SAMSUNG SGH-E250 White SCreen

[mike-larry]

Hi. I have a Samsung SGH-E250 + USB cable + OneNand Flasher + E250XLFA2 firmware. Problem is phone only displays white screen. When load both bin & tfs files, click 'start', but nothing happens. Just says "Power on mobile", which is already charging via usb. No NSPro/other devices, just usb cable. Please help to flash.

[gasan]

this is not software bro its either your flex or lcd try changing flex first and check results. if good then all ok if not then change lcd,problem will be solved

[CSillo]

Hi, All
I have a Samsung SGH-E250 + USB cable + OneNand flasher + E250XLFA1 firmware no other device between PC and phone except USB cable model:PCB200BBE how do I flash my phone OR how do I set the set the IMEI again I made a mistake I used code to reset phone the IMEI is all zero's Please Please help? I am new at this and the cellshop can't or wont help me!

[neilthirumuttam]

E 250 s blank display is mainly due to bad flex cable. test this first


for flashing or resetting it is better to use professional service boxes like
USTpro or nspro or UFS etc

[saqib_islam]

try these solutions 100% Solved Here
E250 White Lcd Blank Display Problem

If you like the post please HIT THANKS BUTTON

[hotrod0530]

can somebodychelp me with sgh d500 white screen.

[PALMOBILE@SAMSUNG]

hi. I have a samsung sgh-e250 + usb cable + onenand flasher + e250xlfa2 firmware. Problem is phone only displays white screen. When load both bin & tfs files, click 'start', but nothing happens. Just says "power on mobile", which is already charging via usb. No nspro/other devices, just usb cable. Please help to flash.

dear mike
here you should rj45 cable or serial cable if you use box
here usb cable not will be used
secendly here your cell have hardware defect,
so pls check ur lcd, lcd connection & flexy cable
here mostly flex cable brecked
so check that

all the best

[LIPU_SEN]

check lcd and its conector

[amiable_j8u]

try these solutions 100% Solved Here
E250 White Lcd Blank Display Problem

If you like the post please HIT THANKS BUTTON

hi sir in the second juper i dont understand where can i connect near that big ic can u help me?