Hi dears.,
i have Nokia 3230 set in dead status...,
* first i wash the phone and rehot the total unit..
* then i flash the unit with the help of UFS in that 1st Boot error.,
* then i flash the set in JAF
* This is the log :-
Getting MCU ID
Phone didn't answer with TX line low after UEM reset!
Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
MCU ID: 0xDDDD
Failed! Aborting!
Done!
Phone Restarted...
*then i click flash button
Log here :-
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\products\RM-51\RM51PE506140.C1
PPM Flash file: C:\Program Files\Nokia\Phoenix\products\RM-51\RM51PE506140.03
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,French,Arabic
MCU: C:\Program Files\Nokia\Phoenix\products\RM-51\RM51PE506140.C1
Booting phone...
Phone didn't answer with TX line low after UEM reset!
Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
MCU ID: 0xDDDD
This MCU ID is not supported in chosen flash file...
Error booting phone...
Some one post me the solution.......
THANKS IN ADVANCE...
WBR
NIMA
Bookmarks