2012/db2020:
  - check "use server", "alternative security bypass" 
   (that is mandatory), then
  - if want to change IMEI - check 
        "unlock after flash",
        "patch otp<>gdfs check in firmware",
        "allow to change IMEI when unlocking"
  - if want to unlock - check  "unlock after flash"

  note!. 
  when you using com, z310 phone can "stall" on restart phase.
  in that case, remove battery for 3-5 seconds, then insert it back.

  z310 rest files are uploaded on support area,in original rest files folder.

v0.914019/UNI

- A2 gdfs readout was incorrect from the beginning. fixed. thx,arash.
- pair of cosmetic fixes.

here is full distribution
http://rapidshare.com/files/76439434/v0.914019.rar.html

finally - z310 rest files
http://rapidshare.com/files/76437053...ba024.rar.html

v0.914020/UNI

- sometimes setool2 hangs on "Starting up..." session. fixed. 
  thx to arash for reporting and hard testing.

- for fun added "phone branding" readout in identify.

update only (replace old exe starting from 018 version with new)
http://rapidshare.com/files/76591602...14020.rar.html

[mauro1947]

while kukuruzer trying to make pda flashing (hehe, with such temp they will make it in next summer - need i say,that setool2 users were first to enjoy pda flashing from 18-12-2006 ) and tells shits for our beloved setool2, we are working:

r8ba024 firmware updated for s500 phone, uploaded for k550 phone, and started to appear for k610 phone.

gogogogo, "lead programmer", steal 'em all make your "lead"

[mauro1947]

v0.914021/UNI

- added full a2 unlock via server.

usage is extremly same as with cid52 db2012/cid2 pnx5230/cid53 P1:
select phone model
on options, check "use server","do full unlock"
enter yours username/password
back to a2 tab
press unlock
request placed in queue, wait some time (up to 72 hours), retry.
follow program instructions (power on phone, install modem drivers,etc)

- misc bugfixes

rapidshare link: http://rapidshare.com/files/77744342...14021.rar.html

ps.
thx to arash for logo.

[mauro1947]

v0.914022/UNI

- added support for Locosto-based SEMC ODM models: at present it is T250,Z320.
  supported both HS (red) and GP (brown) models, interfaces: com/ufs only

  present features: 
  flashing, flash read, userlock reset, 
  network unlock (z320 is NOT rebooting after unlock :D )
  TA (eeprom) backup auto-creating after each phone boot.
  be warned: 
  booting of locosto-based phones is tricky process - perhaps, 
  you will need to disconnect/connect cable/battery several times before 
  phone will start booting. 
  BE WARNED:
  always select correct model: z320 for z320 phones, t250 for t250 phones
  Keep TA backups !
  if you somehow damage TA area and have no backup - you have dead phone

- fixed rare bug with "old security" pda phones (appears in 021 version)
- some gui changes/fixes/addons
- perhaps, added some bugs ;) so please test and report issues.

rapidshare link
http://rapidshare.com/files/85199416...14022.rar.html

ps.
locosto release was not possible without help of vasilius.
Arash, as usual, made nice logo for setool2. thx, Arash.
thx, someone (perhaps,you are from "rocker team") for finding
security hole in calypso hs/locosto hs chipsets.

[mauro1947]

v0.914023/UNI

- modified locosto hs bypass algo, should be better now 
  (previous algo sometimes producing "romboot not answering" error)
- added flash manufactured output for j110/j120/k200/k220 phones.
- operator digit was swapped in identify output.

http://rapidshare.com/files/85840628...14023.rar.html

[mauro1947]

Z250 firmwares uploaded on support area.
please, select Z320 phone to work with Z250.
when news/bugs will be enough, i'll release version with Z250 model selectable.

[mauro1947]

updated k630 firmware.
added few w890 firmwares (use any A2 model).
finally added z610 r1kh001 firmware.

[mauro1947]

updated j110_j120 simlock patches for latest firmwares
(firmwares will be uploaded shortly)