3110c restart

[3gmobile]

3110c rh 237 with verion 6.02 was restarting within 10 to 15 seconds . i flashed the phone with latest firmware 6.60 but phone still same problem restarting now within 2 to 3 sec after startup. i have flashed it once with jaf and once with ufs. but no solution




now what to do brothers

[crack]

3110c rh 237 with verion 6.02 was restarting within 10 to 15 seconds . i flashed the phone with latest firmware 6.60 but phone still same problem restarting now within 2 to 3 sec after startup. i have flashed it once with jaf and once with ufs. but no solution




now what to do brothers

Erase (backup crt area)and Flash with Proper MCU+PPM+CNT and Factory setting....

[DIGITAL BABU]

jast make format than will be 100% oki


thanks

[3gmobile]

i have alresdy formated it but no positive result

[asifakram]

i have install new jaf but it problem update p key i update it but the problem is same

[atar]

i have install new jaf but it problem update p key i update it but the problem is same

BRO TRY TO FULL ERSE THEN YOU WILL FULFLASH WITH JAF

[3gmobile]

Where Can I Fine Its Erase File

[muraliomega]

in jaf just do full factory settings

user settings
leave factory
software upgrade

production tune
100%

[3gmobile]

brother i have already tried all this but it have not solved my problem

[neilthirumuttam]

if 6.60 version not solved restarting
and continuing the situation as b4 ,let us suspect some hardware problem

is this fone a drop case or water tampering ? open the set and check
anyone opned the set b4 ? Clean and dry the system area
unstable sytem may result in speedy restart
and have to check crystal vco power and processor
a hardware surgon inside you have to awaken...
good luck
NEIL

[3gmobile]

if 6.60 version not solved restarting
and continuing the situation as b4 ,let us suspect some hardware problem

is this fone a drop case or water tampering ? open the set and check
anyone opned the set b4 ? Clean and dry the system area
unstable sytem may result in speedy restart
and have to check crystal vco power and processor
a hardware surgon inside you have to awaken...
good luck
NEIL

thanks very much can u show me which one is crystal vco ..............


waiting for ur reply

[belzar]

share the brain share the future

[neilthirumuttam]

rm237__06.60.mcusw
rm237__06.60.ppm_i
rm237__06.60.image_i_blue

recently i solved a similar case with above said files
WITH HWK (in dual line checked)

clock crystal .....you dont know hardware ?
just download higher level schematics from support site
and see IF BLOCK
there it is
regards,
NEIL