Volcano Box Updates

[sahassan82]

VolcanoBox 1.8.9 New Easy Gui - World's 1st Qmobile E995 - Spice M6900 - MTK Andoird

Download Link : VolcanoTool_v1.8.9.rar



What's New ?

◄ MTK Android NAND and EMMC Read flash improve speed
◄ Added MTK 6235 Nor flash Write/Format
◄ Optimize MTK Format
◄ Optimize Coolsand Read flash Auto identify size

Special GIFT for ALL VOLCANOBOX USERS

World's 1st Original Flasher + Flash file for repair DEAD PHONES Public Release !!

QMobile E995 from Pakistan
Spice M6900 from India

We can add these phones into volcanobox but we don't have samples to for Research & Development. As these phones can't be repair of any box yet. i don't know why other can't do. We can do we just need samples. These Files are not Shared before in forums or any in public place so We decide to release it so our Users can Repair their phones easily.

Contents inside Folder...

Folder name : QMobile E995 & Sprice M6900

inside two folders : E995_two_vers_inside and SPICE_M6900_IND_VER11_0

inside SPICE_M6900_IND_VER11_0 : FlashTool_v5.1112.00 this is flasher
inside SPICE_M6900_IND_VER11_0 : TINNO36_10A_GEMINI_PCB01_gprs_MT6236_S00.SPICE_M69 00_IND_VER11_0.bin This is Flash file

inside E995_two_vers_inside : E995 MR1 SW 190112 this is MR1 ver software
inside E995_two_vers_inside : E995_MP2_060212 this is MP2 ver software

inside E995 MR1 SW 190112 : FlashTool_v5.1112.00 this is flasher
inside E995 MR1 SW 190112 : TINNO36_10A_GEMINI_PCB01_gprs_MT6236_S00.E960_MP_F 1_PK_01_18.bin This is Flash file

inside E995_MP2_060212 : FlashTool_v5.1112.00 this is Flasher
inside E995_MP2_060212 : TINNO36_10A_GEMINI_BOOTLOADER this is Flash file

so this is complete package i upload for ALL VolcanoBox users. This is only For Qmobile E995 & Spice M6900. This only help you if after write flash file mobile dead. you can simply flash these file according to your mobile and your mobile will alive and working fine. !!

Qmobile E995 & Spice M6900 is SAFE to format with Volcanobox. your phone will not damaged at ALL. In these phones one major problem came that it's can't send SMS or can't open inbox or can't open WRITE SMS folder. Do not flash etc... just read general parameters and save it some where this you must need to do. make auto format. after format your phone will ok and alive but your phone will say invalid imei. you just write back General parameters. your phone will be 1000% ok and alive. problem came when Users write flash to this type of problem. and they got phone dead. Every These type of error can be solve with just FORMAT but before format must read GENERAL Parameters and save it in safe place.

You can download QMobile E995 & Sprice M6900 Flashers & Flash file from here

http://hotfile.com/dl/190175919/1fa1...M6900.rar.html

md5: dc00b73982a9e215d508795fab63fbcb

Download Link : VolcanoTool_v1.8.9.rar

[Arvind123]

Download Volcano BOX v 1.8.9 From Fast Mediafire Link

VOLCANO BOX V1.8.9 DOWNLOAD

[sahassan82]

VolcanoBox 1.9.0 World's 1st Coolsand CPU ID - MTK Android 4.0.9 Imei Repair & More..

Download Link : VolcanoTool_v1.9.0.rar



VolcanoBox 1.9.0

Whats new ?

World's 1st Automatic recognition of CPU ID coolsand
Coolsand increases the recognition of some new flash type
SPD6530 automatic reading 32M
MTK 65xx Android 4.0.x Imei repair.

Details :

Now VolcanoBox can detect CPU ID from any of phones. whenever you will readinfo you will see log like this.

please press Power on/off button.
CPU ID: 880A 7002
Flash ID : 00C84016
Flash Type: SF_GD25Q32
>>Flash Len :0x400000(4M)

CPU ID: 880A 7002

This is Mobile CPU ID. now this is very important whenever you read flash always save file name with CPU ID and FLASH ID and FLASH TYPE and Flash Len. on next upcoming update we will do Auto. you will not have to Write name with your keyboard. so Now this problem solved that Same phone have different Cpu now no need to open just read info and you can know what cpu is inside. for example

CT1130/1131 is 8806
CT1129D is 8808
CT8851A is 880A ( not confirmed )

Once you use you will know which CPU ID have which CPU. and please collect all details that which cpu id have which cpu and post in it one thread.

