LinkBack URL
About LinkBacks
N80-RM-92_EMEA_PR_dp__v17.00_SW4.0707.0.7 & N80_RM-92_APAC_PR_dp_v16.00_SW4.0707.0.7
Code:RM-92 Phone Data Package v17.00 for EMEA Prd (MCU 4.0707.0.7) installation This DataPackage is intended for Care / Service points / Production =================================================================== IMPORTANT: Close Phoenix before starting uninstallation or installation of Data Package. NOTE(1) Phoenix Internal Service Software A 2006.46.0.249 and Flash Update Package 006.038.038 or later are required to flash the images in this release. NOTE(2) To prevent installation of wrong files, it is recommanded to uninstall any previously installed DataPackage. To do this, please go to Start => Settings => Control Panel => Add or Remove Programs => select "RM-92 Phone Data Package EMEA Prd" and click Remove. Removing EMEA Prd Datapackage will also remove all files from C:\Program Files\Nokia\Phoenix\Products\RM-92 NOTE(3) At least 128Mb of SRAM required in the FPSx-prommer! Software version ----------------------------------------- - APE SW 4.0707.0.7 (Prd) - CMT SW rm92_05wk33v40 Requirements ----------------------------------------- - Phoenix Service Software 2006.04.6.130 (or newer) - Flash Update package 006.014.010 (or newer) - FPS8 or FPS10 prommer or USB cable (DKU-2) for USB flashing Included files ---------------------------------------- Flash files: - rm92_05wk33v40 (Cellmo) - N80_rofx_4.0707.0.7-prd.V09 - N80_rofx_4.0707.0.7-prd.V08 - N80_rofx_4.0707.0.7-prd.V07 - N80_rofx_4.0707.0.7-prd.V06 - N80_rofx_4.0707.0.7-prd.V05 - N80_rofx_4.0707.0.7-prd.V04 - N80_rofx_4.0707.0.7-prd.V03 - N80_userarea_4.0707.0.7-prd.U02 - N80_rofx_4.0707.0.7-prd.V02 - N80_4.0707.0.7-prd_western_C00_cc.fpsx - N80_userarea_4.0707.0.7-prd.U01 - N80_rofx_4.0707.0.7-prd.V01 Settings files: - adcreadings.ini (A/D Converter values) - audiocontrol.ini (Controls available to user during audion testing) - bluetooth.ini (Bluetooth Locals) - camera_control.ini (Camera Control) - factoryset.ini (Factory set timeout) - ledcontrol.ini (Led control configuration) - readme_EMEA.txt (this file) - rfconf_RM-92.xml (BB5 Rf features) - rm92settfiles.ini (Settings saving & restoring for Symbian phones) - rm_92.ini (Flashing settings) - rm_92displaytest.ini (Test patterns, light and display controls used during display testing) - rm_92_als.ini (Ambient Light Sensor Calibration) - rm_92_tunings.ini (Target values for Tx tuning) - wlan.ini (values/value ranges for WLAN Tx Tuning) - Variant configuration inifiles (05*.ini) - Label files (*.pcx) - Product profiles (*.pp and *.pd) - RM92.ppu (User interface configuration file for Product Profile tool) - RM92_VRE_config_UDA.xml (Product Verification configuration file) - rm_92lbl.ini (Label settings) Date: 2007-03-28 Copyright © Nokia Corporation. All rights reserved.Code:RM-92 Phone Data Package v16.00 for APAC Prd (MCU 4.0707.0.7) installation This DataPackage is intended for Care / Service points / Production ================================================== ================= IMPORTANT: Close Phoenix before starting uninstallation or installation of Data Package. NOTE(1) Phoenix Internal Service Software A 2006.46.0.249 and Flash Update Package 006.038.038 or later are required to flash the images in this release. NOTE(2) To prevent installation of wrong files, it is recommanded to uninstall any previously installed DataPackage. To do this, please go to Start => Settings => Control Panel => Add or Remove Programs => select "RM-92 Phone Data Package APAC Prd" and click Remove. Removing APAC Prd Datapackage will also remove all files from C:\Program Files\Nokia\Phoenix\Products\RM-92 NOTE(3) At least 128Mb of SRAM required in the FPSx-prommer! Software version ----------------------------------------- - APE SW 4.0707.0.7 (Prd) - CMT SW rm92_05wk33v40 Requirements ----------------------------------------- - Phoenix Service Software 2006.04.6.130 (or newer) - Flash Update package 006.014.010 (or newer) - FPS8 or FPS10 prommer or USB cable (DKU-2) for USB flashing Included files ---------------------------------------- Flash files: - rm92_05wk33v40 (Cellmo) - N80_rofx_4.0707.0.7-prd.V15 - N80_userarea_4.0707.0.7-prd.U02 - N80_rofx_4.0707.0.7-prd.V20 - N80_rofx_4.0707.0.7-prd.V12 - N80_userarea_4.0707.0.7-prd.U01 - N80_rofx_4.0707.0.7-prd.V11 - N80_userarea_4.0707.0.7-prd.U03 - N80_rofx_4.0707.0.7-prd.V14 - N80_4.0707.0.7-prd_western_C00_cc.fpsx - N80_userarea_4.0707.0.7-prd.U04 - N80_rofx_4.0707.0.7-prd.V10 Settings files: - adcreadings.ini (A/D Converter values) - audiocontrol.ini (Controls available to user during audion testing) - bluetooth.ini (Bluetooth Locals) - camera_control.ini (Camera Control) - factoryset.ini (Factory set timeout) - ledcontrol.ini (Led control configuration) - readme_APAC.txt (this file) - rfconf_RM-92.xml (BB5 Rf features) - rm92settfiles.ini (Settings saving & restoring for Symbian phones) - rm_92.ini (Flashing settings) - rm_92displaytest.ini (Test patterns, light and display controls used during display testing) - rm_92_als.ini (Ambient Light Sensor Calibration) - rm_92_tunings.ini (Target values for Tx tuning) - wlan.ini (values/value ranges for WLAN Tx Tuning) - Variant configuration inifiles (05*.ini) - Label files (*.pcx) - Product profiles (*.pp and *.pd) - RM92.ppu (User interface configuration file for Product Profile tool) - RM92_VRE_config_UDA.xml (Product Verification configuration file) - rm_92lbl.ini (Label settings) Date: 2007-03-28 Copyright ?Nokia Corporation. All rights reserved.
U Need to reply to this thread to view link
Originally Posted by truongia
Bookmarks