Post Any Nokia Set's Hardware Problems Here

[..::Mr_Fone::..]

6680 keypad jumper needed or solution cos not all keys working

change keypad ic no need make jamper....................

[..::Mr_Fone::..]

nokia 6210 ringer solution or jumper needed

br first of all check ringer then check ringer connectivity use the mouthed i hope u will success .................

[riyaskhanmi]

brother.i have a 1650 dead phone.pls tell any solution to me..................thanks in advance...............

[jumper_master]

brother.i have a 1650 dead phone.pls tell any solution to me..................thanks in advance...............

software damage???? or hardware???

[maheshl]

1112 Mic Problem Make It Jumpers From Handes Free Section Please Post Me

[jumper_master]

thank you very much but my 1100 is not made in FINLAND.. it's is made in hungaria and it don't countain a restance R100... i wanna doing the second solution and seeing... and thnx

check the picture 1st...if your uem seal by glue...is time reball it..

[jumper_master]

br simply change keypad ic no need jamper solution some time lose keypad circut hope u understand ............

you right Mr Fone....this n70 lcd ic & keypad ic is cannot make jumper....it will broke your tracks and missing...so change the new ic

[jumper_master]

how I thought, it doesn't bring to any solution, the problem persists...thanks

if not pc problem ..it must your phone got problem or cable!!

[..::Mr_Fone::..]

1112 Mic Problem Make It Jumpers From Handes Free Section Please Post Me

check this solution i hope it will b ok

[usumits]

Dear sir
MR_FONE

I HAVE NOKIA 1110I ITS WORKING PROPRELY BUT I WASH PCB IN ALMA THEN SET IS DEAD .I HAVE CHEAK BALLERY CONNECTION THAT IS ASLO NOT SHORTING ANY SOLUATION PLZ HELP ME.

[abhishekh53]

thank you very much but my 1100 is not made in FINLAND.. it's is made in hungaria and it don't countain a restance R100... i wanna doing the second solution and seeing... and thnx

MOSTLY 99% UEM FAULTY

[..::Mr_Fone::..]

Dear sir
MR_FONE

I HAVE NOKIA 1110I ITS WORKING PROPRELY BUT I WASH PCB IN ALMA THEN SET IS DEAD .I HAVE CHEAK BALLERY CONNECTION THAT IS ASLO NOT SHORTING ANY SOLUATION PLZ HELP ME.

hi mt8 br try 2 flshe i hope your problem solved if not so then check uem ........!post result soon.....

[jumper_master]

Dear sir
MR_FONE

I HAVE NOKIA 1110I ITS WORKING PROPRELY BUT I WASH PCB IN ALMA THEN SET IS DEAD .I HAVE CHEAK BALLERY CONNECTION THAT IS ASLO NOT SHORTING ANY SOLUATION PLZ HELP ME.

check X2005 VBAT=3.6v then go to j2802 1.8 vpp...check d2200(uem)
This means that the phone does not use any current at all when the supply is connected and/or power key is
pressed. It is assumed that the voltage supplied is 3.6VDC. The UEMCLite will prevent any functionality at battery/
supply levels below 2.9VDC.
and if can flash...use phoenix....it will check what your current board status..

[jumper_master]

its ok but iwant only jumper from hands free section

check this it will help u

[jecsz]

sir...i has 6300 insert mmc...jumper pls