...:: redsn0w All Updates Post Only Here ::...

[jamesjerss]

Redsn0w 0.9.10b6 to jailbreak 5.1 for ip4, iPh3GS, ipad 1 tethered released

Note:tis is tethered jailbreak

iPhone Dev team has just released a new version of Redsn0w to jailbreak iOS 5.1, This is a *tethered* 5.1 jailbreak for non-A5 devices. You’ll need to use redsn0w to “Just Boot” your device every time it power cycles, otherwise jailbreak apps won’t work. Redsn0w 0.9.10b6 supports iPhone 4, iPhone 3GS, iPad 1 and 3rd-generation iPod touch.
If you’ve already updated your iphone or ipad to iOS 5.1, you can jailbreak your iOS device using Redsn0w 0.9.10b6.

Redsn0w 0.9.10b6: https://sites.google.com/a/iphone-de...=0&d=1

[Service Team]

NEWRedsn0w 0.9.10b6 For iOS 5.1 Tethered JailbreakNEW



As the whole tech world waits for today’s Apple Event,
it seems like a good time to remind both veteran and amateur
jail breakers about the fun*****tal rule of jail-breaking: Avoid firmware updates!

In all likelihood we’ll see the GM “gold master” version of 5.1 this week.
DO NOT UPDATE TO 5.1, because you may lose your jailbreak! The rest of this post details the subtleties with this rule,
but if there’s only one message to take home,
it’s the overall “do not update” message! Now for the nitty gritty exceptions:



Soon after 5.1 appears on Apple’s public servers (i.e. iTunes starts to offer it), Apple will stop signing 5.0.1 SHSH blobs.If you have an iPhone4S, the basic rule above is really the only rule: you cannot restore back to 5.0.1 once the 5.0.1 signing window is closed, no matter what (even if you saved your SHSH blobs).

If you have an iPad2 with saved 4.x hashes, you can in fact downgrade to that 4.x but you won’t be able to get to 5.0.1 once the 5.0.1 signing window is closed (even if you saved your 5.0.1 SHSH blobs).
If you have a device earlier than the iPad2, you can downgrade to whatever version you want, as long as you have saved SHSH blobs for that version. You’ll need the assistance of geohot’s limera1n exploit with tools like redsn0w to get into “pwned DFU mode” and bypass the downgrade restriction.


As you can see, it really is a nuanced landscape so it’s sometimes hard to drive the message home to new jailbreakers. But the basic rule is the simplest (and it’s better to be safe than sorry!): If you update to 5.1 you’ll very likely lose your jailbreak, so don’t do it! Exceptions are noted above.

Now let’s see what Apple unveils today!
Update
1: First, please read and re-read the above warnings! With all of that in mind, we realize that some of you non-A5 jailbreakers are itching to get to 5.1, even though there seems to be no compelling new feature there. Because of geohot’s limera1n exploit, those with devices earlier than the iPad2 can test the 5.1 jailbreak waters if they really want to, using redsn0w 0.9.10b6. Here’s what you need to know:

This is a *tethered* 5.1 jailbreak for non-A5 devices. You’ll need to use redsn0w to “Just Boot” your device every time it power cycles, otherwise jailbreak apps won’t work (neither will Safari).

If you use ultrasn0w for your carrier unlock, be sure to use a custom IPSW to get to 5.1 first! Don’t ever restore to a stock Apple IPSW! Use redsn0w’s “Custom IPSW” button to create a NO_BB_* version of the 5.1 IPSW and restore to that instead of the stock one. (That option is available only to 3GS and iPhone4-GSM owners.) ultrasn0w itself will be updated for 5.1 in the next few days (same baseband support, not 5.1’s baseband).




If you’re lucky enough to have an old-boot-ROM 3GS, this jailbreak is actually untethered (RED-SNOW will figure that part out automatically).

While we were at it, we added @pod2g’s steaks4uce exploit to support MC models of the iPod touch 2G (whose last firmware was 4.2.1). So now redsn0w will auto-detect and jailbreak all versions of that older device.

iBooks won’t work until a future update of redsn0w

Here are the RED-SNOW download links:

MAC DOWNLOAD

WINDOWS DOWNLOAD

[colja2002]

great link thnxs this will help me a lot

[Service Team]

RedSn0w has been updated to make zip file names used in its backup feature more compatible with Windows.

The 0.9.10b8b update to redsn0w makes the zip files more compatible with the native Windows explorer (which doesn't like leading slashes in the filenames).

You can download the latest version of RedSn0w from here.

