C140 Flashing Problem (Dead) ARGENT

[mobile_plus]

At 1st the problep was auto-recive, I changed SIM card Several times,Factory seted the phone,even offed the auto-recive function.but there was no change. then i unlocked the phone by USTPRO2. But still no change.
then i was flashing the phone. at this time flashing was Baricated at 40% to 41% .
i was tried with many files. but always happened same case. some times it shows 45% then back 44%.and shows ..."UNKNOWN ERROR,CODE:CMD"
What is the problem, & what can i do now?
Plssssssssss........... ARGENT.

N.B
My phone is Dead now.

Initializing loaders...
Loading S-Record File ...
Power on mobile !
Phone detected!
Loading setup loader (1/1) ...
Loading RAM (1/1) ...
RAM Loader executed OK!
1 Flash chip banks detected!
0xb0/0x008d0000: Sharp LRS18CK-E_64+16_MLC (8 MB (8388608 Bytes) in 67 sectors)
Changing baudrate...
Loading Flash ...
Programming flash...
Operation failed due to an error!

[elvase]

Try to reflash with this C140 Flash and OptiFlash
http://www.mediafire.com/?sharekey=6...581bbbe22df52c
good luck

[mobile_plus]

Try to reflash with this C140 Flash and OptiFlash
http://www.mediafire.com/?sharekey=6...581bbbe22df52c
good luck

hi brother it's good.
can i flash the phone ,use this softwer by USTPro2 & c140 Rj45 cable?
pls help me.
Thankssssssss

[elvase]

yes you can use UST as interface with RJ45 cable .only chose the corecte com port in Optiflash setting.