GUI v0.91380047
interim fixup release.
- critical bug fixed - on some db2020 phones (diff hw ???) flashing was terminating with "subblock NAK" error. should be fixed.
- db2020 identify now displays all information about phone state.
GUI v0.91380047
interim fixup release.
- critical bug fixed - on some db2020 phones (diff hw ???) flashing was terminating with "subblock NAK" error. should be fixed.
- db2020 identify now displays all information about phone state.
GUI v0.91380049
some stable ( ) release and some NEW features.
- fixup for some db2020 mobiles booting (err:36 and so on)
- fixup for some sibley-based (w300/k310/k510/w300/z550/w810) flash break
- new feature. red cid49 phones (db2000/db2010) can now be flashed via USB with ENORMOUS FAST speed using usual dcu60 cable (or miniusb for k600/z800). FROM NOW NO ONE CAN SAY "my XXX box flashing faster than yours setool2" supported ONLY RED CID 49 PHONES.
there is several restrictions.
first.
UNLOCK is working. BUT if yours gdfs is damaged (rewrited from other phone) - you REQUIRED to use com/ufs connections to repair security values.
second.
IMEI change not working because of same reason.
third.
EROM must be intact in order for USB flashing work.
fourth.
no more restriction.
some timings:
fullflash of w810 phone - 360 seconds. (about 700 by uart)
fullflash of w900 phone - 733 seconds. (about 1400 by uart)
great thx for irritating testing goes to : vasilius, lider, sebagsm
ps.
of course - that feature will be immediately copied by other stealers.
fuck them. do your own or insert my copyrights.
well. now you CAN NOT do "you own" - i was first and you are stealers
GUI v0.91380054
- K320 SERVER support added
- FREE USERCODE READ added (press identify) - works for db2000/2010/db2012
- misc. bugfixes
- new bugs (hope not )
K320 R4EA031 firmware and customization packs uploaded.
GUI v0.91380055
- user lock was incorrectly displayed if digit numbers uneven. fixed
- lg3g patching will be faster on SOME firmwares.
- added SERVER-based support for FLASHING, standalone support for usercode read for new SEMC smartphones - m600/m608/w950/w958/p990.
carefully read instruction - that will help you NOT to kill expensive thing.
instructions.
first, you need download needed firmware package.
add it to firmware area on smartphone tab.
check "use server" and enter your login/password.
now, you need install drivers for flashing.
for that, poweron smartphone in fw update mode.
- for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
- for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.
windows will ask you for a drivers. drivers in %setool2 dist%\drivers\HermioneDrivers. i attached a picture how correctly installed drivers must look in device manager.
now, you can press desired operation.
identify - to readout phone information (and userlock)
flash - to flash package.
!note. there is a checkbox named "process PDA update files" if you UNCHECK it - NO CREDIT WILL BE DEDUCTED from your account, but CDA will be UNCHANGED in phone. you got me ? ( got, lol ) yes, that is FREE FLASHING.
!note. if you flashing multiple smartphones, BE SURE THAT DRIVERS ARE INSTALLED BEFORE starting desired operation.
read gdfs - read gdfs for different things.
write gdfs - write gdfs back.
!note. if you write gdfs from other phone, say bye-bye to yours expensive pda.
well, enough.
lets flash'em.
ps.
p990 flashes will be uploaded in next day-two.
GUI v0.91380056
- P990 chinese-based flashfiles failed on USERDATA part. fixed. (chinese flashes updated, you MUST re-download them)
- i decided to reveal some feature for PDA phones.
story:
SEMC PDA phones has two revisions of chips. "new" and "old".
"new" revision has changed security system and can not be made standalone.
"old" revision has just impoved security and can be breached.
so, as small present in upcoming new year, you have now opportunity to work FULLY (rebuild security (unlocking), change IMEI, read/write gdfs, change CDA) with OLD REVISIONS of PDA (and there is a LOT OF THEM) WITHOUT SERVER.
for that, first, you need determine security type (press identify, i attached two screens with old and new security)
if security new - bad luck.
if security old - uncheck use server and do whatever you like
rest files attached, extract them to rest folder.
ps.
my usual fuckoff for all stealers - both commercial and free (se-nse)
do your own, not steal my work.
pls. how can i get creadit on setool pls. tell more details about it
GUI v0.91380062
- otp<>gdfs imei check now supports latest pda firmware
- some internal changes
GUI v0.91380063
- sadly,but in v0.91380063 DB2020 OTP CID51 support was broken, fixed
- added SERVER-BASED FULL PERMANENT DB2020 UNLOCK. how to use.
select USB as interface. that is REQUIRED.
