3660 and 6600 problem

I've 3660 which off suddenly after 10 minutes, i've do full erase, flash it to ver5.08, write pm, init simlock, format user area 7 times, and full factory reset, but doesn't help. And i do rehot Uem and Zocus IC but doesnt't solve the problem too.

For 6600 it's very strange, the set is dead, i do erase per area successfuly, but if i flash it always error when erase ppm area, the set only blinking if power on, which flash ic is corrupt?

I'm use Jaf, UFS, and mobile ex

please i need solutions

thanx in advance

Quote:

---

Originally Posted by edocomsel

I've 3660 which off suddenly after 10 minutes, i've do full erase, flash it to ver5.08, write pm, init simlock, format user area 7 times, and full factory reset, but doesn't help. And i do rehot Uem and Zocus IC but doesnt't solve the problem too.

For 6600 it's very strange, the set is dead, i do erase per area successfuly, but if i flash it always error when erase ppm area, the set only blinking if power on, which flash ic is corrupt?

I'm use Jaf, UFS, and mobile ex

please i need solutions

thanx in advance

---

pls. post log of both phone here.

same here with 3660 whentry to flash with ufs... this is the error

1st Boot Ok, WD2, UPP: 1081
Fl0: 0x00000000-0x007FFFFF,0001267E,Amd 29BDS643HT
Fl1: 0x02000000-0x027FFFFF,0001267E,Amd 29BDS643HT
Fl2: 0x04000000-0x047FFFFF,0001267E,Amd 29BDS643HT
Algorithm: w3_amd.fia, w3_cbusb.fia, Ver: 4.52.0
Alg Boot Error: 2
Error Data1:
00000000: 9F 04 04 00 01 00 7E 26 02 00 10 01 10 00 02 01 ......~&........
00000010: 00 7E 26 02 00 10 01 10 00 04 01 00 7E 26 02 00 .~&.........~&..
00000020: 10 01 10 00 06 00 00 01 00 00 00 00 00 00 00 C9 ................
00000030: 00 00 EA 70 01 00 EA 73 01 00 EA 76 01 00 EA C5 ...p...s...v....
Error Data2:
00000000: C3 72 00 7E 26 02 00 10 01 10 00 02 01 00 7E 26 .r.~&.........~&
00000010: 02 00 10 01 10 00 04 01 00 7E 26 02 00 10 01 10 .........~&.....
00000020: 00 06 00 00 01 00 00 00 00 00 00 00 C9 00 00 EA ................
00000030: 70 01 00 EA 73 01 00 EA 76 01 00 EA C5 C3 72 00 p...s...v.....r.
Before taking screenshot, expand this window !
Process Failed, Repowering Mobile
..
with jaf here is the log
Getting MCU ID

MCU ID: 0x1081
FLASH ID0: 01007E26 -> AMD Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
FLASH ID1: 01007E26 -> AMD Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
FLASH ID2: 01007E26 -> AMD Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
FLASH ID3: 00000100 -> NOT USED Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
First 16 bytes: C9 00 00 EA 70 01 00 EA 73 01 00 EA 76 01 00 EA
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...


any suggestion

problem solved ......reflowed hot air with flux on UPP.
regards!

3660 try other version in flashing bro