MTK 65xx Android 4.0.x Imei repair.
Details:

Mostly All MTK65xx Imei repair can be done with Volcano Box !!

Today we have tested QMobile A8 MTK6577 4.0.4 which was not repairing imei before but now it can !! Also we have tested Clone Iphone 4s MTK 6573 4.0.9 Both imei repair done !!!!

how to do it ?

1st of all. Try to repair imei
if success then Good otherwise read more...
if failed then go to
C:\Program files\VolcanoTeam\Volcano Box\Documents & Help\Samsung Modem Dump\Samsung Root\SuperOneClickv2.3.3-ShortFuse.rar
Extract it
open it
click on Root
check if it's saying your phone is already rooted.
if it's saying then download Super User from Google play
run it.
close it
plug usb and repair imei it must be done.
if it's not saying thta your phone is already rooted
then let it root. if success then repair imei
if still not success then find some root software and root it
after root your phone imei will be repaired !!

I am Collecting All possible root softwares and i will give it to you in next upcoming updates...

Special Thanks to alpesh_12345 for testing with me Clone Iphone 4s 4.0.9

Download Link : VolcanoTool_v1.9.0.rar

[Arvind123]

Volcano Box V1.9.0 Mediafire Easy Download link

VOLCANO BOX V1.9.0 DOWNLOAD

[Arvind123]

Volcano Box V1.9.1 Small Update





Whats new ?


(1) Optimize MTK(Boot V7.1216)Read Infor
(2) modify MTK625A Write Flash
(3) Optimize MTK Android Read special address data



DIRECT DOWNLOAD

[sdtelecom]

VolcanoBox 1.9.2

Whats new ?

Worlds 1st Mstar Flash for unlock !!
Coolsand detection/Pinfind Solved !!
MTK6250 flashing update
Click here to
http://hotfile.com/dl/192129443/d3f7...1.9.2.rar.html

Details :

What is World's 1st Mstar Flash for Unlock ?

Some Mstar phones come to you shop with usercode. you try to read flash and read it's code. you tried but all codes given by Software is incorrect. You plug other boxes and read codes from all boxes and All boxes given codes you tried but all of them are not working. Mobile says Incorrect code. Now you have only 2 ways left !!

1- You search for flash file
2- you search for same working phone

1- you search for flash file. you waist your important time in search and download and flash your phone. after all results is all available files are completable with your phone. you tried lot of Flash files. some files results is your phone power on but on your phone White screen. some Flash file results is your phone is dead and so on.

2- You search for same working phone. you waist lot of your important time for search same phone in market and you didn't get. if you get you read flash and write on faulty phone result is phone not power up cause of Flash ic difference or LCD white or keybaord not working fine and so on

SO WE RELEASE FLASH FOR UNLOCK OPTION IN MSTAR

what you need to do is. simply read flash of your faulty phone by clicking READ FLASH then click on Flash for unlock and click on run. it will ask you for file give path of your read flash and it will start writing.after writing your phone code will be removed !!

This is World's 1st and unique Solution for those Mstar phones which Show Wrong code after you read code from all Chinese boxes. !!

i don't want to write name of boxes and phone model name which we test. cause of i don't want bla bla.... i am not in Fighting mode

VolcanoBox ver 1.9.2 have firmware update !!!!
when you run it 1st time. do not attach any phone with volcano box. also make sure your pc will not shut down or your will not have Electricity failure...

[shaiksha85]

Whats new ?

Coolsand add new Boot_B
Coolsand new boot support auto read write flash
Mstar add new cpu support
Mstar New Flash Added
Fixed Mstar Bug

Details:

Volano box Released Coolsand BOOT_B. What is it?

This is for read and write mostly flash ic auto. don't need to select different Flash type. Keep in mind that this is in BETA state. it could have some problems. if you found any problem please report us.
from now you have two type of Boot. One is "Auto"and one is "Boot_B". whenever you run volcanobox keep in mind what you have select up side of software you can near BOOT FILE button. Select BOOT_B from boot and select AUTO from Flash Type and try to read and write different flash ic. at the moment 8851a and some other flash ic will not work on BOOT_B but in upcoming update we will add. So from now please test for us and report us which Flash ic and which Mcu work AUTO in BOOT_B. in 1.9.4 8851a and some other cpu & Flash type we will add. so now we are working on Fully Automatic Coolsand. Hope you will like us & Will Support us in future too.

Click here to download

VolcanoBox Mirror Support Area

World's Fast Online Unlocking Server

Click here to register and get amazing Discount

[shaiksha85]

Happy Valentines Day

VolcanoBox 1.9.4

Whats new ?

Added RDA 8851 & RDA8852 & some more to new BOOT_B
Added Format & Repair imei to new BOOT_B
Improve Mtk android emmc read & write flash

What is Boot_B ?

Boot_B is for Fully Automated for read & write & format & imei repair !!. This is still in beta. you can try and let us know the bugs and problems. how it will works ?

when ever you got any mobile

Select BOOT_B from BOOT FIle
Select AUTO from Flash Type

and try to do read and write or any other operation which you need to do.

if failed

Select AUTO from BOOT File
Select AUTO from FLASH TYPE

and try to do read and write or any other operation which you need to do.

if failed

Select AUTO from BOOT File
Select your Desire Flash Type

and try to do read and write or any other operation which you need to do.

if failed

Please Report us with all details.

Please make new thread and write which cpu you done on BOOT_B & Flash Type Auto and Which cpu you done on AUTO & Flash Type AUTO. like this we will know what and how we can improve.


Click here to Download
VolcanoBox Mirror Support Area


MTK Universal Drivers

i just make special MTK ALL IN ONE DRIVER. now you don't need to found many drivers. if you have just this ONE DRIVER it will cover your all MTK Drivers needs. This will cover all these needed drivers,

• "MediaTek Inc."
• "MTK USB Port"
• "MTK USB Modem Port"
• "MTK USB Debug Port"
• "MediaTek PreLoader USB VCOM Port"
• "MediaTek DA USB VCOM Port"
• "USB Serial emulation modem driver"

so just download only this ONE Driver and you will have cover all these drivers.

World's Fast Online Unlocking Server

Click here to register and get amazing Discount

[shaiksha85]

whats new ?

Adjust Coolsand new Boot B for Read Flash.
Adjust Coolsand new Boot B for Write Flash.
Adjust Coolsand Find Password Algo.
Added SPD 6610 new IC supported.
Added Manuals/Tutorials to volcano Soft


This is more stable ver for Coolsand. Let me explain you fews things.

1st of all. many users saying volcano is hard to use so we put detailed manual in software. so all can just click and see how to do it .
We will update our manuals on every update so one day all will be in software. this will be too much easy for all of you guys.

check out this GIF




We introduced Coolsand boot B. This is Totally Automatically. you just have to select BOOT_B and Auto from flash type: this is still in beta.

check this gif.




Click here to download

!! Sonyericsson Xperia Unlocking is ready. Contact me privately for Beta Test !!

[Yash_MobileCare]

We are Happy to Announce Grand update
Volcanobox 1.9.6

Whats new ?

1- Added SonyEricsson Xperia phones for Unlock

Here is list

1. x10
2. x10i
3. x10a
4. SO-01B
5. E10i
6. U20
7. X8
8. E15
9. W8
10. E16
11. E16i
12. LT15
13. MK16
14. MT11
15. MT15
16. R800
17. SK17
18. ST15
19. St17
20. ST18
21. WT19
22. Z1
23. SO-01C
24. SO-01D
25. SO-03C
26. S51se
27. LT18

Keep in mind New Security is not supported !!

How To Unlock SonyEricsson Xperia Phones

1st of all you need to install drivers

How to install drivers ?

• Go to Volcanobox\Drivers\SonyXperia
• If you have phone which can be done without TP then open NON_TP_Drivers and install drivers OR if you have phone which can be done with TP then open TP_Drivers and install drivers
• we need to connect the X10 in Flash Mode (it’s called boot mode or Download boot mode)
• Remove battery from phone and insert it again
• Make sure phone is Turned off condition
• Press & Hold “back Button” from phone
• While holding “Back Button” from phone insert/plug Usb cable into phone
• Windows will ask you for drivers. If it’s not install auto then give path of drivers from Volcanobox Folder (Volcanobox\Drivers\SonyXperia)
• Once it’s complete You had done 1st part Now you have to unplug mobile and make it completely power on
• As your mobile powered up Go to settings , Application , Enable “Usb Debugging” ( in some phones USB debugging have in different location for example you need to go in settings, Application, Development, or in some phone setting, Development, )
• After Enable Usb debugging connect usb cable to you phone and let it’s install drivers if not driver not install then give path of drivers from Volcanobox folder.
• As it’s complete you are ready to Unlock your phone.

As Drivers installed you can Start Unlocking

• 1. Open VolcanoBox and click on Xperia
• 2. Make sure There is no Simcard in your mobile
• 3. Make sure SD Card ( memory card ) inserted in the phone
• 4. Make sure your phone have not Android ver 1.6 ( you must use 2.1 or later ver of Android )
• 5. Make sure your phone is NOT rooted
• 6. Make sure your phone not have any Custom rom
• 7. Make sure your Internet Connection is work good and Firewall is turned-ff
• 8. Make sure Usb debugging mode is enabled
• 9. Make sure your Antivirus is turned-off
• 10. Cllck on Get Info from VolcanoBox software
• 11. Remove Battery and insert it again
• 12. Press and hold Back Button
• 13. Insert Usb cable while holding Back Button from phone
• 14. If everything ok you will get info about your phone
• 15. Now Click on Unlock
• 16. Repeat operation from 8 to 10
• 17. When software Ask you Remove Usb cable, complete power on your phone, Connect usb cable to phone, ( make sure Use Debugging is enabled )
• 18. Wait till software complete it’s operation.
• 19. Your phone is unlocked !!

Some Common Problems:



Unlock Not OK or Not Detecting Phone?
Possible causes:

• 1. On Vista or Windows 7 32/64 Bit Windows, VolcanoBox must run as administrator (right click , select "run as administrator")

• 2. Firewall or Antivirus is deleting files . Uninstall VolcanoSoftware and turn off antivirus and reinstall.

Phone shows no service after unlock:

• 1. Remove Battery and wait 1 minute. Insert Battery and power on phone.

Software hangs while unlocking or detecting ADB device
Antivirus has deleted important files. Uninstall software.Turn off Antivirus .Download and install software again

TEST Point pictures & this Detailed manual already inside your volcanobox. just run volcano click on Help Manual button right after connect button. then click on How to Unlock Xperia Phones. you will see all details.

2- Coolsand Read / Write / Format More Stable then ever

Volcano Box introduced Boot_B for Coolsand. this is very stable version ever before. i want to share some thing about Coolsand.

Now Coolsand have two different Boots

1- built-in Auto
2- built-in BOOT_B


2- Built-in Boot_B
is fully Auto you don't need to select any thing. just make sure you have selected Boot_B from Boot and Auto from Flash id. if you want to format also you don't need to write any format address. We had tested lot of phones for formatting with 4mb , 8mb , 16mb, and we success. You can see reports from here
Beta Test Volcano Box v1.9.6 Game ON
If somehow you still face some problem please report us on forum or send me pm


1- Built-in AUTO
This is Auto and Manual both. if you select Auto from boot and Auto from Flash id it will work auto. but if somehow you want to do manual work then you can select Auto from boot and Select your DESIRE FLASH ID from flash id and you can do work.

This is still BETA we research lot of new things and we are working on it soon you guys will have Fully Auto and Fully Bugs free ver and Fully Supported coolsand phones. At the moment we support maximum cpu and maximum flash id which still other not do.



3- Coolsand Read USER Area
4- Coolsand Write USER AREA


Read & Write User Area is for repair signals in coolsand phones, Read & Write user area is for repair Usercode problems in Coolsand phones, Read & Write user area is for repair blinking problems, in other words read & write user area is very use full. in other words you can say it's NV. but it have more than NV area



5- Added Write Flash Security for Coolsand


1. In COOLSAND BOOT_B you try to write any file and volcano say to "you Writing this file is risky" This mean your readed flash is not good and volcano will not write your flash file. this is for avoid after write flash mobile dead. if you still want to write this flash file you can use built-in AUTO and select your desire flash id Volcano will write flash file but not sure your mobile will come alive or not or your mobile become dead.






6- Added More Manuals in Volcano box
7- Adjust Coolsand Find pass algorithm
8- Added Alcatel MTK Android Phones for Direct Unlock & Read Code ( Sp Unlock )

here is list

• OT-S600
• OT-S710
• OT-S800
• OT-J610
• OT-S500
• OT-S810
• OT-S820
• OT-S850

Click here to download Full INSTALLER !!

AT ALL BETA TESTERS. PLEASE REDOWNLOAD IT. WE MODIFY IT.

[Service Team]

VolcanoBox 1.9.7 MTK Android New Boot V7.1304Supported More Flash SPD 6530a new Flash

---

VolcanoBox 1.9.7

Whats new ?

• MTK Android added new Boot V7.1304 ( more flash id is supported )
• Adjust MTK625A Write Flash
• Solve MTK Android Read and Write break-off
• Solve SPD6530 Read Flash bug
• Solve Coolsand Find Pass bug
• More Stable for SPD6530a Cpu !!
  

Click here to download

[shaiksha85]

[Service Team]

World's1st VolcanoBox1.9.9SPD Android Imei,MTK Android Root,MTK Android Custom file

---

VolcanoBox 1.9.9

Truly World's 1st

▬● Truly World's 1st ALL MTK ANDROID ROOT (beta)
▬● Truly World's 1st MTK ANDROID CUSTOM AREA WRITE FLASH
▬● Truly World's 1st MTK ANDROID CUSTOM AREA READ FLASH
▬● Truly World's 1st SPD ANDROID IMEI REPAIR
▬● MTK6253 decryption


How to Root Any MTK Android phone ?

1- Set pinouts or detect pinouts
2- Go to mtk tab
3- Select Boot Built-in-Boot-12
4- Click on read info
5- Untick auto pinfind
6- Make sure your phone com port selected
7- Click on run
8- Read carefully BOOTIMG address
9- Click on Read Flash
10- Write BOOTIMG ADDR into Start Address ( without 0x )
11- Write BOOTIMG length into Flash Size ( without 0x )
12- Click on reset pinouts
13- Click on run
14- Save file
15- Go to Tools
16- Click on One-key Root
17- Click on Select Open
18- Select your read file of BOOTIMG
19- Click on Convert
20- Go to MTK tab
21- Click on write flash
22- Select Built-in-Boot-12
23- Select Converted File
24- Write BootIMG ADDR into START ADDRESS
25- Click on Reset pinouts
26- Click on write
27- After writing Your phone will be ROOTED !!!!!



How to Read and Write Custom/Specific Area File to MTK Android ?

1- Set pinouts or detect pinouts
2- Go to mtk tab
3- Select Boot Built-in-Boot-12
4- Click on read info
5- Untick auto pinfind
6- Make sure your phone com port selected
7- Click on run
8- Read carefully BOOTIMG address ( or your desire area address )
9- Click on Read Flash
10- Write BOOTIMG ( or your desire area address ) ADDR into Start Address ( without 0x )
11- Write BOOTIMG ( or your desire area length ) length into Flash Size ( without 0x )
12- Click on reset pinouts
13- Click on run
14- Save file ( your desire area file read done )



Now how you can write ?

1- Set pinouts or detect pinouts
2- Go to mtk tab
3- Select Boot Built-in-Boot-12
4- Click on write flash
5- Select Your desire File
6- Write BootIMG ( or your desire area address ) ADDR into START ADDRESS
7- Click on Reset pinouts
8- Click on write
9- Your desire File write done !!


How to Write SPD Android imei ?

1- goto detect tab
2-select spd from list
3-attach phone
4-click on detect tab
5- press detect (keep in mind where is D- and D+ gnd)
6- clear pinout
7-close volcano
8- again open volcano
9- mobile connect with volcano jig but volcano phone cable remove to volcano
10- go to detect tab select spd
11- select d-, d+ and gnd manual and set pinout(where it's detect before)
12- go to spd tab
13- R/W IMEI chooses com
14- untick auto detect pinout
15- press these key from keybord to enable imei alt+ctrl+i
16- select boot 6530
17-click on write imei
18-click run
19-new window will be open
20 -choose usb
21-write imei in box
22-click on write imei
23-then connect volcano jig cable jack in volcano


IF WRITE IMEI WITH USB CABLE DISSCONNECT USB + SUPPLY VCC WORK WITH ONLY THREE WiRE D+ D- GND

if write imei usb with usb cable and boot key mobile, dissconect usb + supply (vcc)
usb cable connect only D+ D- GND
1-go to spd tab
2-R/W IMEI chooses com
3-untick auto detect pinout
4-press these key from keybord to enable imei alt+ctrl+i
5-click on write imei
6-click run
7-new window will be open
8-choose usb NOT SELECT ANY COM PORT
9-write imei in box
10-click on write imei
11-then connect press mobile boot key and inseri usb(connect only three wire usb D+ D- GND VCC +SUPPLY NOT CONNECT) AFTER 10 15 SEC YOUR ANY SPD IMEI WRITE

Imei changing is illegal – imei repairing or changing is only for repairing original only !!

Click here to download Video


http://www.youtube.com/watch?v=SBQmZsiZY7w


Click here to download 1.9.9

[Yash_MobileCare]

World's 1st

ALL MTK 65xx
ALL Android 4.x.x
Invalid Imei repair
Imei NULL repair

1 - !!!! Imei repair with META mode Supported !!!!

No Root
No Flash
No hassle
Just one Click

how to repair imei ?

go to MTK TAB
do Enable imei
click on Android tool
click on Run
click on MTK 65xx New Method
Fill imei in boxes
click on Write imei
when software saying searching for port
Insert Usb cable to phone in powered OFF condition !!
waiting software for process complete
after 2 secs your imei repair


Possible problems :

You Drivers are conflicting
You Drivers port are High like 50~200
You didn't install 2nd time drivers
your 1st time drivers com port is ok but 2nd time drivers com port is high
Wrong Drivers installed
Windows problem


Make sure you have Clean pc and Drivers are conflicting.

2 - Detailed VolcanoBox manual updated

Run Volcanobox
Click on Manual Help
Read Detailed volcanobox

Special Thanks to Dipendra Pathak

3 - Adjust MTK Android EMMC flash read, write separate file and get ROOT permission.

4 - Solve some Coolsand phone dead problems after Write flash.

5 - Add 6530 new flash ic supported.

6 - Now we can add any 6530 Unsupported Flash ic.
Just send me pm Picture of Flash ic and screen shot of error on volcano. we will add those unsupported flash ic in next upcoming updates.

click here to download

[Pak_mobile]

World's 1st

ALL MTK 65xx
ALL Android 4.x.x
Invalid Imei repair
Imei NULL repair

1 - !!!! Imei repair with META mode Supported !!!!

No Root
No Flash
No hassle
Just one Click

how to repair imei ?

go to MTK TAB
do Enable imei
click on Android tool
click on Run
click on MTK 65xx New Method
Fill imei in boxes
click on Write imei
when software saying searching for port
Insert Usb cable to phone in powered OFF condition !!
waiting software for process complete
after 2 secs your imei repair


Possible problems :

You Drivers are conflicting
You Drivers port are High like 50~200
You didn't install 2nd time drivers
your 1st time drivers com port is ok but 2nd time drivers com port is high
Wrong Drivers installed
Windows problem




Make sure you have Clean pc and Drivers are conflicting.

2 - Detailed VolcanoBox manual updated

Run Volcanobox
Click on Manual Help
Read Detailed volcanobox

Special Thanks to Dipendra Pathak

3 - Adjust MTK Android EMMC flash read, write separate file and get ROOT permission.

4 - Solve some Coolsand phone dead problems after Write flash.

5 - Add 6530 new flash ic supported.

6 - Now we can add any 6530 Unsupported Flash ic.
Just send me pm Picture of Flash ic and screen shot of error on volcano. we will add those unsupported flash ic in next upcoming updates.





click here to download