dear i need lava a9 flash file for uct box
DA_LIB_VER_3.6.8.5
It is sensing the pinout fast,please hold on the phone Power key
RXD=13 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6235, HardwareVer:8A01, SoftwareVer:8A04
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 00EC0079005A003F
Read Hardware Information is done.
Get Project ID from phone...
Project ID: Lava_A9_India_S020_1004as
Changing baudrate to 921600...
Done.
Dear gsm team i have 1 major problem with my maxx mx 463 phone.it's imei no was invalid.i have write imei 3 times by nokia dead phone.but after 2 days problem is same.i have done flashing or format but problem not solved.....wt i do now..pls help as soon as;;;;;;;;;;;;;;;;;;;; THANKSSSSSSSSSSSSS
change the flash file
r read the file n rewrite the file
n change the imei
u want imei link: http://www.4shared.com/rar/-hXHz8v5/...ator_v100.html
flash link: http://www.ziddu.com/download/10764208/MX463.rar.html
Don't spam forum, just HIT button
Take backup then flash it
download link: http://www.4shared.com/file/lqzhzq02/a9_online.html
Don't spam forum, just HIT button
Model : A960 TV
CPU Type : MTK 6226
Project ID: 072725_702_V1117
Complete Read Info:
A960 TV Flash FileCode:Initializing... DA_LIB_VER_3.6.8.5 It is sensing the pinout fast,please hold on the phone Power key RXD=5 TXD=6 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6226, HardwareVer:8A02, SoftwareVer:8A01 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098004900000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: 072725_702_V1117
Model : Forme D90 SPD
CPU Type : CPU: SC6600L2 Flash: NOR_M36C0W6050T0
Complete Read Info:
Code:Initializing... DA_LIB_VER_3.9.0.0 It is sensing the pinout fast... D-=3 D+=2 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM88 Connected...sending boot... FDL test...OK ArmBootMode: 6600700100005A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6600L2 Flash: NOR_M36C0W6050T0 setting the Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A IMEI 1=352273017386340 IMEI 2=352751019523267 --------NOR_FLASH_CONFIG-------- Flash Bank count=8453895 EFS sector count=245760 File sector count=268435456 Sector size=0x00000000 Flash start addr=0x00000000 Flash size=0x00800040 Fix NV addr=0x00200010 Product information addr=0x00080004 MMI resource addr=0x00020001 ------Auto Format Address------- Start=0x00000000 Size =0x00080004 Read FS info...done
Forme D90 SPD Flash File
Last edited by shaiksha85; 06-01-2012 at 08:06 PM.
Model : GFIVE D68
CPU Type : MTK 6225
Project ID: LB0MM73.8.32.1.5T07M0412_M111
Complete Read Info:
GFIVE D68 Flash FileCode:Initializing... DA_LIB_VER_3.6.8.5 It is sensing the pinout fast,please hold on the phone Power key RXD=2 TXD=3 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6225, HardwareVer:8A05, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 00EC240200000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: LB0MM73.8.32.1.5T07M0412_M111
Model : Gnine U898
CPU Type : SPD CPU: SC6600L3 Flash: NOR_TV00570002xDGB
Complete Read Info:
Code:Initializing... DA_LIB_VER_3.6.8.5 It is sensing the pinout fast... D-=8 D+=6 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM15 Connected...sending boot... FDL test...OK ArmBootMode: 6600700500005A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6600L3 Flash: NOR_TV00570002xDGB setting the Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A IMEI 1=352744040267178 IMEI 2=352744040267186 --------NOR_FLASH_CONFIG-------- Flash Bank count=16 EFS sector count=7 File sector count=0 Sector size=0x00020000 Flash start addr=0x00000000 Flash size=0x01000000 Fix NV addr=0x00EE0000 Product information addr=0x00FE0000 MMI resource addr=0x008C0000 ------Auto Format Address------- Start=0x00F00000 Size =0x000E0000 Read FS info...done
Gnine U898 SPD Flash File
Model : INTEX IN4040
CPU Type : MTK 6223
Project ID: QING-S09_INTEX_L2EN_304_090511_CAM010_MCP128+32_BT_FM
Complete Read Info:
INTEX IN4040 Flash FileCode:Initializing... DA_LIB_VER_3.9.0.0 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=7 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6223, HardwareVer:8A05, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098000300000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: QING-S09_INTEX_L2EN_304_090511_CAM010_MCP128+32_BT_FM Changing baudrate to 921600... Done.
Model : karbonn k409
CPU Type : MTK 6252
Project ID: K409_KARBONN_A231_V11_280911_MP
Complete Read Info:
karbonn k409 Flash FileCode:Initializing... DA_LIB_VER_3.6.8.5 It is sensing the pinout fast,please hold on the phone Power key RXD=2 TXD=3 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6252, HardwareVer:8B00, SoftwareVer:CF00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 00EF006000170000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: K409_KARBONN_A231_V11_280911_MP
Model : karbonn k600
CPU Type : SPD CPU: SC6610/20 Flash: SF_W25Q64DW
Complete Read Info:
Code:Initializing... DA_LIB_VER_3.9.0.0 It is sensing the pinout fast... D-=8 D+=6 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM88 Connected...sending boot... FDL test...OK ArmBootMode: 6610000000125A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_W25Q64DW setting the Flash Parameters... Settings have been completed! setting the Serial Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A IMEI 1=911141100184761 IMEI 2=910575601400468 --------NOR_FLASH_CONFIG-------- Flash Bank count=0 EFS sector count=0 File sector count=0 Sector size=0x00000000 Flash start addr=0x00000000 Flash size=0x00800000 Fix NV addr=0x0000004A Product information addr=0x004F0000 MMI resource addr=0x00000000 ------Auto Format Address------- Start=0x00000000 Size =0x004F0000 Read FS info...done
karbonn k600 SPD 6610 Flash File
Model : karbonn k666
CPU Type : MTK 6225
Project ID: LBBIA01.8.5.1.1T11G0203_M571
Complete Read Info:
karbonn k666 Flash FileCode:Initializing... DA_LIB_VER_3.6.8.5 It is sensing the pinout fast,please hold on the phone Power key RXD=6 TXD=5 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6225, HardwareVer:8A05, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0001227E22202200 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: LBBIA01.8.5.1.1T11G0203_M571 Changing baudrate to 230400... Done.
Model : Lephone C8
CPU Type : SPD CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
Complete Read Info:
Lephone C8 SPD Flash FileCode:Initializing... DA_LIB_VER_3.6.8.5 It is sensing the pinout fast... D-=9 D+=11 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM31 Connected...sending boot... FDL test...OK ArmBootMode: 6600700100005A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6600L2 Flash: NOR_ST_M58WR064KT setting the Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A --------NOR_FLASH_CONFIG-------- Flash Bank count=1 EFS sector count=4 File sector count=0 Sector size=0x00010000 Flash start addr=0x00000000 Flash size=0x00800000 Fix NV addr=0x007A0000 Product information addr=0x007F0000 MMI resource addr=0x00610000 ------Auto Format Address------- Start=0x007B0000 Size =0x00040000 Read FS info...done
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks