6670 contact retailer

[sundar]

hai i recieved one contact retailer 6670 set i flashed in ufs and jaf also everything going well but after i switch on mobile again it comes contact retailer i tried format in ufs and also like '3+call+*' button nothing can used i tried so many times and also erase fully using fia file also but still having the same problem any one help me plssss...............................

[gavaskar66377]

hai i recieved one contact retailer 6670 set i flashed in ufs and jaf also everything going well but after i switch on mobile again it comes contact retailer i tried format in ufs and also like '3+call+*' button nothing can used i tried so many times and also erase fully using fia file also but still having the same problem any one help me plssss...............................

hi ,
i am also having one same model phone same problem..... i have no solution...
( i think hat is useful to spares )

[Cool_74]

hai i recieved one contact retailer 6670 set i flashed in ufs and jaf also everything going well but after i switch on mobile again it comes contact retailer i tried format in ufs and also like '3+call+*' button nothing can used i tried so many times and also erase fully using fia file also but still having the same problem any one help me plssss...............................

Seems that you did all software steps to solve this kind of problem, means this phone has a hardware failure, first try to rehot the flash chip, normally you need to replace but why not try to rehot first, i mean the Fl0, dont forget to backup your imei on JAF just in case if you need to replace the Fl0

[anumobjay]

i faced similar problem but i did it use erase files and then flash it and then write a good pm if it does not work the heat d462
pls use it the order they are posted

[danish jalal]

hi bro........ rehot uem and flash . eraseing then flashing by...( JAF )100% tested





danish_jalal@yahoo.com

[Only Leo™]

try to format green + * + 3 and On

[Sambora]

hi bro........ rehot uem and flash . eraseing then flashing by...( JAF )100% tested





danish_jalal@yahoo.com

i'm agree with u sirr... coz i had seem this problem before!! i was reball flash then flashing with UFS!! then format with green+3+* plus switch on!!

god luck

[SHIJILFONOTLY]

brother,
use step by step solution
1)connect phone then back up 208 imei zone with jaf
2)erase flash memory.use full ersae file with ufs
3)erase user area.use use user area erase file with ufs
4)write flash lastest vertion with good pm with jaf
5)remove simlock(unlock)
6)disconnect phone then use mannul formating(*+3+calling button+power button)

FORMATING FAILED?
100%hardware problem rehot or reball F10,F11 flash(both is including 1ic)
ic location picture here
then same problem show rehot or reball UEM
post result