select K610 as phone model (or any other DB2020 model, they are same)
settings - check "use server for csca unlock/flash", "do full unlock instead of usercode reset for db2020", fill your login details.
back to semc tab, press unlock, attach phone with pressed "C" (or 2+5) buttons.
wait for signature calculation, it can took about 2 minute.
if calculation will fail, your credits will NOT be deducted.
if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.
next, backup will be created so you will be able to restore phone if something will go wrong (hardly believe, but who knows...)
next, you will be prompted to detach phone and turn it on.
do so.
detach phone.
turn it on FULLY
phone will be on 5 locks, that is normal.
connect phone to usb.
if phone will ask you switch to phone mode - switch to phone mode.
it can ask you for drivers,if you not installed them previously.
install all drivers (links below)
be SURE that you install all drivers correctly.
press "testpoint ok"
procedure will continue,phone will be switched off and unlocked.
remember, if something will go wrong - you have a backup of security units.
cost of DB2020 unlock is 12 credits.
currently, BOTH servers are supporting DB2020 unlock
as usual, credits will NOT be recovered in case of connection failures.
NOTE! there is STILL REMAIN SERVER-BASED USERCODE RESET FOR DB2020.
it will work, if you UNCHECK option "do full unlock instead of usercode reset for db2020" and press UNLOCK.
because of recent problems with sql server on support area, i will post links to new version and phone drivers here. hosting provider are informed about probles and, hopefully, they will be solved.
phone drivers
http://setool.net/common/phones.rar
GUI v0.91380064
- it was reported, that on some rare db2020 phones you got following error
Code:
loader unlock: executed Backup security data... var not exists Fail Elapsed:22 secs.
it has been fixed.
SEtool2
http://setool.net/common/v0.91380064.rar
GUI v0.91380065
- public testing of db2020 phones revealead a error:
if you previously unlocked any NOT db2020 phone and then attempting to unlock db2020 phone - you will loose 1 credit and phone will be in "red blink" state. of course, backup is created, so you can restore phone back to "live state". such thing has been fixed
B.R.,
Viru
M608
R2A08_CDA162016_95_ACPU_LL_2_5G_CMCC_China
P990
R4A05_CDA162008_68_ACPU_HE_Trade_Hong_Kong
R5A01_CDA162008_59_ACPU_HE_Trade_Thailand
firmwares uploaded on support area
B.R.,
Viru
W950
R3A01_CDA162017_49_ACPU_NI_Trade_Taiwan
firmware uploaded on support area
B.R.,
Viru
from now on calculated signatures stored on server.
what that means?
that means - if, by some accident, you will receive disconnect error (10053,10054,10060) during EROM signature caculation, NEXT time,when you calculate EROM signature for that phone, you will NOT be charged for 6 credits.
B.R.,
Viru
GUI v0.91380066
- during csca unlock we now enumerate only present ports (to be more simple - stage 2 of csca unlock became faster in most cases)
- J220/J230/Z300 phones with "new" security supported (7-digits lock numbers)
- DB2020 CID51 full identify support
- DB2020 CID51 EROM upgrade
- minor bugfixes.
mostly it is cosmetic release, but some intresting things added.
- added strings for several "missing" db2020 models. semc model list sorted
- changed csca unlock stage 2 behaviour - it will search phone now
until phone will be found or until you press stop.
that must help save credits for some ppl.
- changed PDA detection. must be better and faster now.
(remember : attach PDA only when you told to do so)
- changed script command "gdfsread" behaviour -
now if you read several gdfs units from script,
all units will go as one file named %imei%,
instead of old "one file per one unit" behaviour
- setool2 will now save full session logs in directory "logs"
- updated patch-loaders from DB2010/DB2020 (white screen "solution")
- other cosmetic fixes, more info displayed sometimes,etc.
- new bugs, of course. waiting for reports to fix it
tnx for update setool team
br
gudo-gsm
GUI v0.91380069
- profiles now correctly load settings for models when switching only tabs.
- return to old scheme cid/color detection for db2020 usb operations (some users
reports that phone COLOR/CID can't be detected)
- added some models (w880,k550) so yes, yes. you must again remade profiles.
- db2020 empyboard filling supported (because i saw my "friend" on kukuruzer
takes money for that,while it is standalone process and not requires any
special moves, that is unfair and i shall fix it).
quick howto:
-go to empty tab
-select ANY db2020 model
-fill desired IMEI (or not fill if you have not want to write it)
-check WRITE OTP (or not check if you not want to write it)
-select CID49 (required)
-select needed brown2red erom
-press FLASH
-phone now complete retail (especially if you wrote otp) and must be
serviced as any retail db2020 phone (note - NOT USE EROM UPGRADE)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks