LinkBack URL
About LinkBacks
Cyclone Shot, "HASH 9DD" Unlock, V30/V300 unlock, Simlock rebuild and more... *
=====================
Installer v1.03
02.01.2010
=====================
- Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.
- Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:
9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
38F312750F686F9FC9B1B3778774A195
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0
- Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)
- After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup
- To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated files
- If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked
- SL Area might be repaired using UNLOCK button for SL2 phones
- RPL Write bugs fixed ("simlock not accepted" after few tries)
- Path "/" problem fixed
- Memory manager updated to v4.94
- New skin manager introduced (6.53) - removed flash files selection bugs
- GUI redesigned a bit
- Nokia Connectivity Cable Driver updated to v7.1.22
- 2760h RM-391 v06.83 Unlock / Relock added
- 2330c RM-512 v09.55 Unlock / Relock added
- 2330c-b RM-513 v09.55 Unlock / Relock added
- 2720f RM-519 v08.42 Unlock / Relock added
- 2720f-b RM-519 v08.42 Unlock / Relock added
- 2720f RM-519 v09.55 Unlock / Relock added
- 2720f-b RM-519 v09.55 Unlock / Relock added
- SX4 Bypass during BB5 Unlock removed, is no needed anymore
- Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field
- After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually
- New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)
- 6220c,3600s booting fixed in new firmware
- New Secure bootloader v02.10 introduced
- New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
- Secure BootAgent v1.00 introduced in new firmware
- Firmware RTOS Code Updated to v6.0.1
- Slightly code optimizations and stability improvments in new firmware
- Secure Bootloader upgrade introduced after box maintenance
- Added support for Cyclone box HW REV A116, A117, A118, A119, A11A, A11B, A11C
Bookmarks