Read More

[zafar_774]

gud To view links or images in this forum your post count must be 1 or greater. You currently have

[shaiksha85]

RedSn0w 0.9.11b1 released for downgrade iphone 4s,ipad3,ipad2

The Dev Team has just released a major update to its popular RedSn0w software, bringing the jailbreak utility to version 0.9.11b1. The update includes a new feature that will allow users to downgrade the firmware on their A5 devices.



From the Dev Team’s blog:

You cannot downgrade without the personalized SHSH blobs for your device at that lower firmware. You need to have fetched those blobs while the signing window was open, using either Cydia’s built-in TSS@Home feature, or with TinyUmbrella. The new Restore screen of redsn0w lets you choose either remote blobs or local ones (for the earlier firmware). If you don’t know where TinyUmbrella put your blobs, TinyUmbrella has a button that will show you (copy them out of that folder and feed them to redsn0w).
The A5 downgrade method actually updates to the latests firmware before downgrading to the earlier one. This process updates your baseband to whatever is newest. DO NOT USE THIS METHOD IF YOU RELY ON UNOFFICIAL UNLOCKS of your iPhone 4S. Those who used the temporary SAM technique to unlock their iPhones to specific SIMs shouldn’t be affected by this baseband update.
This method can be fixed by Apple with a firmware update. It’s a (pleasant) mystery why they haven’t fixed it yet, because reverse-engineering of the restore ramdisk indicates they do know about it. It’s possibly too niche to bother to fix right now.
The least-tested devices with this method are the iPad2,3 and iPad 3,2 (because we don’t have those models). If you do and feel like experimenting, please let us know how it turns out in the comment section below!
This update involves a bunch of new redsn0w code. We recommend sticking to the previous 0.9.10b8b unless you’re specifically using this new feature, until all the bugs are worked out! (Note: If redsn0w gets stuck at the “Waiting for device” stage for more than 30 seconds, you’ve hit a pesky GUI bug…that will be fixed in an upcoming version!)

Windows: https://sites.google.com/a/iphone-de...edirects=0&d=1

Mac: https://sites.google.com/a/iphone-de...edirects=0&d=1

[rahirck]

sir i haw iphone4g(5.1.1 (9b206) )how to jailbrek? plz give me good solution

[shaiksha85]

5x redux

What’s old is new again!

Jailbreakers with devices that pre-date the iPad2 will always be able to downgrade (with SHSH blobs) to previous firmware versions due to geohot’s limera1n exploit, which allows us to bypass the restrictions that Apple places on restores. But until now, that ability has been limited to those older devices (if you have an older device and don’t know how to do that, check the popular tutorial sites or ask in the comments below).

Starting with redsn0w version 0.9.11b1, those with newer devices (iPad2, iPad3, and iPhone4S) can join the downgrade fun too! In a radical departure from previous versions of redsn0w, it now directly supports restoring IPSWs to your device. The first use of this new feature implements a hack that allows A5 downgrades without a bootrom-level exploit.

Some important points:

• You cannot downgrade without the personalized SHSH blobs for your device at that lower firmware. You need to have fetched those blobs while the signing window was open, using either Cydia’s built-in TSS@Home feature, or with TinyUmbrella. The new Restore screen of redsn0w lets you choose either the remote blobs or local ones (for the earlier firmware). If you don’t know where TinyUmbrella put your blobs, TinyUmbrella has a button that will show you (copy them out of that folder and feed them to redsn0w).
• The A5 downgrade method actually updates to the latest firmware before downgrading to the earlier one. This process updates your baseband to whatever is newest. DO NOT USE THIS METHOD IF YOU RELY ON UNOFFICIAL UNLOCKS of your iPhone4S. Those who used the temporary SAM technique to unlock their iPhones to specific SIMs shouldn’t be affected by this baseband update.
• This method can be fixed by Apple with a firmware update. It’s a (pleasant) mystery why they haven’t fixed it yet, because reverse-engineering of the restore ramdisk indicates they do know about it. It’s possibly too niche to bother to fix right now.
• The least-tested devices with this method are the iPad2,3 and iPad3,2 (because we don’t have those models). If you do and you feel like experimenting, please let us know how it turns out in the comment section below!
• This update involves a bunch of new redsn0w code. We recommend sticking to the previous version 0.9.10b8b unless you’re specifically using this new feature, until all the bugs are worked out! (Note: If redsn0w gets stuck at the “Waiting for device” stage for more than 30 seconds, you’ve hit a pesky GUI bug…that will be fixed in an upcoming version!)

