Model : Gfive U855
CPU Type : MTK6253
Project ID: L5AMM21.9.52.1.2T03M0118_M012
Complete Read Info:
Code:Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key RXD=3 TXD=4 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098009E00000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: L5AMM21.9.52.1.2T03M0118_M012
Gfive U855 Flash File For UCT
Model : Dots Mobile D50
CPU Type : MTK6223
Project ID: L132_SB01_DOTS_Y97_T04_V04
Complete Read Info:
Code:Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key RXD=3 TXD=7 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6223, HardwareVer:8A05, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 007F227E220A2201 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: L132_SB01_DOTS_Y97_T04_V04
Dots Mobile D50 Flash File For UCT
Model : Delta 2730i
CPU Type : SPD SC6600L2
Complete Read Info:
Code:Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast... D-=8 D+=9 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM20 Connected...sending boot... FDL test...OK ArmBootMode: 6600700100005A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 ok Reading phone HW info... Read info is done. CPU: SC6600L2 Flash: NOR_ST_M58WR064KT setting the Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A IMEI 1=911107300543122 IMEI 2=911107300583128 --------NOR_FLASH_CONFIG-------- Flash Bank count=1 EFS sector count=6 File sector count=0 Sector size=0x00010000 Flash start addr=0x00000000 Flash size=0x00800000 Fix NV addr=0x00780000 Product information addr=0x007F0000 MMI resource addr=0x00560000 ------Auto Format Address------- Start=0x00790000 Size =0x00060000 Read FS info...done
Delta 2730i SPD Flash File For UCT
Model : Lephone A33
CPU Type : SPD SC6600L7
Complete Read Info:
Lephone A33 3sim SPD Phone Flash FileCode:Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast... D-=8 D+=6 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM13 Connected...sending boot... FDL test...OK ArmBootMode: 6600700900025A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 460800 ok Reading phone HW info... Read info is done. CPU: SC6600L7 Flash: NOR_M36C0W6050T0 setting the Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A IMEI 1=354789043203140 IMEI 2=354789043503143 --------NOR_FLASH_CONFIG-------- Flash Bank count=1 EFS sector count=4 File sector count=0 Sector size=0x00010000 Flash start addr=0x00000000 Flash size=0x00800000 Fix NV addr=0x00760000 Product information addr=0x007F0000 MMI resource addr=0x000003B0 ------Auto Format Address------- Start=0x00770000 Size =0x00080000 Read FS info...done
Model : FLY V60i
CPU Type : MTK6223
Project ID: S1+_V60iv01.02b05
Complete Read Info:
Code:Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key RXD=7 TXD=9 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6223, HardwareVer:8A04, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0001227E22102201 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Get Project ID from phone... Project ID: S1+_V60iv01.02b05
FLY V60i Flash File For UCT
hello bro, tarikul I need g'five n79i flash file. plz upload. thanks
Every Time We Request You To Post Details
CPU Type ????
Project Id Or INFO ???
Gfive N79i SPD Flash File
ok thanks brother I will always remember it. Now I need g'five (t33+cpu mtk 6225 16mb) flash file
here is info
Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240200000000
Nand Flash ID: 0000000000000000
bro plz upload this flash file also for lawow mobile
ArmBootMode: 6600700100006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M30L0T7000T0
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Error: Unknow Signature. Failed to locate the user data partition
plz upload this flash file
bassoon f800 cpu spreadertrum
Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast...
RXD=21 TXD=14
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
plz upload forme x505 flash files. thanks in advance
DEAR SHAIKSHA AFTER A LONG TIME OF WAITING I ADD THE INFO IN MY POST. SORRY FOR MY MISTAKE PLZ UPLOAD THE FLASH FILE
HERE IS INFO Initializing...
DA_LIB_VER_3.6.0.0
It is sensing the pinout fast...
RXD=24 TXD=4
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_M36C0W6050T0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
Error: Get Flash die baseaddress
Last edited by Mubarak Alam; 08-09-2011 at 09:14 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks