Software Solution to shut down, hang, 4blinks, dead, contact retailer

[Bull Mastiff™]

Here is another software solution if you encounter this...
if you have any nokia mobile have one of those problems
Nokia then shut down - Hang - 4Blinks - Dead - Contact Retailer
you can use this method to flash and will have the mobile work again

How???
listen carfuly to me

1- after connect the mobile to the box and press check
2- flash the phone with last version
all of us know that the program first erase 4 area in software .. right
3- after make the full erase and before begein to write press at Stop
4- after that connect the mobile again and check
5- now go to erase key ....and press on it (this operation called Manual Erase)

How we make the manual erase???
manual erase mean that we put in the start address and End address another addresses .... and to know from wherewe got those addresses???

if we take as example Nokia 3650
the 4 area that program erase before write the flash is
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x006FFFFF Erased, Time: 01:10
Area3: 0x02000000-0x023FFFFF Erased, Time: 00:41
Area4: 0x04000000-0x046DDFFF Erased, Time: 01:14

we take the second address in Area1 as Start address and the first address in Area2 as second address and so on

6- after make manual erase reflash with last version
7- init simlocks
8- write pm
9- init simlocks
10- ui factory defaults

This solution is effective if the trouble is software only...


at your service

[seny85]

Do u think griffin platinum have manual erase option cause i m using that box ???

[Bull Mastiff™]

I dont think so sir.. This procedure is tested by me on jaf and ufs box


at your service

[john_john]

sir,have ever done with 6630 contact retailer...
can u post how we repair it...

[JEREMIAH™®]

sir,have ever done with 6630 contact retailer...
can u post how we repair it...

do manual format by *3 send and power on. tested many times

[seny85]

i got my jaf box now i will test it

[.::Haji Bros::.]

sir,have ever done with 6630 contact retailer...
can u post how we repair it...

Dear well, i normally solved this problem a lot of time just i connect the set with cable then box after that i press check and just done User Area Formated.Remember after done User Area Formating don't do UI setting it's may corrupt imei so be carefull. post result if work out.

Best Regards


Haji Bros

Get More From Life

[MUNEEB_AKHTAR_RAZA]

@Haji Bros
Is there any option in ufs to format user area of 6630???i dont think so...So first see and then post!....And as far as 6630 problem concern full flashinghelp me when format area not!

[john_john]

@haji Bros
yes ufs bb5 have no tab for user format area..............
i do only manual format using this *3 send and power on. method

thanks to JERIMIAH>>>>>