Post Any Nokia Set's Hardware Problems Here

[jayantassam]

dear sir, thanks 4 advice. i m going 2try it . i will reply soon . good luck..

dear sir , 3110 flash by hwk but failed (before fhash info log shows ok )and no info log shows. i try with mx key (3.4 rev 1.0) no response found.


Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8336(03-05-2010), 1.0.0.12955(03-05-2010)
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
EM0 ID: 00000232
EM1 ID: 00000353
PUBLIC ID: 1F3002078F567D56A3642D8FB0DE44E013E561D9
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
FlashID0: 0089 8981 - 0000 0000 [Intel NU48F256,256 Mbits] type: NOR,RAP
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
RAP PAPUBKEYS is blank/erased.
Original Imei: 00000000000000
Original Product code:


why it's happen ? any solution plz help...

[manojkumarpati]

dear sir , 3110 flash by hwk but failed (before fhash info log shows ok )and no info log shows. i try with mx key (3.4 rev 1.0) no response found.


Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8336(03-05-2010), 1.0.0.12955(03-05-2010)
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
EM0 ID: 00000232
EM1 ID: 00000353
PUBLIC ID: 1F3002078F567D56A3642D8FB0DE44E013E561D9
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
FlashID0: 0089 8981 - 0000 0000 [Intel NU48F256,256 Mbits] type: NOR,RAP
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
RAP PAPUBKEYS is blank/erased.
Original Imei: 00000000000000
Original Product code:


why it's happen ? any solution plz help...

before do any job first scan>bus check>select firmware>fullflash>with 7.30>if not held post log---rebuild imei because imei is corrupted in that set.

[jayantassam]

before do any job first scan>bus check>select firmware>fullflash>with 7.30>if not held post log---rebuild imei because imei is corrupted in that set.

dear sir , thank s for your kind advise . i allready solved it . i allways do as you say but explain me abouut >select firmware>fullflash>with 7.30>.good luck....

[krishna hitech]

Any Problem.....let me help
I'm not perfect...but i m hard work...always help....
so ask for any problems here

nokia 6161 on/off problem

&

1600 nokia always back lights on kindly tell me solution

thank you

[jayantassam]

nokia 6161 on/off problem

&

1600 nokia always back lights on kindly tell me solution

thank you

check settings(1600).flash with latest flasher .good luck..

[Vinod kumar]

Sir i have a nokia n70 k/pad light problem led (print damaged )sir please help me .i am wating for your answer.

[jayantassam]

Sir i have a nokia n70 k/pad light problem led (print damaged )sir please help me .i am wating for your answer.

dear sir,cleanup and join carefully(not easy with duallayer damage print)or change keypad board.good luck...

[manojkumarpati]

dear sir , thank s for your kind advise . i allready solved it . i allways do as you say but explain me abouut >select firmware>fullflash>with 7.30>.good luck....

7.30 means the latest version of rm 237 (3110c nokia)

[arunkumar123]

Any Problem.....let me help
I'm not perfect...but i m hard work...always help....
so ask for any problems here

hello sir, i have prob. of := 1)nokia 5300 white screen , i had tried jumper solutions from this site
but it was not useful........ So, plz give me useful solution.
2)Samsung E250 :- Charging prob. when we connect mobile for charging mobile heated and it have starting prob.
3)Sonyericson w550:- CharCharging prob. when we connect mobile for charging mobile heated
4)Nokia 3500 :- customers mobile keypad ic & Sim ic was broken. so i tried both ic 4 to 5 times but unable to repair both problem
shall i get proper and 100% sucessful solution.

[manojkumarpati]

hello sir, i have prob. of := 1)nokia 5300 white screen , i had tried jumper solutions from this site
but it was not useful........ So, plz give me useful solution.
2)Samsung E250 :- Charging prob. when we connect mobile for charging mobile heated and it have starting prob.
3)Sonyericson w550:- CharCharging prob. when we connect mobile for charging mobile heated
4)Nokia 3500 :- customers mobile keypad ic & Sim ic was broken. so i tried both ic 4 to 5 times but unable to repair both problem
shall i get proper and 100% sucessful solution.

as per my experience i know that in 5300 white display problem is 1-front board,2-flex cable,3-display driver so check one by one but be sure that is last itom is lcd driver
2-e-250 as you wrote it is a shorting problem so check 1-power ic,2-check heating by touching the components when charge on progress it mostly happend for capacitors related to charging section check all above components.
3-same to above case do as above.
4-it is better to put an ic on it insted of jumperig because it too dificult to do so, so put an ic as i tell you fix ic on pcb at its right place on smd heat at-4,air at-2 and donot heat on ic heat arround it your problem solved 100%

[surajboumic]

let me know 5610 charging ways

[One_Hermit]

let me know 5610 charging ways

Whats the Problem..???

Not Charging or anything else...????

[aman_chin2]

hi sir i have a problem in repairing nokia 6070 keypad problem plzzzzzzzzz help me through diagram

[surajboumic]

no charging complaint

[manojkumarpati]

hi sir i have a problem in repairing nokia 6070 keypad problem plzzzzzzzzz help me through diagram

what is your key pad problem is totaly kp not working or some bottons are not working or what? tel briefly