Of course all eyes are on @pod2g for his upcoming 5.1 untethered jailbreak. Watch his blog or twitter feed for the latest updates about that, but in the meantime if you accidentally updated your jailbroken A5 device to something later than 5.0.1, feel free to try this new A5 firmware downgrade feature of redsn0w!


Update #1: We accidentally left out one of the two flavors (“9A406”) of 5.0.1 for iPhone4S. It’ll be in the next update, but in the meantime check if Cydia or TU saved your blobs for the other 5.0.1 for iPhone4S (“9A405”). Version 0.9.11b2 adds support for that second “9A406” flavor of 5.0.1 for the iPhone4S

Here are the redns0w download links:

• redsn0w 0.9.11b2 for OS X
• redsn0w 0.9.11b2 for Windows (be sure to run in Administrator mode)

[sajee]

5x redux
What’s old is new again!

Jailbreakers with devices that pre-date the iPad2 will always be able to downgrade (with SHSH blobs) to previous firmware versions due to geohot’s limera1n exploit, which allows us to bypass the restrictions that Apple places on restores. But until now, that ability has been limited to those older devices (if you have an older device and don’t know how to do that, check the popular tutorial sites or ask in the comments below).

Starting with redsn0w version 0.9.11b1, those with newer devices (iPad2, iPad3, and iPhone4S) can join the downgrade fun too! In a radical departure from previous versions of redsn0w, it now directly supports restoring IPSWs to your device. The first use of this new feature implements a hack that allows A5 downgrades without a bootrom-level exploit.

Some important points:

1.ou cannot downgrade without the personalized SHSH blobs for your device at that lower firmware. You need to have fetched those blobs while the signing window was open, using either Cydia’s built-in TSS@Home feature, or with TinyUmbrella. The new Restore screen of redsn0w lets you choose either the remote blobs or local ones (for the earlier firmware). If you don’t know where TinyUmbrella put your blobs, TinyUmbrella has a button that will show you (copy them out of that folder and feed them to redsn0w).

2.The A5 downgrade method actually updates to the latest firmware before downgrading to the earlier one. This process updates your baseband to whatever is newest. DO NOT USE THIS METHOD IF YOU RELY ON UNOFFICIAL UNLOCKS of your iPhone4S. Those who used the temporary SAM technique to unlock their iPhones to specific SIMs shouldn’t be affected by this baseband update.

3.This method can be fixed by Apple with a firmware update. It’s a (pleasant) mystery why they haven’t fixed it yet, because reverse-engineering of the restore ramdisk indicates they do know about it. It’s possibly too niche to bother to fix right now.

4.The least-tested devices with this method are the iPad2,3 and iPad3,2 (because we don’t have those models). If you do and you feel like experimenting, please let us know how it turns out in the comment section below!

5.This update involves a bunch of new redsn0w code. We recommend sticking to the previous version 0.9.10b8b unless you’re specifically using this new feature, until all the bugs are worked out! (Note: If redsn0w gets stuck at the “Waiting for device” stage for more than 30 seconds, you’ve hit a pesky GUI bug…that will be fixed in an upcoming version!)

Update 3:Version 0.9.11b4 completes the support for 5.1.1 on A4 devices and earlier, including proper “Stitching” and “Custom” creation of NO_BB IPSWs.

redsn0w 0.9.11b4 for OS X


redsn0w 0.9.11b4 for Windows

[jamesjerss]

Redsn0w, PwnageTool With iOS 5.1.1 Untethered Jailbreak Support & Ultrasn0w For iOS 5.1.1 Released

iPhone Dev team has just released a new version of Redsn0w and PwnageTool, which includes Rocky Racoon and untethered iOS 5.1.1 jailbreak developed by pod2g and planetbeing that was used in Absinthe 2.0.x jailbreak.

If you were having problems jailbreaking your iOS device with Absinthe 2.0.x then you could try again using Redsn0w 0.9.12b1.



Here're the download links:

Redsn0w 0.9.12b1 Windows (Run in administrator mode)
https://sites.google.com/a/iphone-de...edirects=0&d=1

Redsn0w 0.9.12b1 Mac
https://sites.google.com/a/iphone-de...edirects=0&d=1

PwnageTool 5.1.1 for Mac
https://sites.google.com/a/ipad-dev....edirects=0&d=1

cjinject 0.5.4 for Mac and Windows
https://sites.google.com/a/iphone-de...edirects=0&d=1

[webstile]

thanks at download links!