Samsung S3850 Flashed Successfully By Z3x
Samsung S3850 Flashed Successfully By Z3x
Samsung E1150i T-mobile Unlocked
Selected model: A177
Selected com port: COM3
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone IMEI: 35433103570096
Phone SW: A177UCIC3
Phone BT ADDR: 44F4-59-385360
Phone SN: RQPSB72023
Deactivated MSL - TRUE
[FREZEE]: 69887840
[NET Lock]: 88919010
[Subset Lock]: 00000000
[SP Lock]: 00000000
[CP Lock]: 00000000
[Sim Lock]: 00000000
[Phone Lock]: 00000000
Read info - ok
Elapsed time: 14 second, sw ver: 3.5.0032
Hi Need To Flash With Boot File Before Unlocking
I Have Attached File In This Post & Also Images Of Unlocking
Before Flashing With Modem File
After Flashing With Modem
I9000_XXJPK_modem_patched_Z3X
Samsung S8500 Flashed Sucessfully
DEAR ALL
HERE IS Successfully IMEI WRITE VIA Z3X BOX
Selected model: C3053
Selected com port: COM2
Selected speed port: 460800
Phone must be ON!
Please, connect phone
Entering TestMode... OK
Start repair IMEI......
SW: C3053DDII1
IMEI: 35468003######
MSL DEACTIVATED - TRUE
Imei store to RAM
Imei store to flash
Repair IMEI - ok
Elapsed time: 13 second, sw ver: 3.5.0034
Regards
Palmobile
@Service Team
SAMSUNG E2230m SIM UNLOCK DONE
-------------------------------------------------------------------------------
Selected model: E2230
Selected com port: COM4
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Phone SN: RWNB978201
Deactivate MSL - OK
Unlock - ok
Elapsed time: 82 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------
network sim lock unlock done
Samsung E3213k Unlocked Sucessfully
Selected Model From List E3210
Cable Used Micro UART
DEAR ALL MATERS
HERE SAMSUNG E2230M SUCCESSFULLY UNLOCK OR FIND USER CODE
JUST SINGLE CLICK ON USER CODE
Selected model: E2230
Selected com port: COM2
Selected speed port: 921600
Phone must be ON
Use UART cable E210 or J750
Bad Ask
Read user code - fail
Elapsed time: 29 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------
Selected model: E2230
Selected com port: COM2
Selected speed port: 921600
Phone must be ON
Use UART cable E210 or J750
Phone IMEI: 3572760XXXX797/00
Phone SN: RUMB4XXXX
Phone SN: E2230MXXXX
Phone user code: 88203537
Read user code - ok
Elapsed time: 5 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------
Regards
Palmobile
@Service Team
Samsung E2232 Unlocked Sucessfully
Cable Used : USB E210 or J750
Use UART cable E210 or J750 ( Follow The Intructions )
Mode Used : Extended Read Codes
Selected model: E2600
Selected com port: COM3
Selected speed port: 921600
Attention !!! Use this operation after flashing phone
Search diag port... OK (COM7)
Phone SN: RV1C15P0MV
Deactivate MSL - OK
Unlock - ok
Elapsed time: 99 second, sw ver: 3.5.0035
first set full flash then unlock
Samsung E3560 Flashed & Unlocked Sucessfully
Model : E3560
Complaint : Sim locked
Note : Direct Unlocking Not Available Need To Full Flash Before Unlocking
Flashing Log
Unlocking Log
DEAR MASTER
HERE IS SUCCESSFULLY IMEI WRITE
Selected model: C5212_m
Selected com port: COM2
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone IMEI: 35335003******
Phone SW: C5212J****
Phone BT ADDR: 0023-D7-0856D3
Phone SN: RW5Z43****
Deactivated MSL - TRUE
Write imei - ok
Repair - ok
Elapsed time: 37 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------
Selected model: C5212_s
Selected com port: COM2
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master IMEI: 35335003******
Phone master SW: C5212JVKB1
Phone master BT ADDR: 0023-D7-0856D3
Phone SN: RW5Z43****
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone slave IMEI: 35335103******
Deactivated MSL - TRUE
Write imei - ok
Repair - ok
Elapsed time: 24 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------
Regards
Palmobile
@Service Team
dear all masters
here the successfully imei write via z3x
Selected model: C5212_m
Selected com port: COM2
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone IMEI: 358XXXXXXXXXX
Phone SW: C5212DDIF1
Phone BT ADDR: 0023-D7-0856D3
Phone SN: RW5Z4XXXXX
Deactivated MSL - TRUE
Write imei - ok
Repair - ok
Elapsed time: 28 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------
Selected model: C5212_s
Selected com port: COM2
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master IMEI: 35335XXXXXXX
Phone master SW: C5212DDIF1
Phone master BT ADDR: 0023-D7-0856D3
Phone SN: RW5Z4XXXXX
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone slave IMEI: XXXXXXXXXXXXXXX
Deactivated MSL - TRUE
Write imei - ok
Repair - ok
Elapsed time: 23 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------
DEAR ALL MASTRS
WHO TOLD THAT E2152I NOT FLASH VIA Z3X
HERE IS THE SUCCESFULLY INFO OF E2152I
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks